Typical Heterogeneous Network Deployment in Green Cellular Networks

Energy efficiency in cellular networks is growing and emerging concern for cellular operators and it is called green cellular networks. It not only maintain profitability, but also to reduce the overall environment effects to give a green environment. This raising trend of achieving energy efficiency in cellular networks depends upon the heterogeneous network deployment motivating the standardization authorities. Network operators to continuously explore future technologies in order to bring improvements to the whole network infrastructure to give good and green infrastructure to the word. The survey of this article, we present a brief survey of methods to improve the power efficiency of cellular networks, exploit some new research issues and challenges and suggestion of some techniques to enable an energy efficient or "green" cellular network. All the base stations absorbs maximum portion of the total energy used in a cellular system, we will first provide a comparative survey on techniques to obtain energy savings in base stations. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

How much energy will your NGN consume? A model for energy consumption in next generation access networks: The case of Spain

The contribution to global energy consumption of the information and communications technology (ICT) sector has increased considerably in the last decade, along with its growing relevance to the overall economy. This trend will continue due to the seemingly ever greater use of these technologies, with broadband data traffic generated by the usage of telecommunication networks as a primary component. In fact, in response to user demand, the telecommunications industry is initiating the deployment of next generation networks (NGNs). However, energy consumption is mostly absent from the debate on these deployments, in spite of the potential impact on both expenses and sustainability. In addition, consumers are unaware of the energy impact of their choices in ultra-broadband services. This paper focuses on forecasting energy consumption in the access part of NGNs by modelling the combined effect of the deployment of two different ultra-broadband technologies (FTTH-GPON and LTE), the evolution of traffic per user, and the energy consumption in each of the networks and user devices. Conclusions are presented on the levels of energy consumption, their cost and the impact of different network design parameters. The effect of technological developments, techno-economic and policy decisions on energy consumption is highlighted. On the consumer side, practical figures and comparisons across technologies are provided. Although the paper focuses on Spain, the analysis can be extended to similar countries

GPON and V-band mmWave in green backhaul solution for 5G ultra-dense network

Ultra-dense network (UDN) is characterized by massive deployment of small cells which resulted into complex backhauling of the cells. This implies that for 5G UDN to be energy efficient, appropriate backhauling solutions must be provided. In this paper, we have evaluated the performance of giga passive optical network (GPON) and V-band millimetre wave (mmWave) in serving as green backhaul solution for 5G UDN. The approach was to first reproduce existing backhaul solutions in Very Dense Network (VDN) scenario which served as benchmark for the performance evaluation for the UDN scenario. The best two solutions, GPON and V-band solutions from the VDN were then deployed in 5G UDN scenario. The research was done by simulation in MATLAB. The performance metrics used were power consumption and energy efficiency against the normalized hourly traffic profile. The result revealed that GPON and V-band mmWave outperformed other solutions in VDN scenario. However, this performance significantly dropped in the UDN scenariodue to higher data traffic requirement of UDN compared to VDN. Thus, it can be concluded that GPON and V-band mmWave are not best suited to serve as green backhaul solution for 5G UDN necessitating further investigation of other available backhaul technologies

ENERGY EFFICIENCY VIA HETEROGENEOUS NETWORK

The mobile telecommunication industry is growing at a phenomenal rate. On a daily basis, there are continuous inflow of mobile users and sophisticated devices into the mobile network. This has triggered a meteoric rise in mobile traffic; forcing network operators to embark on a series of projects to increase the capacity and coverage of mobile networks in line with growing traffic demands. A corollary to this development is the momentous rise in energy bills for mobile operators and the emission of a significant amount of CO2 into the atmosphere. This has become worrisome to the extent that regulatory bodies and environmentalist are calling for the adoption of more “green operation” to curtail these challenges. Green communication is an all-inclusive approach that champions the cause of overall network improvement, reduction in energy consumption and mitigation of carbon emission. The emergence of Heterogeneous network came as a means of fulfilling the vision of Green communication. Heterogeneous network is a blend of low power node overlaid on Macrocell to offload traffic from the Macrocell and enhance quality of service of cell edge users. Heterogeneous network seeks to boost the performance of LTE-Advanced beyond its present limit, and at the same time, reduce energy consumption in mobile wireless network. In this thesis, we explore the potential of heterogeneous network in enhancing the energy efficiency of mobile wireless network. Simulation process sees the use of a co-deployment of Macrocell and Picocell in cluster (Hot spot) and normal scenario. Finally, we compared the performance of each scenario using Cell Energy Efficiency and the Area Energy Efficiency as our performance metricfi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Smart performance optimization of energy-aware scheduling model for resource sharing in 5G green communication systems

This paper presents an analysis of the performance of the Energy Aware Scheduling Algorithm (EASA) in a 5G green communication system. 5G green communication systems rely on EASA to manage resource sharing. The aim of the proposed model is to improve the efficiency and energy consumption of resource sharing in 5G green communication systems. The main objective is to address the challenges of achieving optimal resource utilization and minimizing energy consumption in these systems. To achieve this goal, the study proposes a novel energy-aware scheduling model that takes into consideration the specific characteristics of 5G green communication systems. This model incorporates intelligent techniques for optimizing resource allocation and scheduling decisions, while also considering energy consumption constraints. The methodology used involves a combination of mathematical analysis and simulation studies. The mathematical analysis is used to formulate the optimization problem and design the scheduling model, while the simulations are used to evaluate its performance in various scenarios. The proposed EASM reached a 91.58% false discovery rate, a 64.33% false omission rate, a 90.62% prevalence threshold, and a 91.23% critical success index. The results demonstrate the effectiveness of the proposed model in terms of reducing energy consumption while maintaining a high level of resource utilization.© 2024 The Authors. The Journal of Engineering published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.fi=vertaisarvioitu|en=peerReviewed

Energy sustainable paradigms and methods for future mobile networks: A survey

In this survey, we discuss the role of energy in the design of future mobile networks and, in particular, we advocate and elaborate on the use of energy harvesting (EH) hardware as a means to decrease the environmental footprint of 5G technology. To take full advantage of the harvested (renewable) energy, while still meeting the quality of service required by dense 5G deployments, suitable management techniques are here reviewed, highlighting the open issues that are still to be solved to provide eco-friendly and cost-effective mobile architectures. Several solutions have recently been proposed to tackle capacity, coverage and efficiency problems, including: C-RAN, Software Defined Networking (SDN) and fog computing, among others. However, these are not explicitly tailored to increase the energy efficiency of networks featuring renewable energy sources, and have the following limitations: (i) their energy savings are in many cases still insufficient and (ii) they do not consider network elements possessing energy harvesting capabilities. In this paper, we systematically review existing energy sustainable paradigms and methods to address points (i) and (ii), discussing how these can be exploited to obtain highly efficient, energy self-sufficient and high capacity networks. Several open issues have emerged from our review, ranging from the need for accurate energy, transmission and consumption models, to the lack of accurate data traffic profiles, to the use of power transfer, energy cooperation and energy trading techniques. These challenges are here discussed along with some research directions to follow for achieving sustainable 5G systems.Comment: Accepted by Elsevier Computer Communications, 21 pages, 9 figure