An Improved Lagrangian Relaxation Method for VLSI Combinational Circuit Optimization

Gate sizing and threshold voltage (Vt) assignment are very popular and useful techniques in current very large scale integration (VLSI) design flow for timing and power optimization. Lagrangian relaxation (LR) is a common method for handling multi-objectives and proven to reach optimal solution under continuous solution space. However, it is more complex to use Lagrangian relaxation under discrete solution space. The Lagrangian dual problem is non-convex and previously a sub-gradient method was used to solve it. The sub-gradient method is a greedy approach for substituting gradient method in the deepest descent method, and has room for further improvement. In addition, Lagrangian sub-problem cannot be solved directly by mathematical approaches under discrete solution space. Here we propose a new Lagrangian relaxation-based method for simultaneous gate sizing and Vt assignment under discrete solution space. In this work, some new approaches are provided to solve the Lagrangian dual problem considering not only slack but also the relationship between Lagrangian multipliers and circuit timing. We want to solve the Lagrangian dual problem more precisely than did previous methods, such as the sub-gradient method. In addition, a table-lookup method is provided to replace mathematical approaches for solving the Lagrangian sub-problem under discrete size and Vt options. The experimental results show that our method can lead to about 50 percent and 58 percent power reduction subject to the same timing constraints compared with a Lagrangian relaxation method using sub-gradient method and a state-of-the-art previous work. These two methods are implemented by us for comparison. Our method also results in better circuit timing subject to tight timing constraints

Discrete Gate Sizing Methodologies for Delay, Area and Power Optimization

The modeling of an individual gate and the optimization of circuit performance has long been a critical issue in the VLSI industry. In this work, we first study of the gate sizing problem for today\u27s industrial designs, and explore the contributions and limitations of all the existing approaches, which mainly suffer from producing only continuous solutions, using outdated timing models or experiencing performance inefficiency. In this dissertation, we present our new discrete gate sizing technique which optimizes different aspects of circuit performance, including delay, area and power consumption. And our method is fast and efficient as it applies the local search instead of global exhaustive search during gate size selection process, which greatly reduces the search space and improves the computation complexity. In addition to that, it is also flexible with different timing models, and it is able to deal with the constraints of input/output slew and output load capacitance, under which very few previous research works were reported. We then propose a new timing model, which is derived from the classic Elmore delay model, but takes the features of modern timing models from standard cell library. With our new timing model, we are able to formulate the combinatorial discrete sizing problem as a simplified mathematical expression and apply it to existing Lagrangian relaxation method, which is shown to converge to optimal solution. We demonstrate that the classic Elmore delay model based gate sizing approaches can still be valid. Therefore, our work might provide a new look into the numerous Elmore delay model based research works in various areas (such as placement, routing, layout, buffer insertion, timing analysis, etc.)

Algorithms for Circuit Sizing in VLSI Design

One of the key problems in the physical design of computer chips, also known as integrated circuits, consists of choosing a  physical layout  for the logic gates and memory circuits (registers) on the chip. The layouts have a high influence on the power consumption and area of the chip and the delay of signal paths.  A discrete set of predefined layouts  for each logic function and register type with different physical properties is given by a library. One of the most influential characteristics of a circuit defined by the layout is its size. In this thesis we present new algorithms for the problem of choosing sizes for the circuits and its continuous relaxation,  and  evaluate these in theory and practice. A popular approach is based on Lagrangian relaxation and projected subgradient methods. We show that seemingly heuristic modifications that have been proposed for this approach can be theoretically justified by applying the well-known multiplicative weights algorithm. Subsequently, we propose a new model for the sizing problem as a min-max resource sharing problem. In our context, power consumption and signal delays are represented by resources that are distributed to customers. Under certain assumptions we obtain a polynomial time approximation for the continuous relaxation of the sizing problem that improves over the Lagrangian relaxation based approach. The new resource sharing algorithm has been implemented as part of the BonnTools software package which is developed at the Research Institute for Discrete Mathematics at the University of Bonn in cooperation with IBM. Our experiments on the ISPD 2013 benchmarks and state-of-the-art microprocessor designs provided by IBM illustrate that the new algorithm exhibits more stable convergence behavior compared to a Lagrangian relaxation based algorithm. Additionally, better timing and reduced power consumption was achieved on almost all instances. A subproblem of the new algorithm consists of finding sizes minimizing a weighted sum of power consumption and signal delays. We describe a method that approximates the continuous relaxation of this problem in polynomial time under certain assumptions. For the discrete problem we provide a fully polynomial approximation scheme under certain assumptions on the topology of the chip. Finally, we present a new algorithm for timing-driven optimization of registers. Their sizes and locations on a chip are usually determined during the clock network design phase, and remain mostly unchanged afterwards although the timing criticalities on which they were based can change. Our algorithm permutes register positions and sizes within so-called  clusters  without impairing the clock network such that it can be applied late in a design flow. Under mild assumptions, our algorithm finds an optimal solution which maximizes the worst cluster slack. It is implemented as part of the BonnTools and improves timing of registers on state-of-the-art microprocessor designs by up to 7.8% of design cycle time. </div

Timing Closure in Chip Design

Achieving timing closure is a major challenge to the physical design of a computer chip. Its task is to find a physical realization fulfilling the speed specifications. In this thesis, we propose new algorithms for the key tasks of performance optimization, namely repeater tree construction; circuit sizing; clock skew scheduling; threshold voltage optimization and plane assignment. Furthermore, a new program flow for timing closure is developed that integrates these algorithms with placement and clocktree construction. For repeater tree construction a new algorithm for computing topologies, which are later filled with repeaters, is presented. To this end, we propose a new delay model for topologies that not only accounts for the path lengths, as existing approaches do, but also for the number of bifurcations on a path, which introduce extra capacitance and thereby delay. In the extreme cases of pure power optimization and pure delay optimization the optimum topologies regarding our delay model are minimum Steiner trees and alphabetic code trees with the shortest possible path lengths. We presented a new, extremely fast algorithm that scales seamlessly between the two opposite objectives. For special cases, we prove the optimality of our algorithm. The efficiency and effectiveness in practice is demonstrated by comprehensive experimental results. The task of circuit sizing is to assign millions of small elementary logic circuits to elements from a discrete set of logically equivalent, predefined physical layouts such that power consumption is minimized and all signal paths are sufficiently fast. In this thesis we develop a fast heuristic approach for global circuit sizing, followed by a local search into a local optimum. Our algorithms use, in contrast to existing approaches, the available discrete layout choices and accurate delay models with slew propagation. The global approach iteratively assigns slew targets to all source pins of the chip and chooses a discrete layout of minimum size preserving the slew targets. In comprehensive experiments on real instances, we demonstrate that the worst path delay is within 7% of its lower bound on average after a few iterations. The subsequent local search reduces this gap to 2% on average. Combining global and local sizing we are able to size more than 5.7 million circuits within 3 hours. For the clock skew scheduling problem we develop the first algorithm with a strongly polynomial running time for the cycle time minimization in the presence of different cycle times and multi-cycle paths. In practice, an iterative local search method is much more efficient. We prove that this iterative method maximizes the worst slack, even when restricting the feasible schedule to certain time intervals. Furthermore, we enhance the iterative local approach to determine a lexicographically optimum slack distribution. The clock skew scheduling problem is then generalized to allow for simultaneous data path optimization. In fact, this is a time-cost tradeoff problem. We developed the first combinatorial algorithm for computing time-cost tradeoff curves in graphs that may contain cycles. Starting from the lowest-cost solution, the algorithm iteratively computes a descent direction by a minimum cost flow computation. The maximum feasible step length is then determined by a minimum ratio cycle computation. This approach can be used in chip design for several optimization tasks, e.g. threshold voltage optimization or plane assignment. Finally, the optimization routines are combined into a timing closure flow. Here, the global placement is alternated with global performance optimization. Netweights are used to penalize the length of critical nets during placement. After the global phase, the performance is improved further by applying more comprehensive optimization routines on the most critical paths. In the end, the clock schedule is optimized and clocktrees are inserted. Computational results of the design flow are obtained on real-world computer chips

Performance and power optimization in VLSI physical design

As VLSI technology enters the nanoscale regime, a great amount of efforts have been made to reduce interconnect delay. Among them, buffer insertion stands out as an effective technique for timing optimization. A dramatic rise in on-chip buffer density has been witnessed. For example, in two recent IBM ASIC designs, 25% gates are buffers. In this thesis, three buffer insertion algorithms are presented for the procedure of performance and power optimization. The second chapter focuses on improving circuit performance under inductance effect. The new algorithm works under the dynamic programming framework and runs in provably linear time for multiple buffer types due to two novel techniques: restrictive cost bucketing and efficient delay update. The experimental results demonstrate that our linear time algorithm consistently outperforms all known RLC buffering algorithms in terms of both solution quality and runtime. That is, the new algorithm uses fewer buffers, runs in shorter time and the buffered tree has better timing. The third chapter presents a method to guarantee a high fidelity signal transmission in global bus. It proposes a new redundant via insertion technique to reduce via variation and signal distortion in twisted differential line. In addition, a new buffer insertion technique is proposed to synchronize the transmitted signals, thus further improving the effectiveness of the twisted differential line. Experimental results demonstrate a 6GHz signal can be transmitted with high fidelity using the new approaches. In contrast, only a 100MHz signal can be reliably transmitted using a single-end bus with power/ground shielding. Compared to conventional twisted differential line structure, our new techniques can reduce the magnitude of noise by 45% as witnessed in our simulation. The fourth chapter proposes a buffer insertion and gate sizing algorithm for million plus gates. The algorithm takes a combinational circuit as input instead of individual nets and greatly reduces the buffer and gate cost of the entire circuit. The algorithm has two main features: 1) A circuit partition technique based on the criticality of the primary inputs, which provides the scalability for the algorithm, and 2) A linear programming formulation of non-linear delay versus cost tradeoff, which formulates the simultaneous buffer insertion and gate sizing into linear programming problem. Experimental results on ISCAS85 circuits show that even without the circuit partition technique, the new algorithm achieves 17X speedup compared with path based algorithm. In the meantime, the new algorithm saves 16.0% buffer cost, 4.9% gate cost, 5.8% total cost and results in less circuit delay

Some Applications of the Weighted Combinatorial Laplacian

The weighted combinatorial Laplacian of a graph is a symmetric matrix which is the discrete analogue of the Laplacian operator. In this thesis, we will study a new application of this matrix to matching theory yielding a new characterization of factor-criticality in graphs and matroids. Other applications are from the area of the physical design of very large scale integrated circuits. The placement of the gates includes the minimization of a quadratic form given by a weighted Laplacian. A method based on the dual constrained subgradient method is proposed to solve the simultaneous placement and gate-sizing problem. A crucial step of this method is the projection to the flow space of an associated graph, which can be performed by minimizing a quadratic form given by the unweighted combinatorial Laplacian.Andwendungen der gewichteten kombinatorischen Laplace-Matrix Die gewichtete kombinatorische Laplace-Matrix ist das diskrete Analogon des Laplace-Operators. In dieser Arbeit stellen wir eine neuartige Charakterisierung von Faktor-Kritikalität von Graphen und Matroiden mit Hilfe dieser Matrix vor. Wir untersuchen andere Anwendungen im Bereich des Entwurfs von höchstintegrierten Schaltkreisen. Die Platzierung basiert auf der Minimierung einer quadratischen Form, die durch eine gewichtete kombinatorische Laplace-Matrix gegeben ist. Wir präsentieren einen Algorithmus für das allgemeine simultane Platzierungs- und Gattergrößen-Optimierungsproblem, der auf der dualen Subgradientenmethode basiert. Ein wichtiger Bestandteil dieses Verfahrens ist eine Projektion auf den Flussraum eines assoziierten Graphen, die als die Minimierung einer durch die Laplace-Matrix gegebenen quadratischen Form aufgefasst werden kann

Enhancing Power Efficient Design Techniques in Deep Submicron Era

Excessive power dissipation has been one of the major bottlenecks for design and manufacture in the past couple of decades. Power efficient design has become more and more challenging when technology scales down to the deep submicron era that features the dominance of leakage, the manufacture variation, the on-chip temperature variation and higher reliability requirements, among others. Most of the computer aided design (CAD) tools and algorithms currently used in industry were developed in the pre deep submicron era and did not consider the new features explicitly and adequately. Recent research advances in deep submicron design, such as the mechanisms of leakage, the source and characterization of manufacture variation, the cause and models of on-chip temperature variation, provide us the opportunity to incorporate these important issues in power efficient design. We explore this opportunity in this dissertation by demonstrating that significant power reduction can be achieved with only minor modification to the existing CAD tools and algorithms. First, we consider peak current, which has become critical for circuit's reliability in deep submicron design. Traditional low power design techniques focus on the reduction of average power. We propose to reduce peak current while keeping the overhead on average power as small as possible. Second, dual Vt technique and gate sizing have been used simultaneously for leakage savings. However, this approach becomes less effective in deep submicron design. We propose to use the newly developed process-induced mechanical stress to enhance its performance. Finally, in deep submicron design, the impact of on-chip temperature variation on leakage and performance becomes more and more significant. We propose a temperature-aware dual Vt approach to alleviate hot spots and achieve further leakage reduction. We also consider this leakage-temperature dependency in the dynamic voltage scaling approach and discover that a commonly accepted result is incorrect for the current technology. We conduct extensive experiments with popular design benchmarks, using the latest industry CAD tools and design libraries. The results show that our proposed enhancements are promising in power saving and are practical to solve the low power design challenges in deep submicron era

Buffer insertion in large circuits using look-ahead and back-off techniques

Buffer insertion is an essential technique for reducing interconnect delay in submicron circuits. Though it is a well researched area, there is a need for robust and effective algorithms to perform buffer insertion at the circuit level. This thesis proposes a new buffer insertion algorithm for large circuits. The algorithm finds a buffering solution for the entire circuit such that buffer cost is minimized and the timing requirements of the circuit are satisfied. The algorithm iteratively inserts buffers in the circuit improving the circuit delay step by step. At the core of this algorithm are very simple but extremely effective techniques that constructively guide the search for a good buffering solution. A flexibility to adapt to the user's requirements and the ability to reduce the number of buffers are the strengths of this algorithm. Experimental results on ISCAS85 benchmark circuits show that the proposed algorithm, on average, yields 36% reduction in the number of buffers, and runs three times faster than one of the best known previously researched algorithms