Linear amplification with multiple nonlinear devices

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e ComputadoresIn mobile wireless systems, where there are strict power and bandwidth constrains it is desirable to adopt energy efficient constellations combined with powerful equalizer. However, this increased spectral efficiency of multilevel modulations comes at the expense of reduced power efficiency, which is undesirable in systems where power consumption is a constraint. Hence, minimization of the transmitted energy would enable a significant reduction in the total energy consumption of the wireless mobile devices. A simple and practical constellation optimization design would optimize the transmitted energy with a minimum increase in system complexity. The constellation decomposition in terms of a sum of BPSK (Bi-Phase Shift Keying) sub-constellations, relies on an analytical characterization of the mapping rule were the constellation symbols are written as a linear function of the transmitted bits. Moreover, large constellations in general and non-uniform constellations in particular are very sensitive to interference, namely the residual ISI (Inter-Symbol Interference) at the output of a practical equalizer that does not invert completely the channel effects. IB-DFE(Iterative Block DFE) is a promising iterative frequency domain equalization technique for SC-FDE schemes (Single-Carrier with Frequency Domain Equalization) that allows excellent performance. Therefore it is possible to use the decomposition of constellations on BPSK components to define a pragmatic method for designing IB-DFE receivers that can be employed with any constellation. In this thesis we consider SC-DFE schemes based on high orderM-ary energy optimized constellations with IB-DFE receivers. It is proposed a method for designing the receiver that does not require a significant increase in system complexity and can be used for the computation of the receiver parameters for any constellation. This method is then employed to design iterative receivers, implemented in the frequency-domain, which can cope with higher sensitivity to ISI effects of the constellations resulting from the energy optimization process.Fundação para a Ciência e Tecnologia - MPSat (PTDC/EEA-TEL/099074/2008) projec

Multiple Input Multiple Output System with Multi User Support Based on Directive Information Transmission

Low interference and privacy are crucial requirements for system reliability and security. Present and further mobile communication systems must support multiple users achieving at same time low interference levels. Several solutions can be adopted to reduce interference between users, such as spreading codes or beam forming. For very high bit rates ¯rst solution must be discarded. On the other hand, in environments with a very high number of users beamforming can impose demanding hardware requirements in mobile devices, which is undesirable. Transmitters with directivity introduced at information level where the transmitted constellation is only optimized in the desired direction can also be used to assure low interference. Under this approach, power e±ciency on ampli¯cation can be also improved, due to the fact that constellations are decomposed into several BPSK (Bi Phase Shift Keying) or QPSK components (Quadri-Phase Shift Keying), being each one separately ampli¯ed and transmitted independently by an antenna. Therefore, several users can coexist since each user must know the con¯guration parameters associated to the constellation con¯guration, i.e., the direction in which the constellation is optimized, otherwise receives a degenerated constellation with useless data. The simulation results show the e®ectiveness in user data stream separation of the proposed approach

Simulation Study of Digitized Enhanced Feher Quadrature Phase Shift Keying (EFQPSK)

Digitized enhanced Feher quadrature phase-shift keying (EFQPSK) can be realized with a set of parameters that define its efficiency relative to analog EFQPSK and quadrature phase-shift keying (QPSK). Both sampling frequency and quantization play a significant role in developing an EFQPSK signal that resembles its analog counterpart in spectral efficiency, envelope fluctuation, and BER. Sampling frequency and quantization can be used to determine spectral efficiency as compared to analog EFQPSK and QPSK. Through simulation, this study compares and quantifies trade-offs between spectral efficiency, envelope fluctuation, and BER. By quantifying the trade-off between these parameters, system designers can quickly determine how to meet bandwidth efficiency and power efficiency requirements

Low-Complexity Equalisers for Offset Constellations in Massive MIMO Schemes

This work was supported in part by the European Regional Development Fund (FEDER), through the Competitiveness and Internationalization Operational Program of the Portugal 2020 Framework, in part by the Regional OP Centro under Grant POCI-01-0145-FEDER-030588, in part by the Regional OP Lisboa under Grant Lisboa-01-0145-FEDER-03058, in part by the FCT/MEC through national funds of MASSIVE5G Project under Grant SAICT-45-2017-02 and PES3N Project under Grant 2018-SAICT-45-2017-POCI-01-0145-FEDER-030629, in part by the UID/EEE/50008/2019 Project, and in part by the FCT Ph.D. under Grant SFRH/BD/108522/2015.Massive multi-input-multi-output (m-MIMO) schemes require low-complexity implementations at both the transmitter and the receiver side, especially for systems operation at millimeter wave (mmWave) bands. In this paper, we consider the use of offset constellations in m-MIMO systems operating at mmWave frequencies. These signals are designed to have either an almost constant envelope or be decomposed as the sum of constant-envelope signals, making them compatible with strongly nonlinear power amplifiers, which can have low-implementation complexity and high amplification efficient, making them particularly interesting for mmWave communications. We design and evaluate low-complexity frequency-domain receivers for offset signals. It is shown that the proposed receivers can have excellent performance/complexity trade-offs in m-MIMO scenarios, making them particularly interesting for future wireless systems operating at mmWave bands.publishersversionpublishe

Implementação de códigos LDPC em OFDM e SC-FDE

Os desenvolvimentos dos sistemas de comunicação sem fios apontam para transmissões de alta velocidade e alta qualidade de serviço com um uso eficiente de energia. Eficiência espectral pode ser obtida por modulações multinível, enquanto que melhorias na eficiência de potência podem ser proporcionadas pelo uso de códigos corretores de erros. Os códigos Low-Density Parity-Check (LDPC), devido ao seu desempenho próximo do limite de Shannon e baixa complexidade na implementação e descodificação são apropriados para futuros sistemas de comunicações sem fios. Por outro lado, o uso de modulações multinível acarreta limitações na amplificação. Contudo, uma amplificação eficiente pode ser assegurada por estruturas de transmissão onde as modulações multinível são decompostas em submodulações com envolvente constante que podem ser amplificadas por amplificadores não lineares a operar na zona de saturação. Neste tipo de estruturas surgem desvios de fase e ganho, produzindo distorções na constelação resultante da soma de todos os sinais amplificados. O trabalho foca-se no uso dos códigos LDPC em esquemas multiportadora e monoportadora, com especial ênfase na performance de uma equalização iterativa implementada no domínio da frequência por um Iterative Block-Decision Feedback Equalizer (IB-DFE). São analisados aspectos como o impacto do número de iterações no processo de descodificação dentro das iterações do processo de equalização. Os códigos LDPC também serão utilizados para compensar os desvios de fase em recetores iterativos para sistemas baseados em transmissores com vários ramos de amplificação. É feito um estudo sobre o modo como estes códigos podem aumentar a tolerância a erros de fase que incluí uma análise da complexidade e um algoritmo para estimação dos desequilíbrios de fase

Design of zigbee transceiver for IEEE 802.15.4 using matlab/simulink

ZigBee technology was developed for a wireless personal area networks (PAN), aimed at control and military applications with low data rate and low power consumption. This thesis is mainly focusing on development of Matlab/Simulink model for ZigBee transceiver at physical layer using IEEE 802.15.4. ZigBee is a low-cost, low-power, wireless mesh networking standard. First, the low cost allows the technology to be widely deployed in wireless control and monitoring applications. Second, the low power-usage allows longer life with smaller batteries. Third, the mesh networking provides high reliability and more extensive range. The work presented here is to show how we can implement ZigBee transceiver with its specifications by using Matlab/simulink, without using complex mathematical blocks. A ZigBee chip can tested and prepared by shifting the whole work from matlab environment to cadance environment. This can be done by HDL languages like Verilog HDL. Here, Minimum Shift Keying (MSK) modulation technique is described, an analysis of which shows that the theoretical maximum bandwidth efficiency of MSK is 2 bits/s/Hz which is same as for Quadrature Phase Shift Keying (QPSK) and Offset Quadrature Phase Shift Keying (Offset QPSK). The implementation clearly confirms the viability of theoritical approach. Results show that OQPSK modulation with half sine pulse shaping is perfectly employed ZigBee technology

Program of the 3rd International Conference on Signal Processing and Communication Systems, Omaha, Nebraska, 28-30 September 2009

10 sessions; 2 poster sessions. Schedule and Table of Contents