Global Localization based on Evolutionary Optimization Algorithms for Indoor and Underground Environments

Mención Internacional en el título de doctorA fully autonomous robot is defined by its capability to sense, understand and move within the environment to perform a specific task. These qualities are included within the concept of navigation. However, among them, a basic transcendent one is localization, the capacity of the system to know its position regarding its surroundings. Therefore, the localization issue could be defined as searching the robot’s coordinates and rotation angles within a known environment. In this thesis, the particular case of Global Localization is addressed, when no information about the initial position is known, and the robot relies only on its sensors. This work aims to develop several tools that allow the system to locate in the two most usual geometric map representations: occupancy maps and Point Clouds. The former divides the dimensional space into equally-sized cells coded with a binary value distinguishing between free and occupied space. Point Clouds define obstacles and environment features as a sparse set of points in the space, commonly measured through a laser sensor. In this work, various algorithms are presented to search for that position through laser measurements only, in contrast with more usual methods that combine external information with motion information of the robot, odometry. Therefore, the system is capable of finding its own position in indoor environments, with no necessity of external positioning and without the influence of the uncertainty that motion sensors typically induce. Our solution is addressed by implementing various stochastic optimization algorithms or Meta-heuristics, specifically those bio-inspired or commonly known as Evolutionary Algorithms. Inspired by natural phenomena, these algorithms are based on the evolution of a series of particles or population members towards a solution through the optimization of a cost or fitness function that defines the problem. The implemented algorithms are Differential Evolution, Particle Swarm Optimization, and Invasive Weed Optimization, which try to mimic the behavior of evolution through mutation, the movement of swarms or flocks of animals, and the colonizing behavior of invasive species of plants respectively. The different implementations address the necessity to parameterize these algorithms for a wide search space as a complete three-dimensional map, with exploratory behavior and the convergence conditions that terminate the search. The process is a recursive optimum estimation search, so the solution is unknown. These implementations address the optimum localization search procedure by comparing the laser measurements from the real position with the one obtained from each candidate particle in the known map. The cost function evaluates this similarity between real and estimated measurements and, therefore, is the function that defines the problem to optimize. The common approach in localization or mapping using laser sensors is to establish the mean square error or the absolute error between laser measurements as an optimization function. In this work, a different perspective is introduced by benefiting from statistical distance or divergences, utilized to describe the similarity between probability distributions. By modeling the laser sensor as a probability distribution over the measured distance, the algorithm can benefit from the asymmetries provided by these divergences to favor or penalize different situations. Hence, how the laser scans differ and not only how much can be evaluated. The results obtained in different maps, simulated and real, prove that the Global Localization issue is successfully solved through these methods, both in position and orientation. The implementation of divergence-based weighted cost functions provides great robustness and accuracy to the localization filters and optimal response before different sources and noise levels from sensor measurements, the environment, or the presence of obstacles that are not registered in the map.Lo que define a un robot completamente autónomo es su capacidad para percibir el entorno, comprenderlo y poder desplazarse en ´el para realizar las tareas encomendadas. Estas cualidades se engloban dentro del concepto de la navegación, pero entre todas ellas la más básica y de la que dependen en buena parte el resto es la localización, la capacidad del sistema de conocer su posición respecto al entorno que lo rodea. De esta forma el problema de la localización se podría definir como la búsqueda de las coordenadas de posición y los ángulos de orientación de un robot móvil dentro de un entorno conocido. En esta tesis se aborda el caso particular de la localización global, cuando no existe información inicial alguna y el sistema depende únicamente de sus sensores. El objetivo de este trabajo es el desarrollo de varias herramientas que permitan que el sistema encuentre la localización en la que se encuentra respecto a los dos tipos de mapa más comúnmente utilizados para representar el entorno: los mapas de ocupación y las nubes de puntos. Los primeros subdividen el espacio en celdas de igual tamaño cuyo valor se define de forma binaria entre espacio libre y ocupado. Las nubes de puntos definen los obstáculos como una serie dispersa de puntos en el espacio comúnmente medidos a través de un láser. En este trabajo se presentan varios algoritmos para la búsqueda de esa posición utilizando únicamente las medidas de este sensor láser, en contraste con los métodos más habituales que combinan información externa con información propia del movimiento del robot, la odometría. De esta forma el sistema es capaz de encontrar su posición en entornos interiores sin depender de posicionamiento externo y sin verse influenciado por la deriva típica que inducen los sensores de movimiento. La solución se afronta mediante la implementación de varios tipos de algoritmos estocásticos de optimización o Meta-heurísticas, en concreto entre los denominados bio-inspirados o comúnmente conocidos como Algoritmos Evolutivos. Estos algoritmos, inspirados en varios fenómenos de la naturaleza, se basan en la evolución de una serie de partículas o población hacia una solución en base a la optimización de una función de coste que define el problema. Los algoritmos implementados en este trabajo son Differential Evolution, Particle Swarm Optimization e Invasive Weed Optimization, que tratan de imitar el comportamiento de la evolución por mutación, el movimiento de enjambres o bandas de animales y la colonización por parte de especies invasivas de plantas respectivamente. Las distintas implementaciones abordan la necesidad de parametrizar estos algoritmos para un espacio de búsqueda muy amplio como es un mapa completo, con la necesidad de que su comportamiento sea muy exploratorio, así como las condiciones de convergencia que definen el fin de la búsqueda ya que al ser un proceso recursivo de estimación la solución no es conocida. Estos algoritmos plantean la forma de buscar la localización ´optima del robot mediante la comparación de las medidas del láser en la posición real con lo esperado en la posición de cada una de esas partículas teniendo en cuenta el mapa conocido. La función de coste evalúa esa semejanza entre las medidas reales y estimadas y por tanto, es la función que define el problema. Las funciones típicamente utilizadas tanto en mapeado como localización mediante el uso de sensores láser de distancia son el error cuadrático medio o el error absoluto entre distancia estimada y real. En este trabajo se presenta una perspectiva diferente, aprovechando las distancias estadísticas o divergencias, utilizadas para establecer la semejanza entre distribuciones probabilísticas. Modelando el sensor como una distribución de probabilidad entorno a la medida aportada por el láser, se puede aprovechar la asimetría de esas divergencias para favorecer o penalizar distintas situaciones. De esta forma se evalúa como difieren las medias y no solo cuanto. Los resultados obtenidos en distintos mapas tanto simulados como reales demuestran que el problema de la localización se resuelve con éxito mediante estos métodos tanto respecto al error de estimación de la posición como de la orientación del robot. El uso de las divergencias y su implementación en una función de coste ponderada proporciona gran robustez y precisión al filtro de localización y gran respuesta ante diferentes fuentes y niveles de ruido, tanto de la propia medida del sensor, del ambiente y de obstáculos no modelados en el mapa del entorno.Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de MadridPresidente: Fabio Bonsignorio.- Secretario: María Dolores Blanco Rojas.- Vocal: Alberto Brunete Gonzále

Using the Jensen-Shannon, density power, and Itakura-Saito divergences to implement an evolutionary-based global localization filter for mobile robots

One of the most demanding skills for a mobile robot is to be intelligent enough to know its own location. The global localization problem consists of obtaining the robot's pose (position and orientation) in a known map if the initial location is unknown. This task is addressed applying evolutionary computation concepts (Differential Evolution). In the current approach, the distances obtained from the laser sensors are combined with the predicted scan (in the known map) from possible locations to implement a cost function that is optimized by an evolutionary filter. The laser beams (sensor information) are modeled using a combination of probability distributions to implement a non-symmetric fitness function. The main contribution of this paper is to apply the probabilistic approach to design three different cost functions based on known divergences (Jensen-Shannon, Itakura-Saito, and density power). The three metrics have been tested in different experiments and the localization module performance is exceptional in regions with occlusions caused by different obstacles. This fact validates that the non-symmetric probabilistic approach is a suitable technique to be applied to multiple metrics.This work was supported by the Competitive Improvement of Drilling and Blasting Cycle in Mining and Underground-Works through New Techniques of Engineering, Explosives, Prototypes, and Advanced Tools, which is a Research and Development project undertaken by the following companies: Obras Subterr a neas, MaxamCorp Holding, Putzmeister Iberica, Subterra Ingenieria, Expace On Boards Systems, Dacartec Servicios Informaticos, and Cepasa Ensayos Geotecnicos

Computer vision and optimization methods applied to the measurements of in-plane deformations

fi=vertaisarvioitu|en=peerReviewed

Differential evolution Markov chain filter for global localization

A key challenge for an autonomous mobile robot is to estimate its location according to the available information. A particular aspect of this task is the global localization problem. In our previous work, we developed an algorithm based on the Differential Evolution method that solves this problem in 2D and 3D environments. The robot’s pose is represented by a set of possible location estimates weighted by a fitness function. The Markov Chain Monte Carlo algorithms have been successfully applied to multiple fields such as econometrics or computing science. It has been demonstrated that they can be combined with the Differential Evolution method to solve efficiently many optimization problems. In this work, we have combined both approaches to develop a global localization filter. The algorithm performance has been tested in simulated and real maps. The population requirements have been reduced when compared to the previous version.The research leading to these results has received funding from the RoboCity2030-III-CM project (Robotica aplicada a la mejora de la calidad de vida de los ciudadanos. fase III; S2013/MIT-2748), funded by Programas de Actividades I+D en la Comunidad de Madrid and cofunded by Structural Funds of the EU.Publicad

Global localization based on a rejection differential evolution filter

Autonomous systems are able to move from one point to another in a given environment because they can solve two basic problems: the localization problem and the navigation problem. The localization purpose is to determine the current pose of the autonomous robot or system and the navigation purpose is to find out a feasible path from the current pose to the goal point that avoids any obstacle present in the environment. Obviously, without a reliable localization system it is not possible to solve the navigation problem. Both problems are among the oldest problems in human travels and have motivated a considerable amount of technological advances in human history. They are also present in robot motion around the environment and have also motivated a considerable research effort to solve them in an efficient way

Intelligent Processing in Wireless Communications Using Particle Swarm Based Methods

There are a lot of optimization needs in the research and design of wireless communica- tion systems. Many of these optimization problems are Nondeterministic Polynomial (NP) hard problems and could not be solved well. Many of other non-NP-hard optimization problems are combinatorial and do not have satisfying solutions either. This dissertation presents a series of Particle Swarm Optimization (PSO) based search and optimization algorithms that solve open research and design problems in wireless communications. These problems are either avoided or solved approximately before. PSO is a bottom-up approach for optimization problems. It imposes no conditions on the underlying problem. Its simple formulation makes it easy to implement, apply, extend and hybridize. The algorithm uses simple operators like adders, and multipliers to travel through the search space and the process requires just five simple steps. PSO is also easy to control because it has limited number of parameters and is less sensitive to parameters than other swarm intelligence algorithms. It is not dependent on initial points and converges very fast. Four types of PSO based approaches are proposed targeting four different kinds of problems in wireless communications. First, we use binary PSO and continuous PSO together to find optimal compositions of Gaussian derivative pulses to form several UWB pulses that not only comply with the FCC spectrum mask, but also best exploit the avail- able spectrum and power. Second, three different PSO based algorithms are developed to solve the NLOS/LOS channel differentiation, NLOS range error mitigation and multilateration problems respectively. Third, a PSO based search method is proposed to find optimal orthogonal code sets to reduce the inter carrier interference effects in an frequency redundant OFDM system. Fourth, a PSO based phase optimization technique is proposed in reducing the PAPR of an frequency redundant OFDM system. The PSO based approaches are compared with other canonical solutions for these communication problems and showed superior performance in many aspects. which are confirmed by analysis and simulation results provided respectively. Open questions and future Open questions and future works for the dissertation are proposed to serve as a guide for the future research efforts

Source localization within a uniform circular sensor array

Traditional source localization problems have been considered with linear and planar antenna arrays. In this research work, we assume that the sources are located within a uniformly spaced circular sensor array. Using a modified Metropolis algorithm and Polak-Ribière conjugate gradients, a hybrid optimization algorithm is proposed to localize sources within a two dimensional uniform circular sensor array, which suffers from far field attenuation. The developed algorithm is capable of accurately locating the position of a single, stationary source within 1% of a wavelength and 1° of angular displacement. In the single stationary source case, the simulated Cramer-Rao Lower Bound has also shown low noise susceptibility for a reasonable signal to noise ratio. Additionally, the localization of multiple stationary sources within the array is presented and tracking capabilities for a slowly moving non-stationary source is also demonstrated. In each case, results are presented, analyzed and discussed. Furthermore, the proposed algorithm has also been validated through hardware experimentation. The design and construction of four microstrip patch antennas and a wire antenna have been completed to emulate a circular sensor array and the enclosed source, respectively. Within this array, data has been collected at the four sensors from several fixed source positions and fitted into the proposed algorithm for source localization. The convergence of the algorithm with both simulated data and data collected from hardware are compared and sources of error and potential improvements are proposed

Intelligent joint channel parameter estimation techniques for mobile wireless positioning applications

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Mobile wireless positioning has recently received great attention. For mobile wireless communication networks, an inherently suitable approach is to obtain the parameters that are used for positioning estimates from the radio signal measurements between a mobile device and one or more xed base stations. However, obtaining accurate estimates of these location-dependent channel parameters is a challenging task. The focus of this thesis is on the estimation of these channel parameters for mobile wireless positioning applications. In particular, we investigate novel estimators that jointly estimate more than one type of channel parameters. We rst perform a comprehensive critical review on the most recent and popular joint channel parameter estimation techniques. Secondly, we improve a state-of-the-art technique, namely the Space Alternating Generalised Expectation maximisation (SAGE) algorithm by employing adaptive interference cancellation to improve the estimation accuracy of weaker paths. Thirdly, a novel intelligent channel parameter estimation technique using Evolution Strategy (ES) is proposed to overcome the drawbacks of the existing iterative maximum likelihood methods. Furthermore, given that in reality it is di cult to obtain the number of multipath in advance, we propose a two tier Hierarchically Organised ES to jointly estimate the number of multipath as well as the channel parameters. Finally, we extend the proposed ES method to further estimate the Doppler shift in mobile environments. Our proposed intelligent joint channel estimation techniques are shown to exhibit excellent performance even with low Signal to Noise Ratio (SNR) channel conditions as well as robust against uncertainties in initialisations.EPSRC and Cambridge Silicon Radi