Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Self-checking on-line testable static RAM

This is a fault-tolerant random access memory for use in fault-tolerant computers. It comprises a plurality of memory chips each comprising a plurality of on-line testable and correctable memory cells disposed in rows and columns for holding individually addressable binary bits and provision for error detection incorporated into each memory cell for outputting an error signal whenever a transient error occurs therein. In one embodiment, each of the memory cells comprises a pair of static memory sub-cells for simultaneously receiving and holding a common binary data bit written to the memory cell and the error detection provision comprises comparator logic for continuously sensing and comparing the contents of the memory sub-cells to one another and for outputting the error signal whenever the contents do not match. In another embodiment, each of the memory cells comprises a static memory sub-cell and a dynamic memory sub-cell for simultaneously receiving and holding a common binary data bit written to the memory cell and the error detection provision comprises comparator logic for continuously sensing and comparing the contents of the static memory sub-cell to the dynamic memory sub-cell and for outputting the error signal whenever the contents do not match. Capability for correction of errors is also included

Immunotronics - novel finite-state-machine architectures with built-in self-test using self-nonself differentiation

A novel approach to hardware fault tolerance is demonstrated that takes inspiration from the human immune system as a method of fault detection. The human immune system is a remarkable system of interacting cells and organs that protect the body from invasion and maintains reliable operation even in the presence of invading bacteria or viruses. This paper seeks to address the field of electronic hardware fault tolerance from an immunological perspective with the aim of showing how novel methods based upon the operation of the immune system can both complement and create new approaches to the development of fault detection mechanisms for reliable hardware systems. In particular, it is shown that by use of partial matching, as prevalent in biological systems, high fault coverage can be achieved with the added advantage of reducing memory requirements. The development of a generic finite-state-machine immunization procedure is discussed that allows any system that can be represented in such a manner to be "immunized" against the occurrence of faulty operation. This is demonstrated by the creation of an immunized decade counter that can detect the presence of faults in real tim

Large-scale memristive associative memories

Associative memories, in contrast to conventional address-based memories, are inherently fault-tolerant and allow retrieval of data based on partial search information. This paper considers the possibility of implementing large-scale associative memories through memristive devices jointly with CMOS circuitry. An advantage of a memristive associative memory is that the memory elements are located physically above the CMOS layer, which yields more die area for the processing elements realized in CMOS. This allows for high-capacity memories even while using an older CMOS technology, as the capacity of the memory depends more on the feature size of the memristive crossbar than on that of the CMOS components. In this paper, we propose the memristive implementations, and present simulations and error analysis of the autoassociative content-addressable memory, the Willshaw memory, and the sparse distributed memory. Furthermore, we present a CMOS cell that can be used to implement the proposed memory architectures.</div

Quantum-dot Cellular Automata: Review Paper

Quantum-dot Cellular Automata (QCA) is one of the most important discoveries that will be the successful alternative for CMOS technology in the near future. An important feature of this technique, which has attracted the attention of many researchers, is that it is characterized by its low energy consumption, high speed and small size compared with CMOS.&nbsp; Inverter and majority gate are the basic building blocks for QCA circuits where it can design the most logical circuit using these gates with help of QCA wire. Due to the lack of availability of review papers, this paper will be a destination for many people who are interested in the QCA field and to know how it works and why it had taken lots of attention recentl

A writable programmable logic array

This thesis contains the analysis, design, and implementation of a writable programmable logic array integrated circuit. The WPLA is able to be reprogrammed any number of times as needed. A content addressable scheme is proposed to conduct READ, WRITE, and SEARCH operations in the WPLA. The WPLA is programmed by writing binary data into storage cells associated with each node in the AND/OR planes of the array; the binary data then form the personalities of the PLA. The layout of the WPLA will be implemented using Mentor Graphic\u27s CHIPGRAPH layout editor with 2 µm NMOS technology and MOSIS design rules. The event-driven logic level simulator QUICKSIM, and a MOS circuit level simulator MSIMON, are used to verify the functional and timing behavior of the WPLA