607 research outputs found
Will TCP work in mmWave 5G Cellular Networks?
The vast available spectrum in the millimeter wave (mmWave) bands offers the
possibility of multi-Gbps data rates for fifth generation (5G) cellular
networks. However, mmWave capacity can be highly intermittent due to the
vulnerability of mmWave signals to blockages and delays in directional
searching. Such highly variable links present unique challenges for adaptive
control mechanisms in transport layer protocols and end-to-end applications.
This paper considers the fundamental question of whether TCP - the most widely
used transport protocol - will work in mmWave cellular systems. The paper
provides a comprehensive simulation study of TCP considering various factors
such as the congestion control algorithm, including the recently proposed TCP
BBR, edge vs. remote servers, handover and multi- connectivity, TCP packet size
and 3GPP-stack parameters. We show that the performance of TCP on mmWave links
is highly dependent on different combinations of these parameters, and identify
the open challenges in this area.Comment: 7 pages, 4 figures, 2 tables. To be published in the IEEE
Communication Magazin
Recommended from our members
A Framework for Multiaccess Support for Unreliable Internet Traffic using Multipath DCCP
Mobile nodes are typically equipped with multiple radios and can connect to multiple radio access networks (e.g. WiFi, LTE and 5G). Consequently, it is important to design mechanisms that efficiently manage multiple network interfaces for aggregating the capacity, steering of traffic flows or switching flows among multiple interfaces. While such multi-access solutions have the potential to increase the overall traffic throughput and communication reliability, the variable latencies on different access links introduce packet delay variation which has negative effect on the application quality of service and user quality of experience. In this paper, we present a new IP-compatible multipath framework for heterogeneous access networks. The framework uses Multipath Datagram Congestion Control Protocol (MP-DCCP) - a set of extensions to regular DCCP - to enable a transport connection to operate across multiple access networks, simultaneously. We present the design of the new protocol framework and show simulation and experimental testbed results that (1) demonstrate the operation of the new framework, and (2) demonstrate the ability of our solution to manage significant packet delay variation caused by the asymmetry of network paths, by applying pluggable packet scheduling or reordering algorithms
A novel multipath-transmission supported software defined wireless network architecture
The inflexible management and operation of today\u27s wireless access networks cannot meet the increasingly growing specific requirements, such as high mobility and throughput, service differentiation, and high-level programmability. In this paper, we put forward a novel multipath-transmission supported software-defined wireless network architecture (MP-SDWN), with the aim of achieving seamless handover, throughput enhancement, and flow-level wireless transmission control as well as programmable interfaces. In particular, this research addresses the following issues: 1) for high mobility and throughput, multi-connection virtual access point is proposed to enable multiple transmission paths simultaneously over a set of access points for users and 2) wireless flow transmission rules and programmable interfaces are implemented into mac80211 subsystem to enable service differentiation and flow-level wireless transmission control. Moreover, the efficiency and flexibility of MP-SDWN are demonstrated in the performance evaluations conducted on a 802.11 based-testbed, and the experimental results show that compared to regular WiFi, our proposed MP-SDWN architecture achieves seamless handover and multifold throughput improvement, and supports flow-level wireless transmission control for different applications
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
Network-based IP flow mobility support in 3GPPs evolved packet core
Includes bibliographical references.Mobile data traffic in cellular networks has increased tremendously in the last few years. Due to the costs associated with licensed spectrum, Mobile Network Operators (MNOs) are battling to manage these increased traffic growths. Offloading mobile data traffic to alternative low cost access networks like Wi-Fi has been proposed as a candidate solution to enable MNOs to alleviate congestion from the cellular networks. This dissertation investigates an offloading technique called IP flow mobility within the 3rd Generation Partnership Project (3GPP) all-IP mobile core network, the Evolved Packet Core (EPC). IP flow mobility would enable offloading a subset of the mobile user‟s traffic to an alternative access network while allowing the rest of the end-user‟s traffic to be kept in the cellular access; this way, traffic with stringent quality of service requirements like Voice over Internet Protocol (VoIP) would not experience service disruption or interruption when offloaded. This technique is different from previous offloading techniques where all the end-user‟s traffic is offloaded. IP flow mobility functionality can be realised with either host- or network-based mobility protocols. The recommended IP flow mobility standard of 3GPP is based on the host-based mobility solution, Dual-Stack Mobile IPv6. However, host-based mobility solutions have drawbacks like long handover latencies and produce signaling overhead in the radio access networks, which could be less appealing to MNOs. Network-based mobility solutions, compared to the host-based mobility solutions, have reduced handover latencies with no signaling overhead occurring in the radio access network. Proxy Mobile IPv6 is a networkbased mobility protocol adapted by 3GPP for mobility in the EPC. However, the standardisation of the Proxy Mobile IPv6-based IP flow mobility functionality is still ongoing within 3GPP. A review of related literature and standardisation efforts reveals shortcomings with the Proxy Mobile IPv6 mobility protocol in supporting IP flow mobility. Proxy Mobile IPv6 does not have a mechanism that would ensure session continuity during IP flow handoffs or a mechanism enabling controlling of the forwarding path of a particular IP flow i.e., specifying the access network for the IP flow. The latter mechanism is referred to as IP flow information management and flow-based routing. These mechanisms represent the basis for enabling the IP flow mobility functionality. To address the shortcomings of Proxy Mobile IPv6, this dissertation proposes vi enhancements to the protocol procedures to enable the two mechanisms for IP flow mobility functionality. The proposed enhancements for the session continuity mechanism draw on work in related literature and the proposed enhancements for the IP flow information management and flow-based routing mechanism are based on the concepts used in the Dual- Stack Mobile IPv6 IP flow mobility functionality. Together the two mechanisms allow the end-user to issue requests on what access network a particular IP flow should be routed, and ensure that the IP flows are moved to the particular access network without session discontinuity
Design and development of a software architecture for seamless vertical handover in mobile communications
In this work I firstly present an overview on current wireless
technology and network mobility focusing on
challenges and issues which arise when mobile nodes migrate among
different access networks, while employing real-time communications and
services. In literature many solutions propose different methods and
architectures to enhance vertical handover, the process of transferring a
network communication between two technologically different points of
attachment. After an extensive review of such solutions this document
describes my personal implementation of a fast vertical handover
mechanism for Android smartphones. I also performed a
reliability and performance comparison
between the current Android system and my enhanced architecture which have
both been tested in a
scenario where vertical handover was taking place between WiFi and cellular
network while the mobile node was using video streaming services.
Results show the approach of my implementation to be promising, encouraging
future works, some of which are suggested at the end of this dissertation
together with concluding remarks
Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks
Tesis por compendioProducts related with Intelligent Transportation Systems (ITS) are becoming
a reality on our roads.
All car manufacturers are starting to include Internet
access in their vehicles and to integrate smartphones directly from the
dashboard, but more and more services will be introduced in the near future.
Connectivity through "vehicular networks" will become a cornerstone of every
new proposal, and offering an adequate quality of service is obviously desirable.
However, a lot of work is needed for vehicular networks to offer performances
similar to those of the wired networks.
Vehicular networks can be characterized by two main features: high variability
due to mobility levels that can reach up to 250 kilometers per hour,
and heterogeneity, being that various competing versions from different vendors
have and will be released. Therefore, to make the deployment of efficient
services possible, an extensive study must be carried out and adequate tools
must be proposed and developed. This PhD thesis addresses the service deployment
problem in these networks at three different levels: (i) the physical
and link layer, showing an exhaustive analysis of the physical channel and
models; (ii) the network layer, proposing a forwarding protocol for IP packets;
and (iii) the transport layer, where protocols are proposed to improve data
delivery.
First of all, the two main wireless technologies used in vehicular networks
where studied and modeled, namely the 802.11 family of standards, particularly
802.11p, and the cellular networks focusing on LTE. Since 802.11p is a
quite mature standard, we defined (i) a propagation and attenuation model
capable of replicating the transmission range and the fading behavior of real
802.11p devices, both in line-of-sight conditions and when obstructed by small
obstacles, and (ii) a visibility model able to deal with large obstacles, such
as buildings and houses, in a realistic manner.
Additionally, we proposed a
model based on high-level performance indicators (bandwidth and delay) for
LTE, which makes application validation and evaluation easier.
At the network layer, a hybrid protocol called AVE is proposed for packet
forwarding by switching among a set of standard routing strategies. Depending
on the specific scenario, AVE selects one out of four different routing solutions:
a) two-hop direct delivery, b) Dynamic MANET On-demand (DYMO), c)
greedy georouting, and d) store-carry-and-forward technique, to dynamically
adapt its behavior to the specific situation.
At the transport layer, we proposed a content delivery protocol for reliable
and bidirectional unicast communication in lossy links that improves content
delivery in situations where the wireless network is the bottleneck.
It has
been designed, validated, optimized, and its performance has been analyzed
in terms of throughput and resource efficiency.
Finally, at system level, we propose an edge-assisted computing model that
allows reducing the response latency of several queries by placing a computing
unit at the network edge. This way, traffic traversal through the Internet is
avoided when not needed.
This scheme could be used in both 802.11p and
cellular networks, and in this thesis we decided to focus on its evaluation using
LTE networks.
The platform presented in this thesis combines all the individual efforts to
create a single efficient platform. This new environment could be used by any
provider to improve the quality of the user experience obtainable through the
proposed vehicular network-based services.Los productos relacionados con los Sistemas Inteligentes de Transporte (ITS)
se están transformando en una realidad en nuestras carreteras. Todos los
fabricantes de coches comienzan a incluir acceso a internet en sus vehículos y a
facilitar su integración con los teléfonos móviles, pero más y más servicios se
introducirán en el futuro.
La conectividad usando las "redes vehiculares" se
convertirá en la piedra angular de cada nueva propuesta, y ofrecer una calidad
de servicio adecuada será, obviamente, deseable. Sin embargo, se necesita
una gran cantidad de trabajo para que las redes vehiculares ofrezcan un
rendimiento similar al de las redes cableadas.
Las redes vehiculares quedan definidas por sus dos características básicas:
alto dinamismo, pues los nodos pueden alcanzar una velocidad relativa de más
de 250 km/h; y heterogeneidad, por la gran cantidad de propuestas diferentes
que los fabricantes están lanzando al mercado. Por ello, para hacer posible el
despliegue de servicios sobre ellas, se impone la necesidad de hacer un estudio
en profundidad de este entorno, y deben de proponerse y desarrollarse las
herramientas adecuadas.
Esta tesis ataca la problemática del despliegue de servicios en estas redes
a tres niveles diferentes: (i) el nivel físico y de enlace, mostrando varios análisis
en profundidad del medio físico y modelos derivados para su simulación;
(ii) el nivel de red, proponiendo un protocolo de difusión de la información
para los paquetes IP; y (iii) el nivel de transporte, donde otros protocolos son
propuestos para mejorar el rendimiento del transporte de datos.
En primer lugar, se han estudiado y modelado las dos principales tecnologías
inalámbricas que se utilizan para la comunicación en redes vehiculares,
la rama de estándares 802.11, en concreto 802.11p; y la comunicación celular,
en particular LTE. Dado que el estándar 802.11p es un estándar bastante
maduro, nos centramos en crear (i) un modelo de propagación y atenuación
capaz de replicar el rango de transmisión de dispositivos 802.11p reales, en
condiciones de visión directa y obstrucción por pequeños obstáculos, y (ii) un
modelo de visibilidad capaz de simular el efecto de grandes obstáculos, como
son los edifcios, de una manera realista.
Además, proponemos un modelo
basado en indicadores de rendimiento de alto nivel (ancho de banda y retardo)
para LTE, que facilita la validación y evaluación de aplicaciones.
En el plano de red, se propone un protocolo híbrido, llamado AVE, para
el encaminamiento y reenvío de paquetes usando un conjunto de estrategias
estándar de enrutamiento. Dependiendo del escenario, AVE elige entre cuatro
estrategias diferentes: a) entrega directa a dos saltos, b) Dynamic MANET
On-demand (DYMO) c) georouting voraz, y d) una técnica store-carry-and-
forward, para adaptar su comportamiento dinámicamente a cada situación.
En el plano de transporte, se propone un protocolo bidireccional de distribución
de contenidos en canales con pérdidas que mejora la entrega de contenidos
en situaciones en las que la red es un cuello de botella, como las redes
inalámbricas.
Ha sido diseñado, validado, optimizado, y su rendimiento ha
sido analizado en términos de productividad y eficiencia en la utilización de
recursos.
Finalmente, a nivel de sistema, proponemos un modelo de computación
asistida que permite reducir la latencia en la respuesta a muchas consultas
colocando una unidad de computación en el borde de la red, i.e., la red de
acceso. Este esquema podría ser usado en redes basadas en 802.11p y en redes
celulares, si bien en esta tesis decidimos centrarnos en su evaluación usando
redes LTE.
La plataforma presentada en esta tesis combina todos los esfuerzos individuales
para crear una plataforma única y eficiente. Este nuevo entorno puede
ser usado por cualquier proveedor para mejorar la calidad de la experiencia de
usuario en los servicios desplegados sobre redes vehiculares.Els productes relacionats amb els sistemes intel · ligents de transport (ITS)
s'estan transformant en una realitat en les nostres carreteres. Tots els fabri-
cants de cotxes comencen a incloure accés a internet en els vehicles i a facilitar-
ne la integració amb els telèfons mòbils, però en el futur més i més serveis s'hi
introduiran. La connectivitat usant les xarxes vehicular esdevindrà la pedra
angular de cada nova proposta, i oferir una qualitat de servei adequada serà,
òbviament, desitjable.
No obstant això, es necessita una gran quantitat de
treball perquè les xarxes vehiculars oferisquen un rendiment similar al de les
xarxes cablejades.
Les xarxes vehiculars queden definides per dues característiques bàsiques:
alt dinamisme, ja que els nodes poden arribar a una velocitat relativa de més
de 250 km/h; i heterogeneïtat, per la gran quantitat de propostes diferents
que els fabricants estan llançant al mercat.
Per això, per a fer possible el
desplegament de serveis sobre aquestes xarxes, s'imposa la necessitat de fer un
estudi en profunditat d'aquest entorn, i cal proposar i desenvolupar les eines
adequades.
Aquesta tesi ataca la problemàtica del desplegament de serveis en aquestes
xarxes a tres nivells diferents: (i) el nivell físic i d'enllaç , mostrant diverses
anàlisis en profunditat del medi físic i models derivats per simular-lo; (ii) el
nivell de xarxa, proposant un protocol de difusió de la informació per als
paquets IP; i (iii) el nivell de transport, on es proposen altres protocols per a
millorar el rendiment del transport de dades.
En primer lloc, s'han estudiat i modelat les dues principals tecnologies
sense fils que s'utilitzen per a la comunicació en xarxes vehiculars, la branca
d'estàndards 802.11, en concret 802.11p; i la comunicació cel · lular, en partic-
ular LTE. Atès que l'estàndard 802.11p és un estàndard bastant madur, ens
centrem a crear (i) un model de propagació i atenuació capaç de replicar el
rang de transmissió de dispositius 802.11p reals, en condicions de visió directa
i obstrucció per petits obstacles, i (ii) un model de visibilitat capaç de simular
l'efecte de grans obstacles, com són els edificis, d'una manera realista. A més,
proposem un model basat en indicadors de rendiment d'alt nivell (ample de
banda i retard) per a LTE, que facilita la validació i l'avaluació d'aplicacions.
En el pla de xarxa, es proposa un protocol híbrid, anomenat AVE, per
a l'encaminament i el reenviament de paquets usant un conjunt d'estratègies
estàndard d'encaminament.
Depenent de l'escenari , AVE tria entre quatre
estratègies diferents: a) lliurament directe a dos salts, b) Dynamic MANET
On-demand (DYMO) c) georouting voraç, i d) una tècnica store-carry-and-
forward, per a adaptar-ne el comportament dinàmicament a cada situació.
En el pla de transport, es proposa un protocol bidireccional de distribució
de continguts en canals amb pèrdues que millora el lliurament de continguts
en situacions en què la xarxa és un coll de botella, com les xarxes sense fils.
Ha sigut dissenyat, validat, optimitzat, i el seu rendiment ha sigut analitzat
en termes de productivitat i eficiència en la utilització de recursos.
Finalment, a nivell de sistema, proposem un model de computació assistida
que permet reduir la latència en la resposta a moltes consultes col · locant una
unitat de computació a la vora de la xarxa, és a dir, la xarxa d'accés. Aquest
esquema podria ser usat en xarxes basades en 802.11p i en xarxes cel · lulars, si
bé en aquesta tesi decidim centrar-nos en la seua avaluació usant xarxes LTE.
La plataforma presentada en aquesta tesi combina tots els esforços indi-
viduals per a crear una plataforma única i eficient. Aquest nou entorn pot ser
usat per qualsevol proveïdor per a millorar la qualitat de l'experiència d'usuari
en els serveis desplegats sobre xarxes vehiculars.Báguena Albaladejo, M. (2017). Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/85333TESISCompendi
A Survey on Handover Management in Mobility Architectures
This work presents a comprehensive and structured taxonomy of available
techniques for managing the handover process in mobility architectures.
Representative works from the existing literature have been divided into
appropriate categories, based on their ability to support horizontal handovers,
vertical handovers and multihoming. We describe approaches designed to work on
the current Internet (i.e. IPv4-based networks), as well as those that have
been devised for the "future" Internet (e.g. IPv6-based networks and
extensions). Quantitative measures and qualitative indicators are also
presented and used to evaluate and compare the examined approaches. This
critical review provides some valuable guidelines and suggestions for designing
and developing mobility architectures, including some practical expedients
(e.g. those required in the current Internet environment), aimed to cope with
the presence of NAT/firewalls and to provide support to legacy systems and
several communication protocols working at the application layer
- …