A novel low-swing voltage driver design and the analysis of its robustness to the effects of process variation and external disturbances

arket forces are continually demanding devices with increased functionality/unit area; these demands have been satisfied through aggressive technology scaling which, unfortunately, has impacted adversely on the global interconnect delay subsequently reducing system performance. Line drivers have been used to mitigate the problems with delay; however, these have a large power consumption. A solution to reducing the power dissipation of the drivers is to use lower supply voltages. However, by adopting a lower power supply voltage, the performance of the line drivers for global interconnects is impaired unless low-swing signalling techniques are implemented. Low-swing signalling techniques can provide high speed signalling with low power consumption and hence can be used to drive global on-chip interconnect. Most of the proposed low-swing signalling schemes are immune to noise as they have a good SNR. However, they tend to have a large penalty in area and complexity as they require additional circuitry such as voltage generators and low-Vth devices. Most of the schemes also incorporate multiple Vdd and reference voltages which increase the overall circuit complexity. A diode-connected driver circuit has the best attributes over other low-swing signalling techniques in terms of low power, low delay, good SNR and low area overhead. By incorporating a diode-connected configuration at the output, it can provide high speed signalling due to its high driving capability. However, this configuration also has its limitations as it has issues with its adaptability to process variations, as well as an issue with leakage currents. To address these limitations, two novel driver schemes have been designed, namely, nLVSD and mLVSD, which, additionally, have improvements in performance and power consumption. Comparisons between the proposed schemes with the existing diode-connected driver circuits (MJ and DDC) showed that the nLVSD and mLVSD drivers have approximately 46% and 50% less delay. The name MJ originates from the driver’s designer called Juan A. Montiel-Nelson, while DDC stands for dynamic diode-connected. In terms of power consumption, the nLVSD and mLVSD drivers also produce 43% and 7% improvement. Additionally, the mLVSD driver scheme is the most robust as its SNR is 14 to 44% higher compared to other diode-connected driver circuits. On the other hand, the nLVSD driver has 6% lower SNR compared to the MJ driver, even though it is 19% more robust than the DDC driver. However, since its SNR is still above 1, its improved performance and reduced power consumption, as well other advantages it has over other diode-connected driver circuits can compensate for this limitation. Regarding the robustness to external disturbances, the proposedmdriver circuits are more robust to crosstalk effects as the nLVSD and mLVSD drivers are approximately 35% and 7% more robust than other diode-connected drivers. Furthermore, the mLVSD driver is 5%, 33% and 47% more tolerant to SEUs compared to the nLVSD, MJ and DDC driver circuits respectively, whilst the MJ and DDC drivers are 26% and 40% less tolerant to SEUs iii compared to the nLVSD circuit. A comparison between the four schemes was also undertaken in the presence of ±3σ process and voltage (PV) variations. The analysis indicated that both proposed driver schemes are more robust than other diode-connected driver schemes, namely, the MJ and DDC driver circuits. The MJ driver scheme deviates approximately 18% and 35% more in delay and power consumption compared to the proposed schemes. The DDC driver has approximately 20% and 57% more variations in delay and power consumption in comparison to the proposed schemes. In order to further improve the robustness of the proposed driver circuits against process variation and environmental disturbances, they were further analysed to identify which process variables had the most impact on circuit delay and power consumption, as well as identifying several design techniques to mitigate problems with environmental disturbances. The most significant process parameters to have impact on circuit delay and power consumption were identified to be Vdd, tox, Vth, s, w and t. The impact of SEUs on the circuit can be reduced by increasing the bias currents whilst design methods such as increasing the interconnect spacing can help improve the circuit robustness against crosstalk. Overall it is considered that the proposed nLVSD and mLVSD circuits advance the state of the art in driver design for on-chip signalling applications.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Impact of Bias Temperature Instability on Soft Error Susceptibility

In this paper, we address the issue of analyzing the effects of aging mechanisms on ICs' soft error (SE) susceptibility. In particular, we consider bias temperature instability (BTI), namely negative BTI in pMOS transistors and positive BTI in nMOS transistors that are recognized as the most critical aging mechanisms reducing the reliability of ICs. We show that BTI reduces significantly the critical charge of nodes of combinational circuits during their in-field operation, thus increasing the SE susceptibility of the whole IC. We then propose a time dependent model for SE susceptibility evaluation, enabling the use of adaptive SE hardening approaches, based on the ICs lifetime

Designing energy-efficient sub-threshold logic circuits using equalization and non-volatile memory circuits using memristors

The very large scale integration (VLSI) community has utilized aggressive complementary metal-oxide semiconductor (CMOS) technology scaling to meet the ever-increasing performance requirements of computing systems. However, as we enter the nanoscale regime, the prevalent process variation effects degrade the CMOS device reliability. Hence, it is increasingly essential to explore emerging technologies which are compatible with the conventional CMOS process for designing highly-dense memory/logic circuits. Memristor technology is being explored as a potential candidate in designing non-volatile memory arrays and logic circuits with high density, low latency and small energy consumption. In this thesis, we present the detailed functionality of multi-bit 1-Transistor 1-memRistor (1T1R) cell-based memory arrays. We present the performance and energy models for an individual 1T1R memory cell and the memory array as a whole. We have considered TiO2- and HfOx-based memristors, and for these technologies there is a sub-10% difference between energy and performance computed using our models and HSPICE simulations. Using a performance-driven design approach, the energy-optimized TiO2-based RRAM array consumes the least write energy (4.06 pJ/bit) and read energy (188 fJ/bit) when storing 3 bits/cell for 100 nsec write and 1 nsec read access times. Similarly, HfOx-based RRAM array consumes the least write energy (365 fJ/bit) and read energy (173 fJ/bit) when storing 3 bits/cell for 1 nsec write and 200 nsec read access times. On the logic side, we investigate the use of equalization techniques to improve the energy efficiency of digital sequential logic circuits in sub-threshold regime. We first propose the use of a variable threshold feedback equalizer circuit with combinational logic blocks to mitigate the timing errors in digital logic designed in sub-threshold regime. This mitigation of timing errors can be leveraged to reduce the dominant leakage energy by scaling supply voltage or decreasing the propagation delay. At the fixed supply voltage, we can decrease the propagation delay of the critical path in a combinational logic block using equalizer circuits and, correspondingly decrease the leakage energy consumption. For a 8-bit carry lookahead adder designed in UMC 130 nm process, the operating frequency can be increased by 22.87% (on average), while reducing the leakage energy by 22.6% (on average) in the sub-threshold regime. Overall, the feedback equalization technique provides up to 35.4% lower energy-delay product compared to the conventional non-equalized logic. We also propose a tunable adaptive feedback equalizer circuit that can be used with sequential digital logic to mitigate the process variation effects and reduce the dominant leakage energy component in sub-threshold digital logic circuits. For a 64-bit adder designed in 130 nm our proposed approach can reduce the normalized delay variation of the critical path delay from 16.1% to 11.4% while reducing the energy-delay product by 25.83% at minimum energy supply voltage. In addition, we present detailed energy-performance models of the adaptive feedback equalizer circuit. This work serves as a foundation for the design of robust, energy-efficient digital logic circuits in sub-threshold regime

Analysis and Design of Resilient VLSI Circuits

The reliable operation of Integrated Circuits (ICs) has become increasingly difficult to achieve in the deep sub-micron (DSM) era. With continuously decreasing device feature sizes, combined with lower supply voltages and higher operating frequencies, the noise immunity of VLSI circuits is decreasing alarmingly. Thus, VLSI circuits are becoming more vulnerable to noise effects such as crosstalk, power supply variations and radiation-induced soft errors. Among these noise sources, soft errors (or error caused by radiation particle strikes) have become an increasingly troublesome issue for memory arrays as well as combinational logic circuits. Also, in the DSM era, process variations are increasing at an alarming rate, making it more difficult to design reliable VLSI circuits. Hence, it is important to efficiently design robust VLSI circuits that are resilient to radiation particle strikes and process variations. The work presented in this dissertation presents several analysis and design techniques with the goal of realizing VLSI circuits which are tolerant to radiation particle strikes and process variations. This dissertation consists of two parts. The first part proposes four analysis and two design approaches to address radiation particle strikes. The analysis techniques for the radiation particle strikes include: an approach to analytically determine the pulse width and the pulse shape of a radiation induced voltage glitch in combinational circuits, a technique to model the dynamic stability of SRAMs, and a 3D device-level analysis of the radiation tolerance of voltage scaled circuits. Experimental results demonstrate that the proposed techniques for analyzing radiation particle strikes in combinational circuits and SRAMs are fast and accurate compared to SPICE. Therefore, these analysis approaches can be easily integrated in a VLSI design flow to analyze the radiation tolerance of such circuits, and harden them early in the design flow. From 3D device-level analysis of the radiation tolerance of voltage scaled circuits, several non-intuitive observations are made and correspondingly, a set of guidelines are proposed, which are important to consider to realize radiation hardened circuits. Two circuit level hardening approaches are also presented to harden combinational circuits against a radiation particle strike. These hardening approaches significantly improve the tolerance of combinational circuits against low and very high energy radiation particle strikes respectively, with modest area and delay overheads. The second part of this dissertation addresses process variations. A technique is developed to perform sensitizable statistical timing analysis of a circuit, and thereby improve the accuracy of timing analysis under process variations. Experimental results demonstrate that this technique is able to significantly reduce the pessimism due to two sources of inaccuracy which plague current statistical static timing analysis (SSTA) tools. Two design approaches are also proposed to improve the process variation tolerance of combinational circuits and voltage level shifters (which are used in circuits with multiple interacting power supply domains), respectively. The variation tolerant design approach for combinational circuits significantly improves the resilience of these circuits to random process variations, with a reduction in the worst case delay and low area penalty. The proposed voltage level shifter is faster, requires lower dynamic power and area, has lower leakage currents, and is more tolerant to process variations, compared to the best known previous approach. In summary, this dissertation presents several analysis and design techniques which significantly augment the existing work in the area of resilient VLSI circuit design

Nasics: A `Fabric-Centric\u27 Approach Towards Integrated Nanosystems

This dissertation addresses the fundamental problem of how to build computing systems for the nanoscale. With CMOS reaching fundamental limits, emerging nanomaterials such as semiconductor nanowires, carbon nanotubes, graphene etc. have been proposed as promising alternatives. However, nanoelectronics research has largely focused on a `device-first\u27 mindset without adequately addressing system-level capabilities, challenges for integration and scalable assembly. In this dissertation, we propose to develop an integrated nano-fabric, (broadly defined as nanostructures/devices in conjunction with paradigms for assembly, inter-connection and circuit styles), as opposed to approaches that focus on MOSFET replacement devices as the ultimate goal. In the `fabric-centric\u27 mindset, design choices at individual levels are made compatible with the fabric as a whole and minimize challenges for nanomanufacturing while achieving system-level benefits vs. scaled CMOS. We present semiconductor nanowire based nano-fabrics incorporating these fabric-centric principles called NASICs and N3ASICs and discuss how we have taken them from initial design to experimental prototype. Manufacturing challenges are mitigated through careful design choices at multiple levels of abstraction. Regular fabrics with limited customization mitigate overlay alignment requirements. Cross-nanowire FET devices and interconnect are assembled together as part of the uniform regular fabric without the need for arbitrary fine-grain interconnection at the nanoscale, routing or device sizing. Unconventional circuit styles are devised that are compatible with regular fabric layouts and eliminate the requirement for using complementary devices. Core fabric concepts are introduced and validated. Detailed analyses on device-circuit co-design and optimization, cascading, noise and parameter variation are presented. Benchmarking of nanowire processor designs vs. equivalent scaled 16nm CMOS shows up to 22X area, 30X power benefits at comparable performance, and with overlay precision that is achievable with present-day technology. Building on the extensive manufacturing-friendly fabric framework, we present recent experimental efforts and key milestones that have been attained towards realizing a proof-of-concept prototype at dimensions of 30nm and below

Soft-Error Resilience Framework For Reliable and Energy-Efficient CMOS Logic and Spintronic Memory Architectures

The revolution in chip manufacturing processes spanning five decades has proliferated high performance and energy-efficient nano-electronic devices across all aspects of daily life. In recent years, CMOS technology scaling has realized billions of transistors within large-scale VLSI chips to elevate performance. However, these advancements have also continually augmented the impact of Single-Event Transient (SET) and Single-Event Upset (SEU) occurrences which precipitate a range of Soft-Error (SE) dependability issues. Consequently, soft-error mitigation techniques have become essential to improve systems\u27 reliability. Herein, first, we proposed optimized soft-error resilience designs to improve robustness of sub-micron computing systems. The proposed approaches were developed to deliver energy-efficiency and tolerate double/multiple errors simultaneously while incurring acceptable speed performance degradation compared to the prior work. Secondly, the impact of Process Variation (PV) at the Near-Threshold Voltage (NTV) region on redundancy-based SE-mitigation approaches for High-Performance Computing (HPC) systems was investigated to highlight the approach that can realize favorable attributes, such as reduced critical datapath delay variation and low speed degradation. Finally, recently, spin-based devices have been widely used to design Non-Volatile (NV) elements such as NV latches and flip-flops, which can be leveraged in normally-off computing architectures for Internet-of-Things (IoT) and energy-harvesting-powered applications. Thus, in the last portion of this dissertation, we design and evaluate for soft-error resilience NV-latching circuits that can achieve intriguing features, such as low energy consumption, high computing performance, and superior soft errors tolerance, i.e., concurrently able to tolerate Multiple Node Upset (MNU), to potentially become a mainstream solution for the aerospace and avionic nanoelectronics. Together, these objectives cooperate to increase energy-efficiency and soft errors mitigation resiliency of larger-scale emerging NV latching circuits within iso-energy constraints. In summary, addressing these reliability concerns is paramount to successful deployment of future reliable and energy-efficient CMOS logic and spintronic memory architectures with deeply-scaled devices operating at low-voltages

The effects of process variations on performance and robustness of bulk CMOS and SOI implementations of C-elements

Advances in semiconductor technology have been driven by the continuous demands of market forces for IC products with higher performance and greater functionality per unit area. To date industry has addressed these demands, principally, by scaling down device dimensions. However, several unintended consequences have undermined the benefits obtained from the advances in technology, firstly, the growing impact of process variations on interconnectivity delay, aggravated by the increase in the amount of interconnectivity as circuit complexity increases. Overall, the difficulty of establishing delay parameters in a circuit is adversely impacting on the attainment of the timing closure for a design. Secondly, the increase in the susceptibility of the circuits , even at ground level, to the effects of soft errors due to the reduction in supply voltages and nodal capacitances, together with the increase in the number of nodes in a circuit as the functionality per unit area increases. The aim of this research has been to model and analyse the reliability of logic circuits with regard to the impact of process variations and soft errors, and to finds ways to minimise these effects using different process technologies such as fully depleted silicon on insulator (FDSOI) and partially depleted silicon on insulator (PDSOI) technologies, together with the implementation of different circuit architectures. In view of the increased susceptibility of logic elements to the effects of process variations and soft errors as device geometries are reduced, a logic element which is not only widely used but also typical to asynchronous design is the Muller C-element, which can be realised in a number of different circuit configurations. The robustness of various C-element configurations implemented in different technologies with regard to the effects of process variations and soft errors was examined using the design of the experiment (DoE) and response surface (RSM) techniques. It was found that the circuits based on SOI technology were more robust compared with bulk silicon technology. On the other hand, from the circuit architecture perspective, the differential logic implementations of C-element were found to be more resilient to the effects of process variation and soft errors in comparison with the other C-element implementations investigated.EThOS - Electronic Theses Online ServiceMutah UniversityGBUnited Kingdo

The effects of process variations on performance and robustness of bulk CMOS and SOI implementations of C-elements

Advances in semiconductor technology have been driven by the continuous demands of market forces for IC products with higher performance and greater functionality per unit area. To date industry has addressed these demands, principally, by scaling down device dimensions. However, several unintended consequences have undermined the benefits obtained from the advances in technology, firstly, the growing impact of process variations on interconnectivity delay, aggravated by the increase in the amount of interconnectivity as circuit complexity increases. Overall, the difficulty of establishing delay parameters in a circuit is adversely impacting on the attainment of the timing closure for a design. Secondly, the increase in the susceptibility of the circuits , even at ground level, to the effects of soft errors due to the reduction in supply voltages and nodal capacitances, together with the increase in the number of nodes in a circuit as the functionality per unit area increases. The aim of this research has been to model and analyse the reliability of logic circuits with regard to the impact of process variations and soft errors, and to finds ways to minimise these effects using different process technologies such as fully depleted silicon on insulator (FDSOI) and partially depleted silicon on insulator (PDSOI) technologies, together with the implementation of different circuit architectures. In view of the increased susceptibility of logic elements to the effects of process variations and soft errors as device geometries are reduced, a logic element which is not only widely used but also typical to asynchronous design is the Muller C-element, which can be realised in a number of different circuit configurations. The robustness of various C-element configurations implemented in different technologies with regard to the effects of process variations and soft errors was examined using the design of the experiment (DoE) and response surface (RSM) techniques. It was found that the circuits based on SOI technology were more robust compared with bulk silicon technology. On the other hand, from the circuit architecture perspective, the differential logic implementations of C-element were found to be more resilient to the effects of process variation and soft errors in comparison with the other C-element implementations investigated.EThOS - Electronic Theses Online ServiceMutah UniversityGBUnited Kingdo

High-Performance, Energy-Efficient CMOS Arithmetic Circuits

In a modern microprocessor, datapath/arithmetic circuits have always been an important building block in delivering high-performance, energy-efficient computing, because arithmetic operations such as addition and binary number comparison are two of the most commonly used computing instructions. Besides the manufacturing CMOS process, the two most critical design considerations for arithmetic circuits are the logic style and micro-architecture. In this thesis, a constant-delay (CD) logic style is proposed targeting full-custom high-speed applications. The constant delay characteristic of this logic style (regardless of the logic type) makes it suitable for implementing complicated logic expressions such as addition. CD logic exhibits a unique characteristic where the output is pre-evaluated before the inputs from the preceding stage are ready. This feature enables a performance advantage over static and dynamic domino logic styles in a single cycle, multi-stage circuit block. Several design considerations including timing window width adjustment and clock distribution are discussed. Using a 65-nm general-purpose CMOS technology, the proposed logic style demonstrates an average speedup of 94% and 56% over static and dynamic domino logic, respectively, in five different logic gates. Simulation results of 8-bit ripple carry adders conclude that CD logic is 39% and 23% faster than the static and dynamic-based adders, respectively. CD logic also demonstrates 39% speedup and 64% (22%) energy-delay product reduction from static logic at 100% (10%) data activity in 32-bit carry lookahead adders. To confirm CD logic's potential, a 148 ps, single-cycle 64-bit adder with CD logic implemented in the critical path is fabricated in a 65-nm, 1-V CMOS process. A new 64-bit Ling adder micro-architecture, which utilizes both inversion and absorption properties to minimize the number of CD logic and the number of logic stage in the critical path, is also proposed. At 1-V supply, this adder's measured worst-case power and leakage power are 135 mW and 0.22 mW, respectively. A single-cycle 64-bit binary comparator utilizing a radix-2 tree structure is also proposed. This comparator architecture is specifically designed for static logic to achieve both low-power and high-performance operation, especially in low input data activity environments. At 65-nm technology with 25% (10%) data activity, the proposed design demonstrates 2.3x (3.5x) and 3.7x (5.8x) power and energy-delay product efficiency, respectively. This comparator is also 2.7x faster at iso-energy (80 fJ) or 3.3x more energy-efficient at iso-delay (200 ps) than existing designs. An improved comparator, where CD logic is utilized in the critical path to achieve high performance without sacrificing the overall energy efficiency, is also realized in a 65-nm 1-V CMOS process. At 1-V supply, the proposed comparator's measured delay is 167 ps, and has an average power and a leakage power of 2.34 mW and 0.06 mW, respectively. At 0.3-pJ iso-energy or 250-ps iso-delay budget, the proposed comparator with CD logic is 20% faster or 17% more energy-efficient compared to a comparator implemented with just the static logic