116 research outputs found

    [[alternative]]Scene Analysis and Intelligent Control Strategy Design for the Robot Soccer(III)

    Get PDF
    計畫編號:NSC91-2213-E032-002研究期間:200208~200307研究經費:410,000[[sponsorship]]行政院國家科學委員

    Trajectory tracking control based on adaptive neural dynamics for four-wheel drive omnidirectional mobile robots

    Get PDF
    There is usually the speed jump problem existing in conventional back-stepping tracking control for four-wheel drive omni-directional mobile robots, a trajectory tracking controller based on adaptive neural dynamics model is proposed. Because of the smoothness and boundedness of the output from the neural dynamics model, it produces a gradually varying tracking speed instead of the jumping speed, and the parameters are designed to avoid the control values exceeding their limits. And then, a parameter adaptive controller is presented to improve control performance. Simulation results of different paths and comparison with the conventional back-stepping technique show that the approach is effective, and the system has a good performance with smooth output

    Trajectory tracking control based on adaptive neural dynamics for four-wheel drive omnidirectional mobile robots

    Get PDF
    There is usually the speed jump problem existing in conventional back-stepping tracking control for four-wheel drive omni-directional mobile robots, a trajectory tracking controller based on adaptive neural dynamics model is proposed. Because of the smoothness and boundedness of the output from the neural dynamics model, it produces a gradually varying tracking speed instead of the jumping speed, and the parameters are designed to avoid the control values exceeding their limits. And then, a parameter adaptive controller is presented to improve control performance. Simulation results of different paths and comparison with the conventional back-stepping technique show that the approach is effective, and the system has a good performance with smooth output

    Mobile Robots Navigation

    Get PDF
    Mobile robots navigation includes different interrelated activities: (i) perception, as obtaining and interpreting sensory information; (ii) exploration, as the strategy that guides the robot to select the next direction to go; (iii) mapping, involving the construction of a spatial representation by using the sensory information perceived; (iv) localization, as the strategy to estimate the robot position within the spatial map; (v) path planning, as the strategy to find a path towards a goal location being optimal or not; and (vi) path execution, where motor actions are determined and adapted to environmental changes. The book addresses those activities by integrating results from the research work of several authors all over the world. Research cases are documented in 32 chapters organized within 7 categories next described

    Controling of Mobile Agents using Intelligent Strategy

    Get PDF
    Robots are developed to carry out certain task to help the human beings. A robot carrying out a particular needed task has promising applications for the betterment of human society. So the control of their motion remains a vital part for a robot. In this project, I have to develop the simulation of mobile agents (robots) in an arena of obstacles from a start point to a destination point without collision. So in a way this project deals with successful navigation of robots in prior known environment. This document presents a computer vision method and related algorithms for the navigation of a robot in a static environment. Our environment is a simple white coloured area with coloured obstacles (circle with white colour, rectangles with orange colour, triangle with green colour and hexagon with pink colour which helps in identifying the obstacle) and robot is in a rectangular form. The agents starting point is in blue colour and the destination point is in red colour. This environment is input by the user with the starting point and the destination point. The data acquired from here is then used as an input for the program which controls the robot drive motion in graphic control window. Robot then tries to reach its destination avoiding obstacles in its path. The algorithm presented in this paper uses the distance transform methodology to generate paths for the robot to execute which are written in C++ compiler. These paper developments can also be applied to vehicles for collision free driving

    Adaptive Polar-Space Motion Control for Embedded Omnidirectional Mobile Robots with Parameter Variations and Uncertainties

    Get PDF
    This paper presents an adaptive polar-space motion controller for trajectory tracking and stabilization of a three-wheeled, embedded omnidirectional mobile robot with parameter variations and uncertainties caused by friction, slip and payloads. With the derived dynamic model in polar coordinates, an adaptive motion controller is synthesized via the adaptive backstepping approach. This proposed polar-space robust adaptive motion controller was implemented into an embedded processor using a field-programmable gate array (FPGA) chip. Furthermore, the embedded adaptive motion controller works with a reusable user IP (Intellectual Property) core library and an embedded real-time operating system (RTOS) in the same chip to steer the mobile robot to track the desired trajectory by using hardware/software co-design technique and SoPC (system-on-a-programmable-chip) technology. Simulation results are conducted to show the merit of the proposed polar-space control method in comparison with a conventional proportional-integral (PI) feedback controller and a non-adaptive polar-space kinematic controller. Finally, the effectiveness and performance of the proposed embedded adaptive motion controller are exemplified by conducting several experiments on steering an embedded omnidirectional mobile robot

    Vision Sensors and Edge Detection

    Get PDF
    Vision Sensors and Edge Detection book reflects a selection of recent developments within the area of vision sensors and edge detection. There are two sections in this book. The first section presents vision sensors with applications to panoramic vision sensors, wireless vision sensors, and automated vision sensor inspection, and the second one shows image processing techniques, such as, image measurements, image transformations, filtering, and parallel computing

    Design and modeling of a stair climber smart mobile robot (MSRox)

    Full text link

    Optimal PID Controller Design for AVR System

    Get PDF
    99學年度翁慶昌研究獎補助論文[[abstract]]In this paper, a real-valued genetic algorithm (RGA) and a particle swarm optimization (PSO) algorithm with a new fitness function method are proposed to design a PID controller for the Automatic Voltage Regulator (AVR) system. The proposed fitness function can let the RGA and PSO algorithm search a high-quality solution effectively and improve the transient response of the controlled system. The proposed algorithms are applied in the PID controller design for the AVR system. Some simulation and comparison results are presented.We can see that the proposed RGA and PSO algorithm with this new fitness function can find a PID control parameter set effectively so that the controlled AVR system has a better control performance.[[notice]]補正完畢[[incitationindex]]EI[[booktype]]紙

    The Future of the Operating Room: Surgical Preplanning and Navigation using High Accuracy Ultra-Wideband Positioning and Advanced Bone Measurement

    Get PDF
    This dissertation embodies the diversity and creativity of my research, of which much has been peer-reviewed, published in archival quality journals, and presented nationally and internationally. Portions of the work described herein have been published in the fields of image processing, forensic anthropology, physical anthropology, biomedical engineering, clinical orthopedics, and microwave engineering. The problem studied is primarily that of developing the tools and technologies for a next-generation surgical navigation system. The discussion focuses on the underlying technologies of a novel microwave positioning subsystem and a bone analysis subsystem. The methodologies behind each of these technologies are presented in the context of the overall system with the salient results helping to elucidate the difficult facets of the problem. The microwave positioning system is currently the highest accuracy wireless ultra-wideband positioning system that can be found in the literature. The challenges in producing a system with these capabilities are many, and the research and development in solving these problems should further the art of high accuracy pulse-based positioning
    corecore