Design and Validation of a Software Defined Radio Testbed for DVB-T Transmission

This paper describes the design and validation of a Software Defined Radio (SDR) testbed, which can be used for Digital Television transmission using the Digital Video Broadcasting - Terrestrial (DVB-T) standard. In order to generate a DVB-T-compliant signal with low computational complexity, we design an SDR architecture that uses the C/C++ language and exploits multithreading and vectorized instructions. Then, we transmit the generated DVB-T signal in real time, using a common PC equipped with multicore central processing units (CPUs) and a commercially available SDR modem board. The proposed SDR architecture has been validated using fixed TV sets, and portable receivers. Our results show that the proposed SDR architecture for DVB-T transmission is a low-cost low-complexity solution that, in the worst case, only requires less than 22% of CPU load and less than 170 MB of memory usage, on a 3.0 GHz Core i7 processor. In addition, using the same SDR modem board, we design an off-line software receiver that also performs time synchronization and carrier frequency offset estimation and compensation

Realizing Software Defined Radio - A Study in Designing Mobile Supercomputers.

The physical layer of most wireless protocols is traditionally implemented in custom hardware to satisfy the heavy computational requirements while keeping power consumption to a minimum. These implementations are time consuming to design and difficult to verify. A programmable hardware platform capable of supporting software implementations of the physical layer, or Software Defined Radio (SDR), has a number of advantages. These include support for multiple protocols, faster time-to-market, higher chip volumes, and support for late implementation changes. The challenge is to achieve this under the power budget of a mobile device. Wireless communications belong to an emerging class of applications with the processing requirements of a supercomputer but the power constraints of a mobile device -- mobile supercomputing. This thesis presents a set of design proposals for building a programmable wireless communication solution. In order to design a solution that can meet the lofty requirements of SDR, this thesis takes an application-centric design approach -- evaluate and optimize all aspects of the design based on the characteristics of wireless communication protocols. This includes a DSP processor architecture optimized for wireless baseband processing, wireless algorithm optimizations, and language and compilation tool support for the algorithm software and the processor hardware. This thesis first analyzes the software characteristics of SDR. Based on the analysis, this thesis proposes the Signal-Processing On-Demand Architecture (SODA), a fully programmable multi-core architecture that can support the computation requirements of third generation wireless protocols, while operating within the power budget of a mobile device. This thesis then presents wireless algorithm implementations and optimizations for the SODA processor architecture. A signal processing language extension (SPEX) is proposed to help the software development efforts of wireless communication protocols on SODA-like multi-core architecture. And finally, the SPIR compiler is proposed to automatically map SPEX code onto the multi-core processor hardware.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/61760/1/linyz_1.pd

Architecture and Analysis for Next Generation Mobile Signal Processing.

Mobile devices have proliferated at a spectacular rate, with more than 3.3 billion active cell phones in the world. With sales totaling hundreds of billions every year, the mobile phone has arguably become the dominant computing platform, replacing the personal computer. Soon, improvements to today’s smart phones, such as high-bandwidth internet access, high-definition video processing, and human-centric interfaces that integrate voice recognition and video-conferencing will be commonplace. Cost effective and power efficient support for these applications will be required. Looking forward to the next generation of mobile computing, computation requirements will increase by one to three orders of magnitude due to higher data rates, increased complexity algorithms, and greater computation diversity but the power requirements will be just as stringent to ensure reasonable battery lifetimes. The design of the next generation of mobile platforms must address three critical challenges: efficiency, programmability, and adaptivity. The computational efficiency of existing solutions is inadequate and straightforward scaling by increasing the number of cores or the amount of data-level parallelism will not suffice. Programmability provides the opportunity for a single platform to support multiple applications and even multiple standards within each application domain. Programmability also provides: faster time to market as hardware and software development can proceed in parallel; the ability to fix bugs and add features after manufacturing; and, higher chip volumes as a single platform can support a family of mobile devices. Lastly, hardware adaptivity is necessary to maintain efficiency as the computational characteristics of the applications change. Current solutions are tailored specifically for wireless signal processing algorithms, but lose their efficiency when other application domains like high definition video are processed. This thesis addresses these challenges by presenting analysis of next generation mobile signal processing applications and proposing an advanced signal processing architecture to deal with the stringent requirements. An application-centric design approach is taken to design our architecture. First, a next generation wireless protocol and high definition video is analyzed and algorithmic characterizations discussed. From these characterizations, key architectural implications are presented, which form the basis for the advanced signal processor architecture, AnySP.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86344/1/mwoh_1.pd

Real-Time Generation of Standard-Compliant DVB-T Signals

This paper proposes and discusses two software implementations of the DVB-T modulator, using C++ and MATLAB, respectively. All the key features of the DVB-T standard are included. The C++ DVB-T modulator, incorporated into the Iris framework developed by Trinity College of Dublin, works in real time on an Intel Core i7 2.4 GHz CPU with the Iris testbed. The MATLAB-based DVB-T modulator is coupled with a receiver implementation with channel estimation, equalization, soft-output demapping and channel decoding. The validation step demonstrates that the proposed DVB-T software implementations generate standard-compliant DVB-T signals that are correctly received by commercially available TV sets and USB dongles. The software code for the Iris-based C++ modulator, and for the MATLAB-based modulator and receiver, has been made publicly available under the GNU license

Fast Memory-Based Processing in Software-Defined Radios

Negli ultimi anni le Software Defined Radio sono state un argomento di ricerca di primo piano nell'ambito dei sistemi di trasmissione radio. Molti e variegati paradigmi implementativi sono stati concepiti e proposti, con soluzioni capaci di spaziare da sistemi basati su Field Programmable Gate Array (FPGA) a implementazioni ottenute mediante un singolo General Purpose Processor (GPP) passando per dispositivi caratterizzati dalla presenza computazionalmente preponderante di un Digital Signal Processor (DSP) o da architetture miste. Tali soluzioni rappresentano punti di equilibrio diversi dell'inevitabile compromesso tra flessibilità e capacità computazionale del sistema di trasmissione implementato, comprimendo in qualche modo l'aspirazione ad un sistema radio universale propria del concetto originario dell'SDR. A questo riguardo, le soluzioni SDR basate su GPP rappresentano il modello implementativo maggiormente desiderabile in quanto costituiscono l'alternativa più flessibile ed economica tra tutte le tipologie di SDR. Ciò nonostante, la scarsa capacità computazionale ha sempre limitato l'adozione di questi sistemi in scenari produttivi di vasta scala. Se convenientemente applicati entro il contesto di sviluppo SDR, concetti classici noti in informatica sotto la denominazione collettiva di space/time trade-off possono essere di enorme aiuto quando si cerchi di mitigare un simile problema. Traendo ispirazione da detti concetti, nonché estendendoli ed applicandoli all'abito dell'SDR, questa tesi sviluppa e presenta una tecnica di programmazione specifica per software radio chiamata Memory Acceleration (MA) che, mediante un uso estensivo delle risorse di memoria disponibili a bordo di un tipico sistema di calcolo general purpose, può fornire alle SDR convenzionali basate su GPP fattori di accelerazione sostanziali (circa un ordine di grandezza) senza ridurne la peculiare flessibilità. Alcune rilevanti implementazioni di sistemi SDR capaci di lavorare in tempo reale su processori GPP consumer-grade realizzate in tecnica MA sono descritte in dettaglio entro questo lavoro di tesi e fornite come prova della reale efficacia del concetto proposto

A Programmable, Scalable-Throughput Interleaver

The interleaver stages of digital communication standards show a surprisingly large variation in throughput, state sizes, and permutation functions. Furthermore, data rates for 4G standards such as LTE-Advanced will exceed typical baseband clock frequencies of handheld devices. Multistream operation for Software Defined Radio and iterative decoding algorithms will call for ever higher interleave data rates. Our interleave machine is built around 8 single-port SRAM banks and can be programmed to generate up to 8 addresses every clock cycle. The scalable architecture combines SIMD and VLIW concepts with an efficient resolution of bank conflicts. A wide range of cellular, connectivity, and broadcast interleavers have been mapped on this machine, with throughputs up to more than 0.5 Gsymbol/second. Although it was designed for channel interleaving, the application domain of the interleaver extends also to Turbo interleaving. The presented configuration of the architecture is designed as a part of a programmable outer receiver on a prototype board. It offers (near) universal programmability to enable the implementation of new interleavers. The interleaver measures 2.09 mm2 in 65 nm CMOS (including memories) and proves functional on silicon