2,221 research outputs found
Pipelined Two-Operand Modular Adders
Pipelined two-operand modular adder (TOMA) is one of basic components used in digital signal processing (DSP) systems that use the residue number system (RNS). Such modular adders are used in binary/residue and residue/binary converters, residue multipliers and scalers as well as within residue processing channels. The design of pipelined TOMAs is usually obtained by inserting an appriopriate number of latch layers inside a nonpipelined TOMA structure. Hence their area is also determined by the number of latches and the delay by the number of latch layers. In this paper we propose a new pipelined TOMA that is based on a new TOMA, that has the smaller area and smaller delay than other known structures. Comparisons are made using data from the very large scale of integration (VLSI) standard cell library
Generating and Searching Families of FFT Algorithms
A fundamental question of longstanding theoretical interest is to prove the
lowest exact count of real additions and multiplications required to compute a
power-of-two discrete Fourier transform (DFT). For 35 years the split-radix
algorithm held the record by requiring just 4n log n - 6n + 8 arithmetic
operations on real numbers for a size-n DFT, and was widely believed to be the
best possible. Recent work by Van Buskirk et al. demonstrated improvements to
the split-radix operation count by using multiplier coefficients or "twiddle
factors" that are not n-th roots of unity for a size-n DFT. This paper presents
a Boolean Satisfiability-based proof of the lowest operation count for certain
classes of DFT algorithms. First, we present a novel way to choose new yet
valid twiddle factors for the nodes in flowgraphs generated by common
power-of-two fast Fourier transform algorithms, FFTs. With this new technique,
we can generate a large family of FFTs realizable by a fixed flowgraph. This
solution space of FFTs is cast as a Boolean Satisfiability problem, and a
modern Satisfiability Modulo Theory solver is applied to search for FFTs
requiring the fewest arithmetic operations. Surprisingly, we find that there
are FFTs requiring fewer operations than the split-radix even when all twiddle
factors are n-th roots of unity.Comment: Preprint submitted on March 28, 2011, to the Journal on
Satisfiability, Boolean Modeling and Computatio
Calculation Methodology for Flexible Arithmetic Processing
Paper submitted to the IFIP International Conference on Very Large Scale Integration (VLSI-SOC), Darmstadt, Germany, 2003.A new operation model of flexible calculation that allows us to adjust the operation delay depending on the available time is presented. The operation method design uses look-up tables and progressive construction of the result. The increase in the operators’ granularity opens up new possibilities in calculation methods and microprocessor design. This methodology, together with the advances in technology, enables the functions of an arithmetic unit to be implemented on the basis of techniques based on stored data that provide quality results and systematization in the implementation. The proposed techniques are applied in the design of a multiplier operator. We report an evaluation of the architecture in area, delay and computation error, as well as a suitable implementation of an application example in FPGA to validate the design.This work is being backed by grant DPI2002-04434-C04-01 from the Ministerio de Ciencia y TecnologĂa of the Spanish Government
HIGH-SPEED CO-PROCESSORS BASED ON REDUNDANT NUMBER SYSTEMS
There is a growing demand for high-speed arithmetic co-processors for use in applications with computationally intensive tasks. For instance, Fast Fourier Transform (FFT) co-processors are used in real-time multimedia services and financial applications use decimal co-processors to perform large amounts of decimal computations.
Using redundant number systems to eliminate word-wide carry propagation within interim operations is a well-known technique to increase the speed of arithmetic hardware units. Redundant number systems are mostly useful in applications where many consecutive arithmetic operations are performed prior to the final result, making it advantageous for arithmetic co-processors. This thesis discusses the implementation of two popular arithmetic co-processors based on redundant number systems: namely, the binary FFT co-processor and the decimal arithmetic co-processor.
FFT co-processors consist of several consecutive multipliers and adders over complex numbers. FFT architectures are implemented based on fixed-point and floating-point arithmetic. The main advantage of floating-point over fixed-point arithmetic is the wide dynamic range it introduces. Moreover, it avoids numerical issues such as scaling and overflow/underflow concerns at the expense of higher cost. Furthermore, floating-point implementation allows for an FFT co-processor to collaborate with general purpose processors. This offloads computationally intensive tasks from the primary processor.
The first part of this thesis, which is devoted to FFT co-processors, proposes a new FFT architecture that uses a new Binary-Signed Digit (BSD) carry-limited adder, a new floating-point BSD multiplier and a new floating-point BSD three-operand adder. Finally, a new unit labeled as Fused-Dot-Product-Add (FDPA) is designed to compute AB+CD+E over floating-point BSD operands.
The second part of the thesis discusses decimal arithmetic operations implemented in hardware using redundant number systems. These operations are popularly used in decimal floating-point co-processors. A new signed-digit decimal adder is proposed along with a sequential decimal multiplier that uses redundant number systems to increase the operational frequency of the multiplier. New redundant decimal division and square-root units are also proposed.
The architectures proposed in this thesis were all implemented using Hardware-Description-Language (Verilog) and synthesized using Synopsys Design Compiler. The evaluation results prove the speed improvement of the new arithmetic units over previous pertinent works. Consequently, the FFT and decimal co-processors designed in this thesis work with at least 10% higher speed than that of previous works. These architectures are meant to fulfill the demand for the high-speed co-processors required in various applications such as multimedia services and financial computations
Recommended from our members
Accelerating RSA Public Key Cryptography via Hardware Acceleration
A large number and a variety of sensors and actuators, also known as edge devices of the Internet of Things, belonging to various industries - health care monitoring, home automation, industrial automation, have become prevalent in today\u27s world. These edge devices need to communicate data collected to the central system occasionally and often in burst mode which is then used for monitoring and control purposes. To ensure secure connections, Asymmetric or Public Key Cryptography (PKC) schemes are used in combination with Symmetric Cryptography schemes. RSA (Rivest - Shamir- Adleman) is one of the most prevalent public key cryptosystems, and has computationally intensive operations which might have a high latency when implemented in resource constrained environments. The objective of this thesis is to design an accelerator capable of increasing the speed of execution of the RSA algorithm in such resource constrained environments. The bottleneck of the algorithm is determined by analyzing the performance of the algorithm in various platforms - Intel Linux Machine, Raspberry Pi, Nios soft core processor. In designing the accelerator to speedup bottleneck function, we realize that the accelerator architecture will need to be changed according to the resources available to the accelerator. We use high level synthesis tools to explore the design space of the accelerator by taking into consideration system level aspects like the number of ports available to transfer inputs to the accelerator, the word size of the processor, etc. We also propose a new accelerator architecture for the bottleneck function and the algorithm it implements and compare the area and latency requirements of it with other designs obtained from design space exploration. The functionality of the design proposed is verified and prototyped in Zynq SoC of Xilinx Zedboard
- …