39 research outputs found
Parametric Spiral And Its Application As Transition Curve
Lengkung Bezier merupakan suatu perwakilan lengkungan yang paling popular digunakan di dalam applikasi Rekabentuk Berbantukan Komputer (RBK) dan Rekabentuk Geometrik Berbantukan Komputer (RGBK).
The Bezier curve representation is frequently utilized in computer-aided design (CAD) and computer-aided geometric design (CAGD) applications. The curve is defined geometrically, which means that the parameters have geometric meaning; they are just points in three-dimensional space
A sharp interface isogeometric strategy for moving boundary problems
The proposed methodology is first utilized to model stationary and propagating cracks. The crack face is enriched with the Heaviside function which captures the displacement discontinuity. Meanwhile, the crack tips are enriched with asymptotic displacement functions to reproduce the tip singularity. The enriching degrees of freedom associated with the crack tips are chosen as stress intensity factors (SIFs) such that these quantities can be directly extracted from the solution without a-posteriori integral calculation.
As a second application, the Stefan problem is modeled with a hybrid function/derivative enriched interface. Since the interface geometry is explicitly defined, normals and curvatures can be analytically obtained at any point on the interface, allowing for complex boundary conditions dependent on curvature or normal to be naturally imposed. Thus, the enriched approximation naturally captures the interfacial discontinuity in temperature gradient and enables the imposition of Gibbs-Thomson condition during solidification simulation.
The shape optimization through configuration of finite-sized heterogeneities is lastly studied. The optimization relies on the recently derived configurational derivative that describes the sensitivity of an arbitrary objective with respect to arbitrary design modifications of a heterogeneity inserted into a domain. The THB-splines, which serve as the underlying approximation, produce sufficiently smooth solution near the boundaries of the heterogeneity for accurate calculation of the configurational derivatives. (Abstract shortened by ProQuest.
Toolpath Smoothing using Clothoids for High Speed CNC Machines
As a result of this research, new methods for CNC toolpath smoothing were developed. Utilising these methods can increase the speed, decrease vibrations and improve the cut quality of a CNC machine. In the developed techniques, Euler spirals have been used to smooth the corners
Developable B-spline surface generation from control rulings
An intuitive design method is proposed for generating developable ruled
B-spline surfaces from a sequence of straight line segments indicating the
surface shape. The first and last line segments are enforced to be the head and
tail ruling lines of the resulting surface while the interior lines are
required to approximate rulings on the resulting surface as much as possible.
This manner of developable surface design is conceptually similar to the
popular way of the freeform curve and surface design in the CAD community,
observing that a developable ruled surface is a single parameter family of
straight lines. This new design mode of the developable surface also provides
more flexibility than the widely employed way of developable surface design
from two boundary curves of the surface. The problem is treated by numerical
optimization methods with which a particular level of distance error is
allowed. We thus provide an effective tool for creating surfaces with a high
degree of developability when the input control rulings do not lie in exact
developable surfaces. We consider this ability as the superiority over
analytical methods in that it can deal with arbitrary design inputs and find
practically useful results.Comment: 13 pages, 12 figrue
Recommended from our members
Smooth Trajectory Generation for Machine Tools and Industrial Robots
This thesis presents accurate and time-optimal smooth reference trajectory generation techniques for manufacturing equipment such as high-speed machine tools (MT) and industrial robots (IR). Typical machining tool-paths for MTs and IRs are defined as a series of discrete linear moves. Although Point-to-Point (P2P) feed motion can be generated by interpolating each linear segment with high-order velocity profiles, the continuous and accurate transition between consecutive segments is necessary to realize a non-stop contouring motion for efficient manufacturing. To generate continuous feed motion along sharp cornered tool-paths, most numerical control (NC) systems blend (smooth) corners locally using various curves and splines. The feed (speed) is reduced around the blend sections so that the motion system’s kinematic limits are respected. This thesis proposes 2 novel techniques to enable modern MT and IR to generate non-stop rapid motion along discrete tool-paths. Firstly, a Kinematic Corner Smoothing (KCS) technique has been proposed to generate time-optimal (minimum time) motion trajectories in a real-time within axis kinematic limits. A novel real-time interpolation technique based on Finite Impulse Response (FIR) filtering has also been proposed to suppress residual vibrations for high positioning accuracy of machine tools and motion systems as well. These two techniques are tailored for Cartesian structured motion systems such as 2-3 axis machine tools. Finally, a decoupled FIR filtering technique has been developed to synchronously interpolate tool position and orientation for accurate motion generation for 5-axis MTs and IRs. These techniques are computationally lightweight and suitable for real-time implementation on modern NC systems. Simulation and experimental validation on Cartesian and 5-axis machine tools are presented to validate the effectiveness of the developed algorithms to interpolate along with discrete commands for high-speed and high-accuracy motion
Designing aesthetically pleasing freeform surfaces in a computer environment
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Architecture, February 2001.Includes bibliographical references (p. 151-160).Statement: If computational tools are to be employed in the aesthetic design of freeform surfaces, these tools must better reflect the ways in which creative designers conceive of and develop such shapes. In this thesis, I studied the design of aesthetically constrained freeform surfaces in architecture and industrial design, formulated a requirements list for a computational system that would aid in the creative design of such surfaces, and implemented a subset of the tools that would comprise such a system. This work documents the clay modeling process at BMW AG., Munich. The study of that process has led to a list of tools that would make freeform surface modeling possible in a computer environment. And finally, three tools from this system specification have been developed into a proof-of-concept system. Two of these tools are sweep modification tools and the third allows a user to modify a surface by sketching a shading pattern desired for the surface. The proof-of-concept tools were necessary in order to test the validity of the tools being presented and they have been used to create a number of example objects. The underlying surface representation is a variational expression which is minimized using the finite element method over an irregular triangulated mesh.by Evan P. Smyth.Ph.D