Towards Internet QoS Provisioning Based on Generic Distributed QoS Adaptive Routing Engine

Increasing efficiency and quality demands of modern Internet technologies drive today’s network engineers to seek to provide quality of service (QoS). Internet QoS provisioning gives rise to several challenging issues. This paper introduces a generic distributed QoS adaptive routing engine (DQARE) architecture based on OSPFxQoS. The innovation of the proposed work in this paper is its undependability on the used QoS architectures and, moreover, splitting of the control strategy from data forwarding mechanisms, so we guarantee a set of absolute stable mechanisms on top of which Internet QoS can be built. DQARE architecture is furnished with three relevant traffic control schemes, namely, service differentiation, QoS routing, and traffic engineering. The main objective of this paper is to (i) provide a general configuration guideline for service differentiation, (ii) formalize the theoretical properties of different QoS routing algorithms and then introduce a QoS routing algorithm (QOPRA) based on dynamic programming technique, and (iii) propose QoS multipath forwarding (QMPF) model for paths diversity exploitation. NS2-based simulations proved the DQARE superiority in terms of delay, packet delivery ratio, throughput, and control overhead. Moreover, extensive simulations are used to compare the proposed QOPRA algorithm and QMPF model with their counterparts in the literature

Journal of Telecommunications and Information Technology, nr 3

kwartalni

Operational support systems for satellite communications

The role of satellite communications is changing from providing bandwidth linking network operators interconnections towards providing IP enabled communications to end users. This migration from few high-value routes towards many low-value routes means that integration and automation of processes with terrestrial networks becomes critical in driving down unit costs. Integration and automation is necessary on all planes: user, control and management. In satellite communications, management aspects, underpinned by Operational Support Systems (OSS) have received the least research attention, making this a valuable topic for study. In most areas, OSS for satellite systems are similar to other domains. However there are some notable areas of difference which have been the focus of this research. The eTOM business framework, developed by the TMF, has been used to highlight aspects of OSS unique to satellite. Since satellite capacity represents the highest operational cost of a satellite route, effective management while minimising the overhead traffic is critical. The transmission of IP packets is assumed and the real-time measurement of QoS parameters such as packet delay and loss emerged as the most important differences. A number of approaches to QoS measurement are feasible, however the use of trace packets is most promising especially for high network loads. An experiment compares the results from simulations, mathematical models and from a test network, using Poisson and self-similar traffic flows. The relationship between measurement accuracy and trace packet intensity is explored and the measurement response time to steps in traffic load is estimated. It is discovered that measurement accuracy improves as the queue load increases, in contrast to alternative approaches such as sampling of user packets. The response time to steps depends upon the degree of self-similarity and is generally longer than the times recommended by standards. A pragmatic approach to management of different modes is proposed where the measurement method is changed depending on the load

An assembly and offset assignment scheme for self-similar traffic in optical burst switching

Includes bibliographical references.Optical Burst Switching (OBS) is a viable technology for the next generation core network. We propose an FEC-assembly scheme that efficiently assembles self-similar traffic and a Pareto-offset assignment rather than a constant offset assignment. Two buffers, a packet buffer and a burst buffer, are implemented at the Label Edge Router (LER), buffering traffic in the electronic domain. The assembler, between the packet and burst buffers, is served by the packet queue while the assembler serves the burst queue. We outline advantages of why burst assembly cannot be implemented independent of offset assignment. The two schemes must be implemented in a complementary way if QoS is to be realized in an OBS network. We show that there is a direct relation between OBS network performance with burst assembly and offset assignment. We present simulation results of the assembly and offset assignment proposals using the ns2 network simulator. Our results show that the combination of the proposed FEC-Based assembly scheme with the proposed Pareto-offset assignment scheme give better network performance in terms of burst drop, resource contention and delay. Key to any traffic shaping is the nature traffic being shaped. This work also compares performance of both traditional exponential traffic with realistic Self-Similar traffic of Internet traffic on the proposed assembly and offset assignment schemes. In our simulations, we assume that all Label Switch Routers (LSR) have wavelength converters and are without optical buffers. We use Latest Available Unused Channel with Void Filling (LAUC-VF) scheduling scheme and use Just Enough Time (JET) reservation scheme

Resource dimensioning in a mixed traffic environment

An important goal of modern data networks is to support multiple applications over a single network infrastructure. The combination of data, voice, video and conference traffic, each requiring a unique Quality of Service (QoS), makes resource dimensioning a very challenging task. To guarantee QoS by mere over-provisioning of bandwidth is not viable in the long run, as network resources are expensive. The aim of proper resource dimensioning is to provide the required QoS while making optimal use of the allocated bandwidth. Dimensioning parameters used by service providers today are based on best practice recommendations, and are not necessarily optimal. This dissertation focuses on resource dimensioning for the DiffServ network architecture. Four predefined traffic classes, i.e. Real Time (RT), Interactive Business (IB), Bulk Business (BB) and General Data (GD), needed to be dimensioned in terms of bandwidth allocation and traffic regulation. To perform this task, a study was made of the DiffServ mechanism and the QoS requirements of each class. Traffic generators were required for each class to perform simulations. Our investigations show that the dominating Transport Layer protocol for the RT class is UDP, while TCP is mostly used by the other classes. This led to a separate analysis and requirement for traffic models for UDP and TCP traffic. Analysis of real-world data shows that modern network traffic is characterized by long-range dependency, self-similarity and a very bursty nature. Our evaluation of various traffic models indicates that the Multi-fractal Wavelet Model (MWM) is best for TCP due to its ability to capture long-range dependency and self-similarity. The Markov Modulated Poisson Process (MMPP) is able to model occasional long OFF-periods and burstiness present in UDP traffic. Hence, these two models were used in simulations. A test bed was implemented to evaluate performance of the four traffic classes defined in DiffServ. Traffic was sent through the test bed, while delay and loss was measured. For single class simulations, dimensioning values were obtained while conforming to the QoS specifications. Multi-class simulations investigated the effects of statistical multiplexing on the obtained values. Simulation results for various numerical provisioning factors (PF) were obtained. These factors are used to determine the link data rate as a function of the required average bandwidth and QoS. The use of class-based differentiation for QoS showed that strict delay and loss bounds can be guaranteed, even in the presence of very high (up to 90%) bandwidth utilization. Simulation results showed small deviations from best practice recommendation PF values: A value of 4 is currently used for both RT and IB classes, while 2 is used for the BB class. This dissertation indicates that 3.89 for RT, 3.81 for IB and 2.48 for BB achieve the prescribed QoS more accurately. It was concluded that either the bandwidth distribution among classes, or quality guarantees for the BB class should be adjusted since the RT and IB classes over-performed while BB under-performed. The results contribute to the process of resource dimensioning by adding value to dimensioning parameters through simulation rather than mere intuition or educated guessing.Dissertation (MEng (Electronic Engineering))--University of Pretoria, 2007.Electrical, Electronic and Computer Engineeringunrestricte

Multilayer optimization in radio resource allocation for the packet transmission in wireless networks

Doutoramento em Engenharia ElectrotécnicaNa última década tem-se assistido a um crescimento exponencial das redes de comunicações sem fios, nomeadamente no que se refere a taxa de penetração do serviço prestado e na implementação de novas infra-estruturas em todo o globo. É ponto assente neste momento que esta tendência irá não só continuar como se fortalecer devido à convergência que é esperada entre as redes móveis sem fio e a disponibilização de serviços de banda larga para a rede Internet fixa, numa evolução para um paradigma de uma arquitectura integrada e baseada em serviços e aplicações IP. Por este motivo, as comunicações móveis sem fios irão ter um papel fundamental no desenvolvimento da sociedade de informação a médio e longo prazos. A estratégia seguida no projecto e implementação das redes móveis celulares da actual geração (2G e 3G) foi a da estratificação da sua arquitectura protocolar numa estrutura modular em camadas estanques, onde cada camada do modelo é responsável pela implementação de um conjunto de funcionalidades. Neste modelo a comunicação dá-se apenas entre camadas adjacentes através de primitivas de comunicação pré-estabelecidas. Este modelo de arquitectura resulta numa mais fácil implementação e introdução de novas funcionalidades na rede. Entretanto, o facto das camadas inferiores do modelo protocolar não utilizarem informação disponibilizada pelas camadas superiores, e vice-versa acarreta uma degradação no desempenho do sistema. Este paradigma é particularmente importante quando sistemas de antenas múltiplas são implementados (sistemas MIMO). Sistemas de antenas múltiplas introduzem um grau adicional de liberdade no que respeita a atribuição de recursos rádio: o domínio espacial. Contrariamente a atribuição de recursos no domínio do tempo e da frequência, no domínio espacial os recursos rádio mapeados no domínio espacial não podem ser assumidos como sendo completamente ortogonais, devido a interferência resultante do facto de vários terminais transmitirem no mesmo canal e/ou slots temporais mas em feixes espaciais diferentes. Sendo assim, a disponibilidade de informação relativa ao estado dos recursos rádio às camadas superiores do modelo protocolar é de fundamental importância na satisfação dos critérios de qualidade de serviço exigidos. Uma forma eficiente de gestão dos recursos rádio exige a implementação de algoritmos de agendamento de pacotes de baixo grau de complexidade, que definem os níveis de prioridade no acesso a esses recursos por base dos utilizadores com base na informação disponibilizada quer pelas camadas inferiores quer pelas camadas superiores do modelo. Este novo paradigma de comunicação, designado por cross-layer resulta na maximização da capacidade de transporte de dados por parte do canal rádio móvel, bem como a satisfação dos requisitos de qualidade de serviço derivados a partir da camada de aplicação do modelo. Na sua elaboração, procurou-se que o standard IEEE 802.16e, conhecido por Mobile WiMAX respeitasse as especificações associadas aos sistemas móveis celulares de quarta geração. A arquitectura escalonável, o baixo custo de implementação e as elevadas taxas de transmissão de dados resultam num processo de multiplexagem de dados e valores baixos no atraso decorrente da transmissão de pacotes, os quais são atributos fundamentais para a disponibilização de serviços de banda larga. Da mesma forma a comunicação orientada à comutação de pacotes, inenente na camada de acesso ao meio, é totalmente compatível com as exigências em termos da qualidade de serviço dessas aplicações. Sendo assim, o Mobile WiMAX parece satisfazer os requisitos exigentes das redes móveis de quarta geração. Nesta tese procede-se à investigação, projecto e implementação de algoritmos de encaminhamento de pacotes tendo em vista a eficiente gestão do conjunto de recursos rádio nos domínios do tempo, frequência e espacial das redes móveis celulares, tendo como caso prático as redes móveis celulares suportadas no standard IEEE802.16e. Os algoritmos propostos combinam métricas provenientes da camada física bem como os requisitos de qualidade de serviço das camadas superiores, de acordo com a arquitectura de redes baseadas no paradigma do cross-layer. O desempenho desses algoritmos é analisado a partir de simulações efectuadas por um simulador de sistema, numa plataforma que implementa as camadas física e de acesso ao meio do standard IEEE802.16e.In the last decade mobile wireless communications have witnessed an explosive growth in the user’s penetration rate and their widespread deployment around the globe. It is expected that this tendency will continue to increase with the convergence of fixed Internet wired networks with mobile ones and with the evolution to the full IP architecture paradigm. Therefore mobile wireless communications will be of paramount importance on the development of the information society of the near future. In particular a research topic of particular relevance in telecommunications nowadays is related to the design and implementation of mobile communication systems of 4th generation. 4G networks will be characterized by the support of multiple radio access technologies in a core network fully compliant with the Internet Protocol (all IP paradigm). Such networks will sustain the stringent quality of service (QoS) requirements and the expected high data rates from the type of multimedia applications to be available in the near future. The approach followed in the design and implementation of the mobile wireless networks of current generation (2G and 3G) has been the stratification of the architecture into a communication protocol model composed by a set of layers, in which each one encompasses some set of functionalities. In such protocol layered model, communications is only allowed between adjacent layers and through specific interface service points. This modular concept eases the implementation of new functionalities as the behaviour of each layer in the protocol stack is not affected by the others. However, the fact that lower layers in the protocol stack model do not utilize information available from upper layers, and vice versa, downgrades the performance achieved. This is particularly relevant if multiple antenna systems, in a MIMO (Multiple Input Multiple Output) configuration, are implemented. MIMO schemes introduce another degree of freedom for radio resource allocation: the space domain. Contrary to the time and frequency domains, radio resources mapped into the spatial domain cannot be assumed as completely orthogonal, due to the amount of interference resulting from users transmitting in the same frequency sub-channel and/or time slots but in different spatial beams. Therefore, the availability of information regarding the state of radio resources, from lower to upper layers, is of fundamental importance in the prosecution of the levels of QoS expected from those multimedia applications. In order to match applications requirements and the constraints of the mobile radio channel, in the last few years researches have proposed a new paradigm for the layered architecture for communications: the cross-layer design framework. In a general way, the cross-layer design paradigm refers to a protocol design in which the dependence between protocol layers is actively exploited, by breaking out the stringent rules which restrict the communication only between adjacent layers in the original reference model, and allowing direct interaction among different layers of the stack. An efficient management of the set of available radio resources demand for the implementation of efficient and low complexity packet schedulers which prioritize user’s transmissions according to inputs provided from lower as well as upper layers in the protocol stack, fully compliant with the cross-layer design paradigm. Specifically, efficiently designed packet schedulers for 4G networks should result in the maximization of the capacity available, through the consideration of the limitations imposed by the mobile radio channel and comply with the set of QoS requirements from the application layer. IEEE 802.16e standard, also named as Mobile WiMAX, seems to comply with the specifications of 4G mobile networks. The scalable architecture, low cost implementation and high data throughput, enable efficient data multiplexing and low data latency, which are attributes essential to enable broadband data services. Also, the connection oriented approach of Its medium access layer is fully compliant with the quality of service demands from such applications. Therefore, Mobile WiMAX seems to be a promising 4G mobile wireless networks candidate. In this thesis it is proposed the investigation, design and implementation of packet scheduling algorithms for the efficient management of the set of available radio resources, in time, frequency and spatial domains of the Mobile WiMAX networks. The proposed algorithms combine input metrics from physical layer and QoS requirements from upper layers, according to the crosslayer design paradigm. Proposed schedulers are evaluated by means of system level simulations, conducted in a system level simulation platform implementing the physical and medium access control layers of the IEEE802.16e standard

Desempenho de QoS e mobilidade de sessões multicast em redes dinâmicasMes

Mestrado em Engenharia Electrónica e TelecomunicaçõesThe increasing demand in multimedia group services, contextawareness and seamless mobility implies strict requirements that cannot be satisfactorily addressed by the traditional transport control architectures for session content delivery. Moreover, context-aware networks introduce personalized concepts: any change in context can change the overall services and network environments, requiring the network and multicast sessions to be completely restructured in a very dynamic way. Regarding the complexity of maintaining scalability in context-aware networks, this Thesis has as main goal the development of an intelligent module, included in C-CAST architecture, capable of managing the entire network scheme. This mechanism depending on the scenario and the context of users and sources, and in cooperation with other network entities, must decide the most suitable network transport path in order to provide the best multiparty content delivery to the users, and manage the dynamicity of the network whenever changes occur. To perform its implementation, it was used an approach based in the interaction of different network components, exchanging context information between them. The intelligent module, using the updated network information, decides the better network connection to serve each user. In order to simulate the network behaviour in various situations, several scenarios were tested to evaluate its performance. The network is evaluated according to the several configured parameters, evaluating the improvements achieved in the network performance concerning different metrics, e.g. delay, lost packets ratio, overhead introduced by the architecture signalling. Through the implemented simulation setup, it is possible to conclude that the deployment of the solution proposed effectively provides an enhanced service to the users, distributing the multiparty content with QoS assurance using context information.O aumento da exigência em serviços de grupo, redes baseadas em contexto e mobilidade transparente implicam requisitos rígidos que não podem ser satisfeitos pelas arquitecturas tradicionais de controlo de transporte para entrega de conteúdos de sessão. Não obstante, redes baseadas em contexto introduzem conceitos personalizados: qualquer mudança no contexto pode mudar completamente os serviços e a própria rede, sendo necessário que a rede e as sessões multicast sejam completamente reestruturadas de uma forma dinâmica. Tendo em conta a complexidade de manter a escalabilidade em redes baseadas em contexto, esta Tese tem como principal objectivo o desenvolvimento de um módulo inteligente, que faz parte da arquitectura do projecto C-CAST, capaz de gerir toda a rede. Este mecanismo, dependendo do cenário da rede e do contexto dos utilizadores e das fontes, e em cooperação com outras entidades da rede, deve seleccionar a o caminho mais apropriado da rede de modo a fornecer da melhor forma o conteúdo aos utilizadores, e gerir a dinâmicidade da rede sempre que ocorrem mudanças. Para o implementar foi usada um método baseado na interacção de vários componentes, que trocam informação sobre contextos entre eles. O componente inteligente, usando informação actualizada da rede decide qual a melhor conexão da rede para servir cada utilizador. De forma a simular o comportamento da rede em várias situações, foram testados diversos cenários para avaliar a sua performance. A rede é avaliada de acordo com os vários parâmetros configurados, avaliando as melhorias conseguidas na performance da rede, por exemplo em termos de atrasos, rácio de pacotes perdidos e a carga imposta pelas mensagens de controlo da arquitectura. Através das simulações efectuadas é possível concluir que aplicando a arquitectura proposta, é fornecido de forma eficiente um serviço melhorado aos utilizadores, distribuindo o serviço de grupo com garantias de Qualidade de Serviço e usando informação de contexto

Journal of Telecommunications and Information Technology, 2011, nr 3

kwartalni

D2.1 Performance evaluation framework

This deliverable contains a proposal for a performance evaluation framework that aims at ensuring that multiple projects within 5G-PPP wireless strand can quantitatively assess and compare the performance of different 5G RAN design concepts. The report collects the vision of several 5G-PPP projects and is conceived as a living document to be further elaborated along with the 5G-PPP framework workshops planned during 2016.Weber, A.; Agyapong, P.; Rosowski, T.; Zimmerman, G.; Fallgren, M.; Sharma, S.; Kousaridas, A.... (2016). D2.1 Performance evaluation framework. https://doi.org/10.13140/RG.2.2.35447.2192

The Internet of Everything

In the era before IoT, the world wide web, internet, web 2.0 and social media made people’s lives comfortable by providing web services and enabling access personal data irrespective of their location. Further, to save time and improve efficiency, there is a need for machine to machine communication, automation, smart computing and ubiquitous access to personal devices. This need gave birth to the phenomenon of Internet of Things (IoT) and further to the concept of Internet of Everything (IoE)