Using transfer ratio to evaluate EMC design of adjustable speed drive systems

This paper proposes a way to evaluate the conducted electromagnetic compatibility performance of variable speed drive systems. It is considered that the measured noise level is determined by two factors, the level of the noise source and the conversion efficiency of the propagation path from the source to the measurement equipments. They are corresponding to the two roles played by the converter. On the one hand, a converter provides the noise source and generates the noise current and voltage on the motor side with the cable and the motor. On the other hand, it acts as the propagation path with the DC bus and the rectifier to spread the noise generated on the motor side to the line side. The transfer ratio is defined as the ratio between the CM current on the motor side and the CM current on the line side. It can be used to evaluate the EMC design of a converter because it is independent of the cable and the motor. A simplified model is used to explain this characteristic. It can be measured when the converter is powered off. Verification is carried out by experimental results obtained from a 12-kVA laboratory system.\u

Challenges to the Integration of Renewable Resources at High System Penetration

Successfully integrating renewable resources into the electric grid at penetration levels to meet a 33 percent Renewables Portfolio Standard for California presents diverse technical and organizational challenges. This report characterizes these challenges by coordinating problems in time and space, balancing electric power on a range of scales from microseconds to decades and from individual homes to hundreds of miles. Crucial research needs were identified related to grid operation, standards and procedures, system design and analysis, and incentives, and public engagement in each scale of analysis. Performing this coordination on more refined scales of time and space independent of any particular technology, is defined as a “smart grid.” “Smart” coordination of the grid should mitigate technical difficulties associated with intermittent and distributed generation, support grid stability and reliability, and maximize benefits to California ratepayers by using the most economic technologies, design and operating approaches

Sustainable seabed mining: guidelines and a new concept for Atlantis II Deep

The feasibility of exploiting seabed resources is subject to the engineering solutions, and economic prospects. Due to rising metal prices, predicted mineral scarcities and unequal allocations of resources in the world, vast research programmes on the exploration and exploitation of seabed minerals are presented in 1970s. Very few studies have been published after the 1980s, when predictions were not fulfilled. The attention grew back in the last decade with marine mineral mining being in research and commercial focus again and the first seabed mining license for massive sulphides being granted in Papua New Guinea’s Exclusive Economic Zone.Research on seabed exploitation and seabed mining is a complex transdisciplinary field that demands for further attention and development. Since the field links engineering, economics, environmental, legal and supply chain research, it demands for research from a systems point of view. This implies the application of a holistic sustainability framework of to analyse the feasibility of engineering systems. The research at hand aims to close this gap by developing such a framework and providing a review of seabed resources. Based on this review it identifies a significant potential for massive sulphides in inactive hydrothermal vents and sediments to solve global resource scarcities. The research aims to provide background on seabed exploitation and to apply a holistic systems engineering approach to develop general guidelines for sustainable seabed mining of polymetallic sulphides and a new concept and solutions for the Atlantis II Deep deposit in the Red Sea.The research methodology will start with acquiring a broader academic and industrial view on sustainable seabed mining through an online survey and expert interviews on seabed mining. In addition, the Nautilus Minerals case is reviewed for lessons learned and identification of challenges. Thereafter, a new concept for Atlantis II Deep is developed that based on a site specific assessment.The research undertaken in this study provides a new perspective regarding sustainable seabed mining. The main contributions of this research are the development of extensive guidelines for key issues in sustainable seabed mining as well as a new concept for seabed mining involving engineering systems, environmental risk mitigation, economic feasibility, logistics and legal aspects

Practice and Innovations in Sustainable Transport

The book continues with an experimental analysis conducted to obtain accurate and complete information about electric vehicles in different traffic situations and road conditions. For the experimental analysis in this study, three different electric vehicles from the Edinburgh College leasing program were equipped and tracked to obtain over 50 GPS and energy consumption data for short distance journeys in the Edinburgh area and long-range tests between Edinburgh and Bristol. In the following section, an adaptive and robust square root cubature Kalman filter based on variational Bayesian approximation and Huber’s M-estimation is proposed to accurately estimate state of charge (SOC), which is vital for safe operation and efficient management of lithium-ion batteries. A coupled-inductor DC-DC converter with a high voltage gain is proposed in the following section to match the voltage of a fuel cell stack to a DC link bus. Finally, the book presents a review of the different approaches that have been proposed by various authors to mitigate the impact of electric buses and electric taxis on the future smart grid

Energy Management

Forecasts point to a huge increase in energy demand over the next 25 years, with a direct and immediate impact on the exhaustion of fossil fuels, the increase in pollution levels and the global warming that will have significant consequences for all sectors of society. Irrespective of the likelihood of these predictions or what researchers in different scientific disciplines may believe or publicly say about how critical the energy situation may be on a world level, it is without doubt one of the great debates that has stirred up public interest in modern times. We should probably already be thinking about the design of a worldwide strategic plan for energy management across the planet. It would include measures to raise awareness, educate the different actors involved, develop policies, provide resources, prioritise actions and establish contingency plans. This process is complex and depends on political, social, economic and technological factors that are hard to take into account simultaneously. Then, before such a plan is formulated, studies such as those described in this book can serve to illustrate what Information and Communication Technologies have to offer in this sphere and, with luck, to create a reference to encourage investigators in the pursuit of new and better solutions

Experimental study for evaluating the response of the power take off of a point absorber wave energy generation system using a hydraulic wave simulator

The increase in energy prices and the need to control the rate of climate change are two of the biggest challenges facing the planet. Despite the fact that the wave energy technology is still in its infancy, it is considered one of the most promising renewable energy sources that exhibits a large potential for sustainable growth towards Net Zero. In this paper, a novel design methodology for a new wave energy generation system is presented and the performance of its power take-off (PTO) or drivetrain is analysed. A complete description of the wave energy generation system is presented including the general concept of the power take-off, configuration, mechanical design, electrical system, simulation test-rig, expected power out and the force load on the system. The results from the power take-off system obtained from the simulation process of the test-rig using a hydraulic linear wave simulator, show that the change in the electric load produces different power and force values and consequently a wide range of efficiencies. It has been noticed that increasing the electric load leads to a better efficiency, i.e., high power and force values. However, there is a certain threshold where the system stops behaving in its high performance and its efficiency drops notably. This threshold depends not only on the electric load, but also on the values of the fixed parameters, i.e., wave cycle time, wave height and frequency. The finding will support the complete design of a point absorber system, including the buoy design, to interact with the expected level of wave patterns

Next-Generation Pedal: Integration of Sensors in a Braking Pedal for a Full Brake-by-Wire System

This article presents a novel approach to designing and validating a fully electronic braking pedal, addressing the growing integration of electronics in vehicles. With the imminent rise of brake-by-wire (BBW) technology, the brake pedal requires electronification to keep pace with industry advancements. This research explores technologies and features for the next-generation pedal, including low-power consumption electronics, cost-effective sensors, active adjustable pedals, and a retractable pedal for autonomous vehicles. Furthermore, this research brings the benefits of the water injection technique (WIT) as the base for manufacturing plastic pedal brakes towards reducing cost and weight while enhancing torsional stiffness. Communication with original equipment manufacturers (OEMs) has provided valuable insights and feedback, facilitating a productive exchange of ideas. The findings include two sensor prototypes utilizing inductive technology and printed-ink gauges. Significantly, reduced power consumption was achieved in a Hall-effect sensor already in production. Additionally, a functional BBW prototype was developed and validated. This research presents an innovative approach to pedal design that aligns with current electrification trends and autonomous vehicles. It positions the braking pedal as an advanced component that has the potential to redefine industry standards. In summary, this research significantly contributes to the electronic braking pedal technology presenting the critical industry needs that have driven technical studies and progress in the field of sensors, electronics, and materials, highlighting the challenges that component manufacturers will inevitably face in the forthcoming years.This work has been partially supported by the grant “Ayudas para el desarrollo de proyectos de I+D mediante la contratación de personas doctoradas y la realización de doctorados industriales, programa BIKAINTEK 2019” by the Department of Economic Development, Sustainability, and Environment of the Basque Government. Additionally, this work has been partially supported by the Government of Spain, through the Center for the Development of Industrial Technology (CDTI) under grant agreement IDI-20200198 and by Eusko Jaularitza-Gobierno Vasco (SOC4CRIS KK-2023/00015)

Volume 3 – Conference

We are pleased to present the conference proceedings for the 12th edition of the International Fluid Power Conference (IFK). The IFK is one of the world’s most significant scientific conferences on fluid power control technology and systems. It offers a common platform for the presentation and discussion of trends and innovations to manufacturers, users and scientists. The Chair of Fluid-Mechatronic Systems at the TU Dresden is organizing and hosting the IFK for the sixth time. Supporting hosts are the Fluid Power Association of the German Engineering Federation (VDMA), Dresdner Verein zur Förderung der Fluidtechnik e. V. (DVF) and GWT-TUD GmbH. The organization and the conference location alternates every two years between the Chair of Fluid-Mechatronic Systems in Dresden and the Institute for Fluid Power Drives and Systems in Aachen. The symposium on the first day is dedicated to presentations focused on methodology and fundamental research. The two following conference days offer a wide variety of application and technology orientated papers about the latest state of the art in fluid power. It is this combination that makes the IFK a unique and excellent forum for the exchange of academic research and industrial application experience. A simultaneously ongoing exhibition offers the possibility to get product information and to have individual talks with manufacturers. The theme of the 12th IFK is “Fluid Power – Future Technology”, covering topics that enable the development of 5G-ready, cost-efficient and demand-driven structures, as well as individual decentralized drives. Another topic is the real-time data exchange that allows the application of numerous predictive maintenance strategies, which will significantly increase the availability of fluid power systems and their elements and ensure their improved lifetime performance. We create an atmosphere for casual exchange by offering a vast frame and cultural program. This includes a get-together, a conference banquet, laboratory festivities and some physical activities such as jogging in Dresden’s old town.:Group 8: Pneumatics Group 9 | 11: Mobile applications Group 10: Special domains Group 12: Novel system architectures Group 13 | 15: Actuators & sensors Group 14: Safety & reliabilit