385 research outputs found
Development of a model for sEMG based joint-torque estimation using Swarm techniques
© 2016 IEEE. Over the years, numerous researchers have explored the relationship between surface electromyography (sEMG) signal with joint torque that would be useful to develop a suitable controller for rehabilitation robot. This research focuses on the transformation of sEMG signal by adopting a mathematical model to find the estimated joint torque of knee extension. Swarm techniques such as Particle Swarm Optimization (PSO) and Improved Particle Swarm Optimization (IPSO) were adapted to optimize the mathematical model for estimated joint torque. The correlation between the estimated joint torque and actual joint torque were determined by Coefficient of Determination (R2) and fitness value of Sum Squared Error (SSE). The outcome of the research shows that both the PSO and IPSO have yielded promising results
Recommended from our members
Intuitive Human-Machine Interfaces for Non-Anthropomorphic Robotic Hands
As robots become more prevalent in our everyday lives, both in our workplaces and in our homes, it becomes increasingly likely that people who are not experts in robotics will be asked to interface with robotic devices. It is therefore important to develop robotic controls that are intuitive and easy for novices to use. Robotic hands, in particular, are very useful, but their high dimensionality makes creating intuitive human-machine interfaces for them complex. In this dissertation, we study the control of non-anthropomorphic robotic hands by non-roboticists in two contexts: collaborative manipulation and assistive robotics.
In the field of collaborative manipulation, the human and the robot work side by side as independent agents. Teleoperation allows the human to assist the robot when autonomous grasping is not able to deal sufficiently well with corner cases or cannot operate fast enough. Using the teleoperator’s hand as an input device can provide an intuitive control method, but finding a mapping between a human hand and a non-anthropomorphic robot hand can be difficult, due to the hands’ dissimilar kinematics. In this dissertation, we seek to create a mapping between the human hand and a fully actuated, non-anthropomorphic robot hand that is intuitive enough to enable effective real-time teleoperation, even for novice users.
We propose a low-dimensional and continuous teleoperation subspace which can be used as an intermediary for mapping between different hand pose spaces. We first propose the general concept of the subspace, its properties and the variables needed to map from the human hand to a robot hand. We then propose three ways to populate the teleoperation subspace mapping. Two of our mappings use a dataglove to harvest information about the user's hand. We define the mapping between joint space and teleoperation subspace with an empirical definition, which requires a person to define hand motions in an intuitive, hand-specific way, and with an algorithmic definition, which is kinematically independent, and uses objects to define the subspace. Our third mapping for the teleoperation subspace uses forearm electromyography (EMG) as a control input.
Assistive orthotics is another area of robotics where human-machine interfaces are critical, since, in this field, the robot is attached to the hand of the human user. In this case, the goal is for the robot to assist the human with movements they would not otherwise be able to achieve. Orthotics can improve the quality of life of people who do not have full use of their hands. Human-machine interfaces for assistive hand orthotics that use EMG signals from the affected forearm as input are intuitive and repeated use can strengthen the muscles of the user's affected arm. In this dissertation, we seek to create an EMG based control for an orthotic device used by people who have had a stroke. We would like our control to enable functional motions when used in conjunction with a orthosis and to be robust to changes in the input signal.
We propose a control for a wearable hand orthosis which uses an easy to don, commodity forearm EMG band. We develop an supervised algorithm to detect a user’s intent to open and close their hand, and pair this algorithm with a training protocol which makes our intent detection robust to changes in the input signal. We show that this algorithm, when used in conjunction with an orthosis over several weeks, can improve distal function in users. Additionally, we propose two semi-supervised intent detection algorithms designed to keep our control robust to changes in the input data while reducing the length and frequency of our training protocol
Gesture Recognition and Control for Semi-Autonomous Robotic Assistant Surgeons
The next stage for robotics development is to introduce autonomy and cooperation with human agents in tasks that require high levels of precision and/or that exert considerable physical strain. To guarantee the highest possible safety standards, the best approach is to devise a deterministic automaton that performs identically for each operation. Clearly, such approach inevitably fails to adapt itself to changing environments or different human companions. In a surgical scenario, the highest variability happens for the timing of different actions performed within the same phases. This thesis explores the solutions adopted in pursuing automation in robotic minimally-invasive surgeries (R-MIS) and presents a novel cognitive control architecture that uses a multi-modal neural network trained on a cooperative task performed by human surgeons and produces an action segmentation that provides the required timing for actions while maintaining full phase execution control via a deterministic Supervisory Controller and full execution safety by a velocity-constrained Model-Predictive Controller
On Neuromechanical Approaches for the Study of Biological Grasp and Manipulation
Biological and robotic grasp and manipulation are undeniably similar at the
level of mechanical task performance. However, their underlying fundamental
biological vs. engineering mechanisms are, by definition, dramatically
different and can even be antithetical. Even our approach to each is
diametrically opposite: inductive science for the study of biological systems
vs. engineering synthesis for the design and construction of robotic systems.
The past 20 years have seen several conceptual advances in both fields and the
quest to unify them. Chief among them is the reluctant recognition that their
underlying fundamental mechanisms may actually share limited common ground,
while exhibiting many fundamental differences. This recognition is particularly
liberating because it allows us to resolve and move beyond multiple paradoxes
and contradictions that arose from the initial reasonable assumption of a large
common ground. Here, we begin by introducing the perspective of neuromechanics,
which emphasizes that real-world behavior emerges from the intimate
interactions among the physical structure of the system, the mechanical
requirements of a task, the feasible neural control actions to produce it, and
the ability of the neuromuscular system to adapt through interactions with the
environment. This allows us to articulate a succinct overview of a few salient
conceptual paradoxes and contradictions regarding under-determined vs.
over-determined mechanics, under- vs. over-actuated control, prescribed vs.
emergent function, learning vs. implementation vs. adaptation, prescriptive vs.
descriptive synergies, and optimal vs. habitual performance. We conclude by
presenting open questions and suggesting directions for future research. We
hope this frank assessment of the state-of-the-art will encourage and guide
these communities to continue to interact and make progress in these important
areas
Data-Driven Transducer Design and Identification for Internally-Paced Motor Brain Computer Interfaces: A Review
Brain-Computer Interfaces (BCIs) are systems that establish a direct communication pathway between the users' brain activity and external effectors. They offer the potential to improve the quality of life of motor-impaired patients. Motor BCIs aim to permit severely motor-impaired users to regain limb mobility by controlling orthoses or prostheses. In particular, motor BCI systems benefit patients if the decoded actions reflect the users' intentions with an accuracy that enables them to efficiently interact with their environment. One of the main challenges of BCI systems is to adapt the BCI's signal translation blocks to the user to reach a high decoding accuracy. This paper will review the literature of data-driven and user-specific transducer design and identification approaches and it focuses on internally-paced motor BCIs. In particular, continuous kinematic biomimetic and mental-task decoders are reviewed. Furthermore, static and dynamic decoding approaches, linear and non-linear decoding, offline and real-time identification algorithms are considered. The current progress and challenges related to the design of clinical-compatible motor BCI transducers are additionally discussed
Neuromechanical Biomarkers for Robotic Neurorehabilitation
: One of the current challenges for translational rehabilitation research is to develop the strategies to deliver accurate evaluation, prediction, patient selection, and decision-making in the clinical practice. In this regard, the robot-assisted interventions have gained popularity as they can provide the objective and quantifiable assessment of the motor performance by taking the kinematics parameters into the account. Neurophysiological parameters have also been proposed for this purpose due to the novel advances in the non-invasive signal processing techniques. In addition, other parameters linked to the motor learning and brain plasticity occurring during the rehabilitation have been explored, looking for a more holistic rehabilitation approach. However, the majority of the research done in this area is still exploratory. These parameters have shown the capability to become the "biomarkers" that are defined as the quantifiable indicators of the physiological/pathological processes and the responses to the therapeutical interventions. In this view, they could be finally used for enhancing the robot-assisted treatments. While the research on the biomarkers has been growing in the last years, there is a current need for a better comprehension and quantification of the neuromechanical processes involved in the rehabilitation. In particular, there is a lack of operationalization of the potential neuromechanical biomarkers into the clinical algorithms. In this scenario, a new framework called the "Rehabilomics" has been proposed to account for the rehabilitation research that exploits the biomarkers in its design. This study provides an overview of the state-of-the-art of the biomarkers related to the robotic neurorehabilitation, focusing on the translational studies, and underlying the need to create the comprehensive approaches that have the potential to take the research on the biomarkers into the clinical practice. We then summarize some promising biomarkers that are being under investigation in the current literature and provide some examples of their current and/or potential applications in the neurorehabilitation. Finally, we outline the main challenges and future directions in the field, briefly discussing their potential evolution and prospective
- …