4,498 research outputs found
Recommended from our members
Mobile Audiovisual Terminal: System Design and Subjective Testing in DECT and UMTS networks
It is anticipated that there will shortly be a requirement
for multimedia terminals that operate via mobile
communications systems. This paper presents a functional specification
for such a terminal operating at 32 kb/s in a digital
European cordless telecommunications (DECT) and universal
mobile telecommunications system (UMTS) radio network. A terminal
has been built, based on a PC with digital signal processor
(DSP) boards for audio and video coding and decoding. Speech
coding is by a phonetically driven code-excited linear prediction
(CELP) speech coder and video coding by a block-oriented hybrid
discrete cosine transform (DCT) coder. Separate channel coding
is provided for the audio and video data. The paper describes the
techniques used for audio and video coding, channel coding, and
synchronization. Methods of subjective testing in a DECT network
and in a UMTS network are also described. These consisted of
subjective tests of first impressions of the mobile audio–visual
terminal (MAVT) quality, interactive tests, and the completion
of an exit questionnaire. The test results showed that the quality
of the audio was sufficiently good for comprehension and the
video was sufficiently good for following and repeating simple
mechanical tasks. However, the quality of the MAVT was not
good enough for general use where high-quality audio and video
was needed, especially when transmission was in a noisy radio
environment
Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals
Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve
Performance Analysis of PCFICH and PDCCH LTE Control Channels
Control channels play a key role in the evaluation of mobile system performance. The purpose of our paper is to evaluate the performance of the control channels implementation in the Long Term Evolution (LTE) system. The paper deals with the simulation of the complete signal processing chain for Physical Control Format Indicator Channel (PCFICH) and Physical Downlink Control Channel (PDCCH) in the LTE system, Release 8. We implemented a complete signal processing chain for downlink control channels as an extension of the existing MATLAB LTE downlink simulator. The paper presents results of PCFICH and PDCCH control channel computer performance analysis in various channel conditions. The results can be compared with the performance of data channels
On Complexity, Energy- and Implementation-Efficiency of Channel Decoders
Future wireless communication systems require efficient and flexible baseband
receivers. Meaningful efficiency metrics are key for design space exploration
to quantify the algorithmic and the implementation complexity of a receiver.
Most of the current established efficiency metrics are based on counting
operations, thus neglecting important issues like data and storage complexity.
In this paper we introduce suitable energy and area efficiency metrics which
resolve the afore-mentioned disadvantages. These are decoded information bit
per energy and throughput per area unit. Efficiency metrics are assessed by
various implementations of turbo decoders, LDPC decoders and convolutional
decoders. New exploration methodologies are presented, which permit an
appropriate benchmarking of implementation efficiency, communications
performance, and flexibility trade-offs. These exploration methodologies are
based on efficiency trajectories rather than a single snapshot metric as done
in state-of-the-art approaches.Comment: Submitted to IEEE Transactions on Communication
Burst-by-Burst Adaptive Decision Feedback Equalised TCM, TTCM and BICM for H.263-Assisted Wireless Video Telephony
Decision Feedback Equaliser (DFE) aided wideband Burst-by-Burst (BbB) Adaptive Trellis Coded Modulation (TCM), Turbo Trellis Coded Modulation (TTCM) and Bit-Interleaved Coded Modulation (BICM) assisted H.263-based video transceivers are proposed and characterised in performance terms when communicating over the COST 207 Typical Urban wideband fading channel. Specifically, four different modulation modes, namely 4QAM, 8PSK, 16QAM and 64QAM are invoked and protected by the above-mentioned coded modulation schemes. The TTCM assisted scheme was found to provide the best video performance, although at the cost of the highest complexity. A range of lower-complexity arrangements will also be characterised. Finally, in order to confirm these findings in an important practical environment, we have also investigated the adaptive TTCM scheme in the CDMA-based Universal Mobile Telecommunications System's (UMTS) Terrestrial Radio Access (UTRA) scenario and the good performance of adaptive TTCM scheme recorded when communicating over the COST 207 channels was retained in the UTRA environment
Signal detection for orthogonal space-time block coding over time-selective fading channels: A PIC approach for the G(i) systems
One major assumption in all orthogonal space-time block coding (O-STBC) schemes is that the channel remains static over the entire length of the codeword. However, time selective fading channels do exist, and in such case the conventional O-STBC detectors can suffer from a large error floor in the high signal-to-noise ratio (SNR) cases. This paper addresses such an issue by introducing a parallel interference cancellation (PIC) based detector for the G(i) coded systems (i = 3 and 4)
Service Platform for Converged Interactive Broadband Broadcast and Cellular Wireless
A converged broadcast and telecommunication
service platform is presented that is able to create, deliver, and
manage interactive, multimedia content and services for consumption
on three different terminal types. The motivations of
service providers for designing converged interactive multimedia
services, which are crafted for their individual requirements, are
investigated. The overall design of the system is presented with
particular emphasis placed on the operational features of each
of the sub-systems, the flows of media and metadata through the
sub-systems and the formats and protocols required for inter-communication
between them. The key features of tools required for
creating converged interactive multimedia content for a range of
different end-user terminal types are examined. Finally possible
enhancements to this system are discussed. This study is of particular
interest to those organizations currently conducting trials
and commercial launches of DVB-H services because it provides
them with an insight of the various additional functions required
in the service provisioning platforms to provide fully interactive
services to a range of different mobile terminal types
- …