Fast fault location for fast restoration of smart electrical distribution grids

© 2016 IEEE. Distribution systems are evolving towards fault self-healing systems which can quickly identify and isolate faulted components and restore supply to the affected customers with little human intervention. A self-healing mechanism can considerably reduce the outage times and improve the continuity of supply; however, such an improvement requires a fast fault location method and also a communication and measurement infrastructure. In this paper the feasibility of fast service restoration through a fast fault location method is studied. A fast fault location method is proposed which is applicable to any distribution network with laterals, load taps and heterogeneous lines. The performance of the proposed method is evaluated by simulation tests on a real 13.8 kV, 134-node distribution system under different fault conditions. The results verify the applicability of the proposed architecture. We show that the communication delay plays a less important role in overall restoration time, and we stress the contribution of a fast fault location method in keeping the overall interruption time less than 1 minute

System configuration, fault detection, location, isolation and restoration: a review on LVDC Microgrid protections

Low voltage direct current (LVDC) distribution has gained the significant interest of research due to the advancements in power conversion technologies. However, the use of converters has given rise to several technical issues regarding their protections and controls of such devices under faulty conditions. Post-fault behaviour of converter-fed LVDC system involves both active converter control and passive circuit transient of similar time scale, which makes the protection for LVDC distribution significantly different and more challenging than low voltage AC. These protection and operational issues have handicapped the practical applications of DC distribution. This paper presents state-of-the-art protection schemes developed for DC Microgrids. With a close look at practical limitations such as the dependency on modelling accuracy, requirement on communications and so forth, a comprehensive evaluation is carried out on those system approaches in terms of system configurations， fault detection, location, isolation and restoration

Software Defined Networks based Smart Grid Communication: A Comprehensive Survey

The current power grid is no longer a feasible solution due to ever-increasing user demand of electricity, old infrastructure, and reliability issues and thus require transformation to a better grid a.k.a., smart grid (SG). The key features that distinguish SG from the conventional electrical power grid are its capability to perform two-way communication, demand side management, and real time pricing. Despite all these advantages that SG will bring, there are certain issues which are specific to SG communication system. For instance, network management of current SG systems is complex, time consuming, and done manually. Moreover, SG communication (SGC) system is built on different vendor specific devices and protocols. Therefore, the current SG systems are not protocol independent, thus leading to interoperability issue. Software defined network (SDN) has been proposed to monitor and manage the communication networks globally. This article serves as a comprehensive survey on SDN-based SGC. In this article, we first discuss taxonomy of advantages of SDNbased SGC.We then discuss SDN-based SGC architectures, along with case studies. Our article provides an in-depth discussion on routing schemes for SDN-based SGC. We also provide detailed survey of security and privacy schemes applied to SDN-based SGC. We furthermore present challenges, open issues, and future research directions related to SDN-based SGC.Comment: Accepte

Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Monitoring and Fault Location Sensor Network for Underground Distribution Lines

One of the fundamental tasks of electric distribution utilities is guaranteeing a continuous supply of electricity to their customers. The primary distribution network is a critical part of these facilities because a fault in it could affect thousands of customers. However, the complexity of this network has been increased with the irruption of distributed generation, typical in a Smart Grid and which has significantly complicated some of the analyses, making it impossible to apply traditional techniques. This problem is intensified in underground lines where access is limited. As a possible solution, this paper proposes to make a deployment of a distributed sensor network along the power lines. This network proposes taking advantage of its distributed character to support new approaches of these analyses. In this sense, this paper describes the aquiculture of the proposed network (adapted to the power grid) based on nodes that use power line communication and energy harvesting techniques. In this sense, it also describes the implementation of a real prototype that has been used in some experiments to validate this technological adaptation. Additionally, beyond a simple use for monitoring, this paper also proposes the use of this approach to solve two typical distribution system operator problems, such as: fault location and failure forecasting in power cables.Ministerio de Economía y Competitividad, Government of Spain project Sistema Inteligente Inalámbrico para Análisis y Monitorización de Líneas de Tensión Subterráneas en Smart Grids (SIIAM) TEC2013-40767-RMinisterio de Educación, Cultura y Deporte, Government of Spain, for the funding of the scholarship Formación de Profesorado Universitario 2016 (FPU 2016

Automatic fault location in electrical distribution networks with distributed generation

Nowadays the electrical network is continuously evolving due to the increasing deployment of Information Technologies and the Distribution Energy Resources. This scenario affects directly to the quality of service in the electrical distribution networks. For this reason, the Power Quality is a key important concern to make the electrical network evolve towards a Smart Grid. Power quality is defined through three important focal points: availability, wave quality and commercial quality. The presence of the Distribution Energy Resources in the current electrical distribution network is showing a new scenario where the fault detection is more complex due to the flow current is in both directions. This thesis is focused in the analysis of several methods to locate a fault in electrical distribution network and also how the current communication standards can improve considerably this fault location. It is important to remark that the main contribution of this thesis is in the analysis of several propositions and algorithms to enhance the fault location in a distribution network using the current Intelligent Electronic Device with international standards such as IEC 61850. All of these algorithms have been focused to work in a mesh distribution networks. Another important contribution of this thesis is in the adaptive protection system in order to isolate correctly the fault in a ring system distribution. Although this proposition could be extended to a mesh network where the elements of the network can operate under a fault. Finally, the thesis concludes that the use of communication standards and Internet of Things with current developed Intelligent Electronic Devices technology can contribute significantly to enhance the current and future electrical network distribution.La xarxa elèctrica evoluciona contínuament a causa del creixent desplegament de les Tecnologies de la Informació i dels Recursos Energètics Distribuïts. Aquest escenari afecta directament a la qualitat de servei de les xarxes de distribució elèctrica. Per aquest motiu, el mantenir i millorar el nivell de qualitat d'energia és un punt clau per fer evolucionar la xarxa elèctrica cap a una xarxa Smart Grid. Aquesta qualitat de l'energia es defineix per medi de de tres punts importants: disponibilitat, qualitat d'ona i qualitat comercial. La presència dels Recursos Energètics Distribuïts mostra un nou escenari en què la detecció de defectes es complica afectant a la disponibilitat del servei. Aquesta tesi es centra principalment en l'anàlisi de diversos mètodes per localitzar un defecte a la xarxa de distribució elèctrica i també en com l'ús dels estàndards de comunicació actuals poden contribuir considerablement a la localització del defecte. És important remarcar que la principal contribució d'aquest document ha estat en l'anàlisi de diverses proposicions i algoritmes per millorar la localització de faltes en una xarxa de distribució utilitzant Dispositius Electrònics Intel·ligents amb estàndards internacionals com l'IEC 61850. Tots aquests algoritmes han estat definits per treballar en xarxes de distribució mallades. Una altra contribució important d'aquesta tesi es troba en el sistema de protecció adaptatiu per tal d'aïllar correctament el defecte en una distribució del sistema d'anell amb interruptors automàtics. Aquesta proposta es podria ampliar a una xarxa mallada. Finalment, la tesi conclou amb que l'ús d'estàndards de comunicació i l'Internet of Things en combinació amb Dispositius Electrònics Intel·ligents, desenvolupats actualment, poden contribuir significativament a millorar la distribució de la xarxa elèctrica actual i futura.Postprint (published version

Comparisons of MVAC and MVDC systems in dynamic operation, fault protection and post-fault restoration

One of the most significant obstacles preventing the large-scale application of direct-current (DC) technology in medium voltage (MV) distribution networks is their fault protection. The existing AC relay protection needs to be changed or redesigned to protect the future overlay MVAC and MVDC distribution networks. Therefore, a comprehensive understanding of the dynamic and fault behavior and post-fault restoration strategies of MVAC and MVDC systems are critically important. Moreover, a comparison of MVAC and MVDC systems during a fault will also contribute to designing the protection systems of hybrid MV AC/DC systems. In this paper, the challenges of protecting DC faults of MVDC systems and possible solutions are first introduced. Then, the fault characteristics and post-fault restoration of MVDC and MVAC distribution systems are compared and investigated through case studies. Time-domain simulations have been conducted in PSCAD/EMTDC. The work in this paper will be valuable for the protection design for future hybrid MV AC/DC systems

A survey on power grid faults and their origins: A contribution to improving power grid resilience

UID/EEA/00066/2019One of the most critical infrastructures in the world is electrical power grids (EPGs). New threats affecting EPGs, and their different consequences, are analyzed in this survey along with different approaches that can be taken to prevent or minimize those consequences, thus improving EPG resilience. The necessity for electrical power systems to become resilient to such events is becoming compelling; indeed, it is important to understand the origins and consequences of faults. This survey provides an analysis of different types of faults and their respective causes, showing which ones are more reported in the literature. As a result of the analysis performed, it was possible to identify four clusters concerning mitigation approaches, as well as to correlate them with the four different states of the electrical power system resilience curve.publishe