A Systematic Survey of Control Techniques and Applications: From Autonomous Vehicles to Connected and Automated Vehicles

Vehicle control is one of the most critical challenges in autonomous vehicles (AVs) and connected and automated vehicles (CAVs), and it is paramount in vehicle safety, passenger comfort, transportation efficiency, and energy saving. This survey attempts to provide a comprehensive and thorough overview of the current state of vehicle control technology, focusing on the evolution from vehicle state estimation and trajectory tracking control in AVs at the microscopic level to collaborative control in CAVs at the macroscopic level. First, this review starts with vehicle key state estimation, specifically vehicle sideslip angle, which is the most pivotal state for vehicle trajectory control, to discuss representative approaches. Then, we present symbolic vehicle trajectory tracking control approaches for AVs. On top of that, we further review the collaborative control frameworks for CAVs and corresponding applications. Finally, this survey concludes with a discussion of future research directions and the challenges. This survey aims to provide a contextualized and in-depth look at state of the art in vehicle control for AVs and CAVs, identifying critical areas of focus and pointing out the potential areas for further exploration

Cognitive Vehicle Platooning in the Era of Automated Electric Transportation

Vehicle platooning is an important innovation in the automotive industry that aims at improving safety, mileage, efficiency, and the time needed to travel. This research focuses on the various aspects of vehicle platooning, one of the important aspects being analysis of different control strategies that lead to a stable and robust platoon. Safety of passengers being a very important consideration, the control design should be such that the controller remains robust under uncertain environments. As a part of the Department of Energy (DOE) project, this research also tries to show a demonstration of vehicle platooning using robots. In an automated highway scenario, a vehicle platoon can be thought of as a string of vehicles, following one another as a platoon. Being equipped by wireless communication capabilities, these vehicles communicate with one another to maintain their formation as a platoon, hence are cognitive. Autonomous capable vehicles in tightly spaced, computer-controlled platoons will lead to savings in energy due to reduced aerodynamic forces, as well as increased passenger comfort since there will be no sudden accelerations or decelerations. Impacts in the occurrence of collisions, if any, will be very low. The greatest benefit obtained is, however, an increase in highway capacity, along with reduction in traffic congestion, pollution, and energy consumption. Another aspect of this project is the automated electric transportation (AET). This aims at providing energy directly to vehicles from electric highways, thus reducing their energy consumption and CO2 emission. By eliminating the use of overhead wires, infrastructure can be upgraded by electrifying highways and providing energy on demand and in real time to moving vehicles via a wireless energy transfer phenomenon known as wireless inductive coupling. The work done in this research will help to gain an insight into vehicle platooning and the control system related to maintaining the vehicles in this formation

Controller with Vehicular Communication Design for Vehicular Platoon System

PhD ThesisTracked Electric Vehicles (TEV) which is a new mass-transport system. It aims to provide a safe, efficient and coordinated traffic system. In TEV, the inter-vehicular distance is reduced to only a quarter of the regular car length and where drive at 200km/h enabling mass transport at uniform speed. Under this requirement, the design of the controller is particularly important. This thesis first developed an innovative approach using adaptive Proportion, integral and derivation (PID) controller using fuzzy logic theory to keep variable time-gap between dynamic cars for platooning system with communication delay. The simulation results presented show a significant improvement in keeping time-gap variable between the cars enabling a safe and efficient flow of the platooning system. Secondly, this thesis investigates the use of Slide Mode Control (SMC) for TEV. It studies different V2V communication topology structures using graph theory and proposes a novel SMC design with and without global dynamic information. The Lyapunov candidate function was chosen to study the impact which forms an integral part for current and future research. The simulation results show that this novel SMC has a tolerance ability for communication delay. In order to present the real time TEV platoon system, a similar PI controller has been utilized in a novel automated vehicle, based on Raspberry Pi, multi-sensors and the designed Remote Control (RC) car. Thirdly, in order to obtain precise positioning information for vehicles in platoon system, this thesis describes Inertial Measurement Unit (IMU)/Global Navigation Satellite System (GNSS) data fusion to achieve a highly precise positioning solution. The results show that the following vehicles can reach the same velocity and acceleration as the leading vehicle in 5 seconds and the spacing error is less than 0.1m. The practical results are in line with those from the simulated experiment

Comprehensive review on controller for leader-follower robotic system

985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies

Adaptive Cooperative Highway Platooning and Merging

As low-cost reliable sensors are introduced to market, research efforts in autonomous driving are increasing. Traffic congestion is a major problem for nearly all metropolis'. Assistive driving technologies like cruise control and adaptive cruise control are widely available today. While these control systems ease the task of driving, the driver still needs to be fully alert at all times. While these existing structures are helpful in alleviating the stress of driving to a certain extent, they are not enough to improve traffic flow. Two main causes of congestion are slow response of drivers to their surroundings, and situations like highway ramp merges or lane closures. This thesis will address both of these issues. A modified version of the widely available adaptive cruise control systems, known as cooperative adaptive cruise control, can work at all speeds with additional wireless communication that improves stability of the controller. These structures can tolerate much smaller desired spacing and can safely work in stop and go traffic. This thesis proposes a new control structure that combines conventional cooperative adaptive cruise control with rear end collision check. This approach is capable of avoiding rear end collisions with the following car, as long as it can still maintain the safe distance with the preceding vehicle. This control structure is mainly intended for use with partially automated highways, where there is a risk of being rear-ended while following a car with adaptive cruise control. Simulation results also shows that use of bidirectional cooperative adaptive cruise control also helps to strengthen the string stability of the platoon. Two different control structures are used to accomplish this task: MPC and PD based switching controller. Model predictive control (MPC) structure works well for the purpose of bidirectional platoon control. This control structure can adapt to the changes in the plant with the use of a parameter estimator. Constraints are set to make sure that the controller outputs are always within the boundaries of the plant. Also these constraints assures that a certain gap will always be kept with the preceding vehicle. PD based switching controller offers an alternative to the MPC structure. Main advantage of this control structure is that it is designed to be robust to certain level of sensor noise. Both these control structures gave good simulation results. The thesis makes use of the control structures developed in the earlier chapters to continue developing structures to alleviate traffic congestions. Two merging schemes are proposed to find a solution to un-signaled merging and lane closures. First problem deals with situations where necessary levels of communication is not present to inform surrounding drivers of merging intention. Second structure proposes a merging protocol for cases where two platoons are approaching a lane closure. This structure makes use of the modified cooperative adaptive cruise control structures proposed earlier in the thesis

Hierarchical wireless framework for real-time collaborative generation and distribution of telemetry data

This project introduces a novel multidisciplinary approach combining Vehicular Ad Hoc Networks and Granular Computing, to the data processing and information generation problem in large urban traffic systems. It addresses the challenge of realtime information generation and dissemination in such systems by designing and investigating a hierarchical real-time information framework. The research work is complemented by designing and developing a simulator for such a system, which provides a simulation environment for the model developed. The proposed multidisciplinary hierarchical real-time information processing and dissemination system framework utilises results from two different areas of study, which are Vehicular Ad Hoc Networks (VANETS) and Granular Computing concepts. Furthermore, a new geographically constrained VANET topology for information generation is proposed, simulated and investigated