Forward error correction in optical ethernet communications

[ANGLÈS] A way of incrementing the amount of information sent through an optical fibre is ud-WDM (ultra dense – Wavelength Division Multiplexing). The problem is that the sensitivity of the receiver requires certain SNR (Signal Noise Ratio) that are only achieved in low distances, so to increase them a codification called FEC (Forward Error Correction) can be used. This should reduce the BER (Bit Error Rate) at the receiver letting the signal to be transmitted to longer distances. Another problem that has to be faced is that due to the phase noise of the lasers, there are BER floors that cannot be reduced incrementing the SNR so that makes the use of the FEC even more interesting. Moreover, Ethernet also does another codification called 8b/10b and this one has to be combined with the FEC. This project tests different models of encoding the signals to try to reach the one that is the most useful.[CASTELLÀ] Un modo de incrementar la información que se puede enviar a través de una fibra óptica es usando ud-WDM (ultra denso – multiplexado por división de longitud de onda). El problema es que debido a limitaciones en la sensibilidad del receptor se requieren SNR (Relación de Señal a Ruido) solo conseguibles a cortas distancias, y con tal de incrementarla se puede usar una codificación llamada FEC (Corrección de Errores a Posteriori). Esto debería permitir reducir la BER (cantidad de bits erróneos) al receptor permitiendo así la posibilidad de transmitir la señal a distancias más largas. Otro problema que resolver es que debido a ruido de fase de los láseres aparecen limites de BER que no pueden ser reducidos aunque se incremente la SNR, lo cual hace aún mas interesante la FEC. Además, Ethernet hace otra codificación llamada 8b/10b que tiene que ser combinada con la FEC. Este proyecto prueba distintos modelos con el objetivo de conocer el sistema más óptimo.[CATALÀ] Una manera d’incrementar la informació que es pot enviar per fibra òptica és la ud-WDM (ultra dens – multiplexat per divisió de longitud d’ona). El problema és que degut a la limitada sensibilitat dels receptors es requereix una SNR (Relació Senyal a Soroll) que nomes es pot obtenir a curtes distancies, i per tal d’incrementar-la es pot usar una codificació anomenada FEC (Correcció d’Errors a Posterior). Això hauria de permetre reduir la BER (quantitat de bits erronis) al receptor permetent la possibilitat de transmetre el senyal a més llargues distàncies. Un altre problema que ens hem d’enfrontar és a que degut al soroll de fase dels làsers hi ha BER mínims que no es poden reduir incrementant la SNR, el qual fa l’ús del FEC encara més interessant. A més a més, Ethernet fa una altre codificació anomenada 8b/10b i ha de ser combinada amb la FEC. Aquest projecte prova diferents models per tal de trobar el que sigui més òptim

Topological Design of Multiple Virtual Private Networks UTILIZING SINK-TREE PATHS

With the deployment of MultiProtocol Label Switching (MPLS) over a core backbone networks, it is possible for a service provider to built Virtual Private Networks (VPNs) supporting various classes of services with QoS guarantees. Efficiently mapping the logical layout of multiple VPNs over a service provider network is a challenging traffic engineering problem. The use of sink-tree (multipoint-to-point) routing paths in a MPLS network makes the VPN design problem different from traditional design approaches where a full-mesh of point-to-point paths is often the choice. The clear benefits of using sink-tree paths are the reduction in the number of label switch paths and bandwidth savings due to larger granularities of bandwidth aggregation within the network. In this thesis, the design of multiple VPNs over a MPLS-like infrastructure network, using sink-tree routing, is formulated as a mixed integer programming problem to simultaneously find a set of VPN logical topologies and their dimensions to carry multi-service, multi-hour traffic from various customers. Such a problem formulation yields a NP-hard complexity. A heuristic path selection algorithm is proposed here to scale the VPN design problem by choosing a small-but-good candidate set of feasible sink-tree paths over which the optimal routes and capacity assignments are determined. The proposed heuristic has clearly shown to speed up the optimization process and the solution can be obtained within a reasonable time for a realistic-size network. Nevertheless, when a large number of VPNs are being layout simultaneously, a standard optimization approach has a limited scalability. Here, the heuristics termed the Minimum-Capacity Sink-Tree Assignment (MCSTA) algorithm proposed to approximate the optimal bandwidth and sink-tree route assignment for multiple VPNs within a polynomial computational time. Numerical results demonstrate the MCSTA algorithm yields a good solution within a small error and sometimes yields the exact solution. Lastly, the proposed VPN design models and solution algorithms are extended for multipoint traffic demand including multipoint-to-point and broadcasting connections

Towards a cloud enabler : from an optical network resource provisioning system to a generalized architecture for dynamic infrastructure services provisioning

This work was developed during a period where most of the optical management and provisioning system where manual and proprietary. This work contributed to the evolution of the state of the art of optical networks with new architectures and advanced virtual infrastructure services. The evolution of optical networks, and internet globally, have been very promising during the last decade. The impact of mobile technology, grid, cloud computing, HDTV, augmented reality and big data, among many others, have driven the evolution of optical networks towards current service technologies, mostly based on SDN (Software Defined Networking) architectures and NFV(Network Functions Virtualisation). Moreover, the convergence of IP/Optical networks and IT services, and the evolution of the internet and optical infrastructures, have generated novel service orchestrators and open source frameworks. In fact, technology has evolved that fast that none could foresee how important Internet is for our current lives. Said in other words, technology was forced to evolve in a way that network architectures became much more transparent, dynamic and flexible to the end users (applications, user interfaces or simple APIs). This Thesis exposes the work done on defining new architectures for Service Oriented Networks and the contribution to the state of the art. The research work is divided into three topics. It describes the evolution from a Network Resource Provisioning System to an advanced Service Plane, and ends with a new architecture that virtualized the optical infrastructure in order to provide coordinated, on-demand and dynamic services between the application and the network infrastructure layer, becoming an enabler for the new generation of cloud network infrastructures. The work done on defining a Network Resource Provisioning System established the first bases for future work on network infrastructure virtualization. The UCLP (User Light Path Provisioning) technology was the first attempt for Customer Empowered Networks and Articulated Private Networks. It empowered the users and brought virtualization and partitioning functionalities into the optical data plane, with new interfaces for dynamic service provisioning. The work done within the development of a new Service Plane allowed the provisioning of on-demand connectivity services from the application, and in a multi-domain and multi-technology scenario based on a virtual network infrastructure composed of resources from different infrastructure providers. This Service Plane facilitated the deployment of applications consuming large amounts of data under deterministic conditions, so allowing the networks behave as a Grid-class resource. It became the first on-demand provisioning system that at lower levels allowed the creation of one virtual domain composed from resources of different providers. The last research topic presents an architecture that consolidated the work done in virtualisation while enhancing the capabilities to upper layers, so fully integrating the optical network infrastructure into the cloud environment, and so providing an architecture that enabled cloud services by integrating the request of optical network and IT infrastructure services together at the same level. It set up a new trend into the research community and evolved towards the technology we use today based on SDN and NFV. Summing up, the work presented is focused on the provisioning of virtual infrastructures from the architectural point of view of optical networks and IT infrastructures, together with the design and definition of novel service layers. It means, architectures that enabled the creation of virtual infrastructures composed of optical networks and IT resources, isolated and provisioned on-demand and in advance with infrastructure re-planning functionalities, and a new set of interfaces to open up those services to applications or third parties.Aquesta tesi es va desenvolupar durant un període on la majoria de sistemes de gestió de xarxa òptica eren manuals i basats en sistemes propietaris. En aquest sentit, la feina presentada va contribuir a l'evolució de l'estat de l'art de les xarxes òptiques tant a nivell d’arquitectures com de provisió d’infraestructures virtuals. L'evolució de les xarxes òptiques, i d'Internet a nivell mundial, han estat molt prometedores durant l'última dècada. L'impacte de la tecnologia mòbil, la computació al núvol, la televisió d'alta definició, la realitat augmentada i el big data, entre molts altres, han impulsat l'evolució cap a xarxes d’altes prestacions amb nous serveis basats en SDN (Software Defined Networking) i NFV (Funcions de xarxa La virtualització). D'altra banda, la convergència de xarxes òptiques i els serveis IT, junt amb l'evolució d'Internet i de les infraestructures òptiques, han generat nous orquestradors de serveis i frameworks basats en codi obert. La tecnologia ha evolucionat a una velocitat on ningú podria haver predit la importància que Internet està tenint en el nostre dia a dia. Dit en altres paraules, la tecnologia es va veure obligada a evolucionar d'una manera on les arquitectures de xarxa es fessin més transparent, dinàmiques i flexibles vers als usuaris finals (aplicacions, interfícies d'usuari o APIs simples). Aquesta Tesi presenta noves arquitectures de xarxa òptica orientades a serveis. El treball de recerca es divideix en tres temes. Es presenta un sistema de virtualització i aprovisionament de recursos de xarxa i la seva evolució a un pla de servei avançat, per acabar presentant el disseny d’una nova arquitectura capaç de virtualitzar la infraestructura òptica i IT i proporcionar serveis de forma coordinada, i sota demanda, entre l'aplicació i la capa d'infraestructura de xarxa òptica. Tot esdevenint un facilitador per a la nova generació d'infraestructures de xarxa en el núvol. El treball realitzat en la definició del sistema de virtualització de recursos va establir les primeres bases sobre la virtualització de la infraestructura de xarxa òptica en el marc de les “Customer Empowered Networks” i “Articulated Private Networks”. Amb l’objectiu de virtualitzar el pla de dades òptic, i oferir noves interfícies per a la provisió de serveis dinàmics de xarxa. En quant al pla de serveis presentat, aquest va facilitat la provisió de serveis de connectivitat sota demanda per part de l'aplicació, tant en entorns multi-domini, com en entorns amb múltiples tecnologies. Aquest pla de servei, anomenat Harmony, va facilitar el desplegament de noves aplicacions que consumien grans quantitats de dades en condicions deterministes. En aquest sentit, va permetre que les xarxes es comportessin com un recurs Grid, i per tant, va esdevenir el primer sistema d'aprovisionament sota demanda que permetia la creació de dominis virtuals de xarxa composts a partir de recursos de diferents proveïdors. Finalment, es presenta l’evolució d’un pla de servei cap una arquitectura global que consolida el treball realitzat a nivell de convergència d’infraestructures (òptica + IT) i millora les capacitats de les capes superiors. Aquesta arquitectura va facilitar la plena integració de la infraestructura de xarxa òptica a l'entorn del núvol. En aquest sentit, aquest resultats van evolucionar cap a les tendències actuals de SDN i NFV. En resum, el treball presentat es centra en la provisió d'infraestructures virtuals des del punt de vista d’arquitectures de xarxa òptiques i les infraestructures IT, juntament amb el disseny i definició de nous serveis de xarxa avançats, tal i com ho va ser el servei de re-planificació dinàmicaPostprint (published version

Cross-Layer Platform for Dynamic, Energy-Efficient Optical Networks

The design of the next-generation Internet infrastructure is driven by the need to sustain the massive growth in bandwidth demands. Novel, energy-efficient, optical networking technologies and architectures are required to effectively meet the stringent performance requirements with low cost and ultrahigh energy efficiencies. In this thesis, a cross-layer communications platform is proposed to enable greater intelligence and functionality on the physical layer. Providing the optical layer with advanced networking capabilities will facilitate the dynamic management and optimization of optical switching based on performance monitoring measurements and higher-layer attributes. The cross-layer platform aims to create a new framework for networks to incorporate packet-scale measurement subsystems and techniques for monitoring the health of the optical channel. This will allow for quality-of-service- and energy-aware routing schemes, as well as an enhanced awareness of the optical data signals. This thesis first presents the design and development of an optical packet switching fabric. Leveraging a networking test-bed environment to validate networking hypotheses, advanced switching functionalities are demonstrated, including the support for quality-of-service based routing and packet multicasting. The investigated cross-layering is based on emerging optical technologies, enabling packet protection techniques and packet-rate switching fabric reconfiguration. Coupled with fast performance monitoring, the platform will achieve significant performance gains within the endeavor of all-optical switching. Allowing for a more intelligent, programmable optical layer aims to support greater flexibility with respect to bandwidth allocation and potentially a significant reduction in the network's energy consumption. The ultimate deliverable of this work is a high-performance, cross-layer enabled optical network node. The experimental demonstration of an initial prototype creates a dynamic network element with distributed control plane management, featuring fast packet-rate optical switching capabilities and embedded physical-layer performance monitoring modules. The cross-layer box enables an intelligent traffic delivery system that can dynamically manipulate optical switching on a packet-granular scale. With the goal of achieving advanced multi-layer routing and control algorithms, the network node requires an intelligent co-optimization across all the layers. The proposed cross-layer design should drive optical technologies and architectures in an innovative way, in order to fulfill the void between the design of basic photonic devices and the networking protocols that use them. The performance of the entire network -- from the optical components, to the routing algorithms and user applications -- should be optimized in concert. This contribution to the area of cross-layer network design creates an adaptable optical pipe that is extremely flexible and intelligent aware of both the physical optical signals and higher-layer requirements. The impact of this work will be seen in the realization of dynamic, energy-efficient optical communication links in future networking infrastructures

Journal of Telecommunications and Information Technology, 2004, nr 2

kwartalni

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201