dReDBox: Materializing a full-stack rack-scale system prototype of a next-generation disaggregated datacenter

Current datacenters are based on server machines, whose mainboard and hardware components form the baseline, monolithic building block that the rest of the system software, middleware and application stack are built upon. This leads to the following limitations: (a) resource proportionality of a multi-tray system is bounded by the basic building block (mainboard), (b) resource allocation to processes or virtual machines (VMs) is bounded by the available resources within the boundary of the mainboard, leading to spare resource fragmentation and inefficiencies, and (c) upgrades must be applied to each and every server even when only a specific component needs to be upgraded. The dRedBox project (Disaggregated Recursive Datacentre-in-a-Box) addresses the above limitations, and proposes the next generation, low-power, across form-factor datacenters, departing from the paradigm of the mainboard-as-a-unit and enabling the creation of function-block-as-a-unit. Hardware-level disaggregation and software-defined wiring of resources is supported by a full-fledged Type-1 hypervisor that can execute commodity virtual machines, which communicate over a low-latency and high-throughput software-defined optical network. To evaluate its novel approach, dRedBox will demonstrate application execution in the domains of network functions virtualization, infrastructure analytics, and real-time video surveillance.This work has been supported in part by EU H2020 ICTproject dRedBox, contract #687632.Peer ReviewedPostprint (author's final draft

Reconfiguration in an Optical Multiring Interconnection Network - Masters Thesis, December 2002

The advent of optical technology that can feasibly support extremely high bandwidth chip-to-chip communication raises a host of architectural questions in the design of digital systems. Terabit per second (and higher) bandwidths have not been previously available at the chip level. In this thesis, we examine the use of this technology in two different scenarios, viz., as the interconnection network in a multiprocessor system and as a switch fabric in network routers. Specifically, we examine the performance gains associated with utilizing the bandwidth reconfiguration capabilities of a system based on this technology

Benchmarking and viability assessment of optical packet switching for metro networks

Optical packet switching (OPS) has been proposed as a strong candidate for future metro networks. This paper assesses the viability of an OPS-based ring architecture as proposed within the research project DAVID (Data And Voice Integration on DWDM), funded by the European Commission through the Information Society Technologies (IST) framework. Its feasibility is discussed from a physical-layer point of view, and its limitations in size are explored. Through dimensioning studies, we show that the proposed OPS architecture is competitive with respect to alternative metropolitan area network (MAN) approaches, including synchronous digital hierarchy, resilient packet rings (RPR), and star-based Ethernet. Finally, the proposed OPS architectures are discussed from a logical performance point of view, and a high-quality scheduling algorithm to control the packet-switching operations in the rings is explained

PERFORMANCE ASSESSMENT OF SCHEDULERS IN OPTICAL INTERCONNECTION NETWORKS

With ever-increasing demand for high-performance computing systems, interconnection networks, serving as the communication links in multicore architectures have become a key element for guaranteeing the system performance. Compared with bandwidth-limited power hungry electrical interconnection networks, optical integrated interconnection networks also referred to as networks-on-chip (ONoC) architectures are emerging as a promising alternative to enable future computing performance. In ONoC architectures, scheduling algorithms are necessary for avoiding packet collisions while achieving high throughput, low latency, and good fairness. Scheduling algorithms exist for non-blocking electrical NoC. These algorithms can be applied to ONoC, while accounting for additional constraints arising from optical component limitations. In this thesis various scheduling algorithms are simulated, With the objective of comparing their latency and throughput using C + + programming language for ONoC with bus and ring topologies. An optimal scheduler based on two-step scheduling (TSS) technique is proposed. The optimal TSS models the scheduling problem in two steps for ONoC. The first step is the matching step which is done by representing each node pair as input bipartite graph then matching takes place between the input and output ports. The second step performs the wavelength assignment between each paired node while avoiding collisions and also with the consideration of wavelength continuity. The two-step approach with the iSLIP and MWM algorithms are considered. The proposed optimal TSS is simulated and its performances are evaluated. The optimal scheduler with maximum weighted matching (MWM) scheduling policy achieves better results in comparison to iSLIP scheduling policy based on queue length under any packet arrival process. The optimal MWM scheduling policy achieved better performance for both bus and ring topologies. The main result is that unidirectional ring topology outperforms the bus topology for any number of wavelengths less or equal to the number of ONoC port, even if the average path length is longer. The reason is that in the bus topology half of the wavelengths are allocated in each direction, fixing the maximum number of packets in each direction using two transceivers per node can compensate this issue, reaching to better performance than the ring

Scalable parallel communications

Coarse-grain parallelism in networking (that is, the use of multiple protocol processors running replicated software sending over several physical channels) can be used to provide gigabit communications for a single application. Since parallel network performance is highly dependent on real issues such as hardware properties (e.g., memory speeds and cache hit rates), operating system overhead (e.g., interrupt handling), and protocol performance (e.g., effect of timeouts), we have performed detailed simulations studies of both a bus-based multiprocessor workstation node (based on the Sun Galaxy MP multiprocessor) and a distributed-memory parallel computer node (based on the Touchstone DELTA) to evaluate the behavior of coarse-grain parallelism. Our results indicate: (1) coarse-grain parallelism can deliver multiple 100 Mbps with currently available hardware platforms and existing networking protocols (such as Transmission Control Protocol/Internet Protocol (TCP/IP) and parallel Fiber Distributed Data Interface (FDDI) rings); (2) scale-up is near linear in n, the number of protocol processors, and channels (for small n and up to a few hundred Mbps); and (3) since these results are based on existing hardware without specialized devices (except perhaps for some simple modifications of the FDDI boards), this is a low cost solution to providing multiple 100 Mbps on current machines. In addition, from both the performance analysis and the properties of these architectures, we conclude: (1) multiple processors providing identical services and the use of space division multiplexing for the physical channels can provide better reliability than monolithic approaches (it also provides graceful degradation and low-cost load balancing); (2) coarse-grain parallelism supports running several transport protocols in parallel to provide different types of service (for example, one TCP handles small messages for many users, other TCP's running in parallel provide high bandwidth service to a single application); and (3) coarse grain parallelism will be able to incorporate many future improvements from related work (e.g., reduced data movement, fast TCP, fine-grain parallelism) also with near linear speed-ups

Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure

This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version

Crosstalk-Preventing Scheduling in AWG-Based Cell Switches

Best paper awar