Functional observers design for nonlinear discrete-time systems with interval time-varying delays

summary:This paper is concerned with the functional observer design for a class of Multi-Input Multi-Output discrete-time systems with mixed time-varying delays. Firstly, using the Lyapunov-Krasovskii functional approach, we design the parameters of the delay-dependent observer. We establish the sufficient conditions to guarantee the exponential stability of functional observer error system. In addition, for design purposes, delay-dependent sufficient conditions are proposed in terms of matrix inequalities to guarantee that the functional observer error system is exponentially stable. Secondly, we presented the sufficient conditions of the existence of internal-delay independent functional observer to ensure the estimated error system is asymptotically stable. Furthermore, some sufficient conditions are obtained to guarantee that the internal-delay independent functional observer error system is exponentially stable. Finally, simulation examples are provided to demonstrate the effectiveness of the proposed method

generalized multiple delay-dependent H∞, functional observer design for nonlinear system

Producción CientíficaFunctional observers are the major alternative to many practical estimation problems where full-order observers cannot be used. This paper introduces a generalized approach to design H∞ functional observers for a class of Lipschitz nonlinear systems with multiple time delays. Moreover, the considered system extends from previously published work in that it presents nonlinearity, multiple delay and external disturbance. Their main findings come from the development of a generalized augmented Lyapunov function that uses both the extended reciprocal convex combination and the Wirtinger inequality. The stability of the observer is therefore guaranteed by an LMI optimization problem. Finally, the steps of the design procedure were condensed and proffered for the two numerical examples to test the recommended design approach

Anomaly Detection in Test Equipment via Sliding Mode Observers

Nonlinear observers were originally developed based on the ideas of variable structure control, and for the purpose of detecting disturbances in complex systems. In this anomaly detection application, these observers were designed for estimating the distributed state of fluid flow in a pipe described by a class of advection equations. The observer algorithm uses collected data in a piping system to estimate the distributed system state (pressure and velocity along a pipe containing liquid gas propellant flow) using only boundary measurements. These estimates are then used to further estimate and localize possible anomalies such as leaks or foreign objects, and instrumentation metering problems such as incorrect flow meter orifice plate size. The observer algorithm has the following parts: a mathematical model of the fluid flow, observer control algorithm, and an anomaly identification algorithm. The main functional operation of the algorithm is in creating the sliding mode in the observer system implemented as software. Once the sliding mode starts in the system, the equivalent value of the discontinuous function in sliding mode can be obtained by filtering out the high-frequency chattering component. In control theory, "observers" are dynamic algorithms for the online estimation of the current state of a dynamic system by measurements of an output of the system. Classical linear observers can provide optimal estimates of a system state in case of uncertainty modeled by white noise. For nonlinear cases, the theory of nonlinear observers has been developed and its success is mainly due to the sliding mode approach. Using the mathematical theory of variable structure systems with sliding modes, the observer algorithm is designed in such a way that it steers the output of the model to the output of the system obtained via a variety of sensors, in spite of possible mismatches between the assumed model and actual system. The unique properties of sliding mode control allow not only control of the model internal states to the states of the real-life system, but also identification of the disturbance or anomaly that may occur

H ∞ sliding mode observer design for a class of nonlinear discrete time-delay systems: A delay-fractioning approach

Copyright @ 2012 John Wiley & SonsIn this paper, the H ∞  sliding mode observer (SMO) design problem is investigated for a class of nonlinear discrete time-delay systems. The nonlinear descriptions quantify the maximum possible derivations from a linear model, and the system states are allowed to be immeasurable. Attention is focused on the design of a discrete-time SMO such that the asymptotic stability as well as the H ∞  performance requirement of the error dynamics can be guaranteed in the presence of nonlinearities, time delay and external disturbances. Firstly, a discrete-time discontinuous switched term is proposed to make sure that the reaching condition holds. Then, by constructing a new Lyapunov–Krasovskii functional based on the idea of ‘delay fractioning’ and by introducing some appropriate free-weighting matrices, a sufficient condition is established to guarantee the desired performance of the error dynamics in the specified sliding mode surface by solving a minimization problem. Finally, an illustrative example is given to show the effectiveness of the designed SMO design scheme

An energy-based state observer for dynamical subsystems with inaccessible state variables

This work presents an energy-based state estimation formalism for a class of dynamical systems with inaccessible/ unknown outputs, and systems at which sensor utilization is impractical, or when measurements can not be taken. The power-conserving physical interconnections among most of the dynamical subsystems allow for power exchange through their power ports. Power exchange is conceptually considered as information exchange among the dynamical subsystems and further utilized to develop a natural feedback-like information from a class of dynamical systems with inaccessible/unknown outputs. This information is used in the design of an energybased state observer. Convergence stability of the estimation error for the proposed state observer is proved for systems with linear dynamics. Furthermore, robustness of the convergence stability is analyzed over a range of parameter deviation and model uncertainties. Experiments are conducted on a dynamical system with a single input and multiple inaccessible outputs (Fig. 1) to demonstrate the validity of the proposed energybased state estimation formalism

Directly Coupled Observers for Quantum Harmonic Oscillators with Discounted Mean Square Cost Functionals and Penalized Back-action

This paper is concerned with quantum harmonic oscillators consisting of a quantum plant and a directly coupled coherent quantum observer. We employ discounted quadratic performance criteria in the form of exponentially weighted time averages of second-order moments of the system variables. A coherent quantum filtering (CQF) problem is formulated as the minimization of the discounted mean square of an estimation error, with which the dynamic variables of the observer approximate those of the plant. The cost functional also involves a quadratic penalty on the plant-observer coupling matrix in order to mitigate the back-action of the observer on the covariance dynamics of the plant. For the discounted mean square optimal CQF problem with penalized back-action, we establish first-order necessary conditions of optimality in the form of algebraic matrix equations. By using the Hamiltonian structure of the Heisenberg dynamics and related Lie-algebraic techniques, we represent this set of equations in a more explicit form in the case of equally dimensioned plant and observer.Comment: 11 pages, a brief version to be submitted to the IEEE 2016 Conference on Norbert Wiener in the 21st Century, 13-15 July, Melbourne, Australi

On output feedback nonlinear model predictive control using high gain observers for a class of systems

In recent years, nonlinear model predictive control schemes have been derived that guarantee stability of the closed loop under the assumption of full state information. However, only limited advances have been made with respect to output feedback in connection to nonlinear predictive control. Most of the existing approaches for output feedback nonlinear model predictive control do only guarantee local stability. Here we consider the combination of stabilizing instantaneous NMPC schemes with high gain observers. For a special MIMO system class we show that the closed loop is asymptotically stable, and that the output feedback NMPC scheme recovers the performance of the state feedback in the sense that the region of attraction and the trajectories of the state feedback scheme are recovered for a high gain observer with large enough gain and thus leading to semi-global/non-local results

An Energy-Based State Observer for Dynamical Subsystems with Inaccessible State Variables

This work presents an energy-based state estimation formalism for a class of dynamical systems with inaccessible/ unknown outputs, and systems at which sensor utilization is impractical, or when measurements can not be taken. The power-conserving physical interconnections among most of the dynamical subsystems allow for power exchange through their power ports. Power exchange is conceptually considered as information exchange among the dynamical subsystems and further utilized to develop a natural feedback-like information from a class of dynamical systems with inaccessible/unknown outputs. This information is used in the design of an energybased state observer. Convergence stability of the estimation error for the proposed state observer is proved for systems with linear dynamics. Furthermore, robustness of the convergence stability is analyzed over a range of parameter deviation and model uncertainties. Experiments are conducted on a dynamical system with a single input and multiple inaccessible outputs (Fig. 1) to demonstrate the validity of the proposed energybased state estimation formalism