Time-optimal Control Strategies for Electric Race Cars with Different Transmission Technologies

This paper presents models and optimization methods to rapidly compute the achievable lap time of a race car equipped with a battery electric powertrain. Specifically, we first derive a quasi-convex model of the electric powertrain, including the battery, the electric machine, and two transmission technologies: a single-speed fixed gear and a continuously variable transmission (CVT). Second, assuming an expert driver, we formulate the time-optimal control problem for a given driving path and solve it using an iterative convex optimization algorithm. Finally, we showcase our framework by comparing the performance achievable with a single-speed transmission and a CVT on the Le Mans track. Our results show that a CVT can balance its lower efficiency and higher weight with a higher-efficiency and more aggressive motor operation, and significantly outperform a fixed single-gear transmission.Comment: 5 pages, 4 figures, submitted to the 2020 IEEE Vehicle Power and Propulsion Conferenc

Power Management of a Plug-in Hybrid Electric Vehicle Based on Cycle Energy Estimation

2012 Workshop on Engine and Powertrain Control,Simulation and ModelingThe International Federation of Automatic ControlRueil-Malmaison, France, October 23-25, 2012Plug-in Hybrid Electric Vehicles (PHEV) are being investigated in many research and development programs motivated by the urgent need for more fuel-efficient vehicles that produce fewer harmful emissions. There are many potential advantages of hybridization such as the improvement of transient power demand, the ability of regenerative braking and the opportunities for optimization of the vehicle efficiency. The coordination among the various power sources requires a high level of control in the vehicle. In order to solve the power management problem, the controller proposed in this work is divided into two levels: the upper one calculates the power that must be supplied by the engine at each moment taking into account the estimation of the energy that must be supplied by the powertrain until the end of the journey. The lower one manages the torque/speed set points for all the devices. Besides, the operation modes are changed according to some heuristic rules. Several simulation results are presented, showing that the proposed control strategy can provide good performance with low computational load

Urban and extra-urban hybrid vehicles: a technological review

Pollution derived from transportation systems is a worldwide, timelier issue than ever. The abatement actions of harmful substances in the air are on the agenda and they are necessary today to safeguard our welfare and that of the planet. Environmental pollution in large cities is approximately 20% due to the transportation system. In addition, private traffic contributes greatly to city pollution. Further, “vehicle operating life” is most often exceeded and vehicle emissions do not comply with European antipollution standards. It becomes mandatory to find a solution that respects the environment and, realize an appropriate transportation service to the customers. New technologies related to hybrid –electric engines are making great strides in reducing emissions, and the funds allocated by public authorities should be addressed. In addition, the use (implementation) of new technologies is also convenient from an economic point of view. In fact, by implementing the use of hybrid vehicles, fuel consumption can be reduced. The different hybrid configurations presented refer to such a series architecture, developed by the researchers and Research and Development groups. Regarding energy flows, different strategy logic or vehicle management units have been illustrated. Various configurations and vehicles were studied by simulating different driving cycles, both European approval and homologation and customer ones (typically municipal and university). The simulations have provided guidance on the optimal proposed configuration and information on the component to be used

Multi-objective optimisation for battery electric vehicle powertrain topologies

Electric vehicles are becoming more popular in the market. To be competitive, manufacturers need to produce vehicles with a low energy consumption, a good range and an acceptable driving performance. These are dependent on the choice of components and the topology in which they are used. In a conventional gasoline vehicle, the powertrain topology is constrained to a few well-understood layouts; these typically consist of a single engine driving one axle or both axles through a multi-ratio gearbox. With electric vehicles, there is more flexibility, and the design space is relatively unexplored. In this paper, we evaluate several different topologies as follows: a traditional topology using a single electric motor driving a single axle with a fixed gear ratio; a topology using separate motors for the front axle and the rear axle, each with its own fixed gear ratio; a topology using in-wheel motors on a single axle; a four-wheel-drive topology using in-wheel motors on both axes. Multi-objective optimisation techniques are used to find the optimal component sizing for a given requirement set and to investigate the trade-offs between the energy consumption, the powertrain cost and the acceleration performance. The paper concludes with a discussion of the relative merits of the different topologies and their applicability to real-world passenger cars

Switched predictive control design for optimal wet-clutch engagement

Modeling of hydraulic clutch transmissions is far from straightforward due to their nonlinear hybrid dynamics, i.e. switching between three dynamic phases. In this paper we identify a local linear model only for the constrained first phase, based on which a predictive controller is used to track a suitable engagement signal. The robustness of this controller in the latter two phases is guaranteed by making the constraints inactive and pre-tuning the control parameters based on its closed loop formulation and applying robust stability theorem. This controller is then implemented in real-time on a wet-clutch test setup and is shown to achieve optimal engagement

Estimation of fuel consumption in a hybrid electric refuse collector vehicle using a real drive cycle

Postprint (published version