On improving 5G internet of radio light security based on led fingerprint identification method

Copyright: © 2021 by the authors. In this paper, a novel device identification method is proposed to improve the security of Visible Light Communication (VLC) in 5G networks. This method extracts the fingerprints of Light-Emitting Diodes (LEDs) to identify the devices accessing the 5G network. The extraction and identification mechanisms have been investigated from the theoretical perspective as well as verified experimentally. Moreover, a demonstration in a practical indoor VLC-based 5G network has been carried out to evaluate the feasibility and accuracy of this approach. The fingerprints of four identical white LEDs were extracted successfully from the received 5G NR (New Radio) signals. To perform identification, four types of machine-learning-based classifiers were employed and the resulting accuracy was up to 97.1%.EU Horizon 2020 program towards the Internet of Radio-Light project H2020-ICT 761992

Design, analysis and optimization of visible light communications based indoor access systems for mobile and internet of things applications

Demands for indoor broadband wireless access services are expected to outstrip the spectrum capacity in the near-term spectrum crunch . Deploying additional femtocells to address spectrum crunch is cost-inefficient due to the backhaul challenge and the exorbitant system maintenance. According to an Alcatel-Lucent report, most mobile Internet access traffic happens indoors. To alleviate the spectrum crunch and the backhaul challenge problems, visible light communication (VLC) emerges as an attractive candidate for indoor wireless access in the 5G architecture. In particular, VLC utilizes LED or fluorescent lamps to send out imperceptible flickering light that can be captured by a smart phone camera or photodetector. Leveraging power line communication and the available indoor infrastructure, VLC can be utilized with a small one-time cost. VLC also facilitates the great advantage of being able to jointly perform illumination and communications. Integration of VLC into the existing indoor wireless access networks embraces many challenges, such as lack of uplink infrastructure, excessive delay caused by blockage in heterogeneous networks, and overhead of power consumption. In addition, applying VLC to Internet-of-Things (IoT) applications, such as communication and localization, faces the challenges including ultra-low power requirement, limited modulation bandwidth, and heavy computation and sensing at the device end. In this dissertation, to overcome the challenges of VLC, a VLC enhanced WiFi system is designed by incorporating VLC downlink and WiFi uplink to connect mobile devices to the Internet. To further enhance robustness and throughput, WiFi and VLC are aggregated in parallel by leveraging the bonding technique in Linux operating system. Based on dynamic resource allocation, the delay performance of heterogeneous RF-VLC network is analyzed and evaluated for two different configurations - aggregation and non-aggregation. To mitigate the power consumption overhead of VLC, a problem of minimizing the total power consumption of a general multi-user VLC indoor network while satisfying users traffic demands and maintaining an acceptable level of illumination is formulated. The optimization problem is solved by the efficient column generation algorithm. With ultra-low power consumption, VLC backscatter harvests energy from indoor light sources and transmits optical signals by modulating the reflected light from a reflector. A novel pixelated VLC backscatter is proposed and prototyped to address the limited modulation bandwidth by enabling more advanced modulation scheme than the state-of-the-art on-off keying (OOK) scheme and allowing for the first time orthogonal multiple access. VLC-based indoor access system is also suitable for indoor localization due to its unique properties, such as utilization of existing ubiquitous lighting infrastructure, high location and orientation accuracy, and no interruption to RF-based devices. A novel retroreflector-based visible light localization system is proposed and prototyped to establish an almost zero-delay backward channel using a retroreflector to reflect light back to its source. This system can localize passive IoT devices without requiring computation and heavy sensing (e.g., camera) at the device end

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed

Contextually and identity aware 5G services

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University LondonThe fifth generation (5G) mobile networks aim to be ten times faster than the existing 4G connection, whilst providing low latency, and flexibility. Hence, various alterations are planned to the existing network infrastructure to be able to reach the 5G expected performance levels. The main technologies that were used, to ensure high performance, flexible network, and efficient resource allocation, are Software Defined Network and Network Function Virtualization. As these technologies are replacing the device-based architecture with, a service-based architecture. This thesis provides a design of location database interactive web interface and interactive mobile application. The implementation of real time video streaming location server, the streaming system's performance parameters demonstrated a high level of QoS (0.07ms jitter and 9.53ms delay). In regard to experimental examination, it measured the localisation coverage, accuracy measurements and a highly scalable security solution. The localisation coverage and accuracy measurements were achieved through the mmWave and VLC link transmitters. The proposed simulated annealing algorithm aimed at data optimisation for location measurements accuracy showed results of the average location error of x and y which showed significant improvement from x= 22.5 and y=21.6 to x=11.09 and y= 11.63. The proposed indoor location security solution showed significant results, as it provides a high scalability solution using the VNF. The solution showed that it was not 100% effective, as some of the fake discover packets still reached the DHCP server. This was due to the high load of traffic passing through the network. Nonetheless, 90% of the fake DHCP discover packets never reached the DHCP server because the scripts began blocking all fake discover packets after realising it was an attack. This conveys that the proposed system was able to run successfully without crashing or overloading the controller. Overall, the main challenges facing 5G have been addressed with their proposed solutions, which showed promising results. Conclusively showing that there is a lot more space for technological advancements to support the future of mobile networks.European Union’s Horizon 2020 research program - the Internet of Radio-Light (IoRL) project H2020-ICT 761992

Introduction to indoor networking concepts and challenges in LiFi

LiFi is networked, bidirectional wireless communication with light. It is used to connect fixed and mobile devices at very high data rates by harnessing the visible light and infrared spectrum. Combined, these spectral resources are 2600 times larger than the entire radio frequency (RF) spectrum. This paper provides the motivation behind why LiFi is a very timely technology, especially for 6th generation (6G) cellular communications. It discusses and reviews essential networking technologies, such as interference mitigation and hybrid LiFi/Wi-Fi networking topologies. We also consider the seamless integration of LiFi into existing wireless networks to form heterogeneous networks across the optical and RF domains and discuss implications and solutions in terms of load balancing. Finally, we provide the results of a real-world hybrid LiFi/Wi-Fi network deployment in a software defined networking testbed. In addition, results from a LiFi deployment in a school classroom are provided, which show that Wi-Fi network performance can be improved significantly by offloading traffic to the LiFi