Inverse synthetic aperture radar imaging using a coherent ultrawideband random noise radar system

The University of Nebraska-Lincoln has developed an ultrawideband random noise radar operating over the 1- to 2-GHz frequency range. The system uses the technique of heterodyne correlation, and is thus phase coherent. It has therefore been used in applications such as interferometry, polarimetry, and Doppler estimation. This assesses the performance of this radar as a range-Doppler imaging system, in particular, inverse synthetic aperture radar (ISAR). By performing turntable experiments, we examine a number of issues that arise both from the wideband nature of the radar system and from the randomness of the transmit signal. Although the ultrawideband nature of the signal does yield some ambiguity as to the cross-range resolution of the system, it is seen that one may use the usual equation for cross-range resolution in narrowband systems with reasonable confidence. In addition, the random nature of the transmit waveform gives rise to variations from look to look in the ISAR images. High correlations are obtained for voltage and power amplitudes, while the complex voltage and the phase angle show low correlations from look to look. Finally, we present polarimetric color images of a complex target that captures its polarimetric scattering characteristics, which may be useful in automatic target recognition

An analysis of chosen image formation algorithms for synthetic aperture radar with FMCW

The modelling of FMCW SAR systems, due to long signal duration time, commonly used start-stop approximation for pulsed radars causes errors in the image. Continuous motion of the radar platform results in additional range-azimuth couplings and range walk term that should be considered in processing of signal from this type of radar. The paper presents an analysis of the following algorithms: Time Domain Correlation (TDC), Range Doppler Algorithm (RDA), and Range Migration Algorithm (RMA). The comparison of the algorithms is based on theoretical estimation of their computation complexity and the quality of images obtained on the basis of real signals of FMCW SAR systems

Automatic refocus and feature extraction of single-look complex SAR signatures of vessels

In recent years, spaceborne synthetic aperture radar ( SAR) technology has been considered as a complement to cooperative vessel surveillance systems thanks to its imaging capabilities. In this paper, a processing chain is presented to explore the potential of using basic stripmap single-look complex ( SLC) SAR images of vessels for the automatic extraction of their dimensions and heading. Local autofocus is applied to the vessels' SAR signatures to compensate blurring artefacts in the azimuth direction, improving both their image quality and their estimated dimensions. For the heading, the orientation ambiguities of the vessels' SAR signatures are solved using the direction of their ground-range velocity from the analysis of their Doppler spectra. Preliminary results are provided using five images of vessels from SLC RADARSAT-2 stripmap images. These results have shown good agreement with their respective ground-truth data from Automatic Identification System ( AIS) records at the time of the acquisitions.Postprint (published version

Three-Dimensional Imaging Method Incorporating Range Points Migration and Doppler Velocity Estimation for UWB Millimeter-Wave Radar

High-resolution, short-range sensors that can be applied in optically challenging environments (e.g., in the presence of clouds, fog, and/or dark smog) are in high demand. Ultrawideband (UWB) millimeter-wave radars are one of the most promising devices for the above-mentioned applications. For target recognition using sensors, it is necessary to convert observational data into full 3-D images with both time efficiency and high accuracy. For such conversion algorithm, we have already proposed the range points migration (RPM) method. However, in the existence of multiple separated objects, this method suffers from inaccuracy and high computational cost due to dealing with many observed RPs. To address this issue, this letter introduces Doppler-based RPs clustering into the RPM method. The results from numerical simulations, assuming 140-GHz band millimeter radars, show that the addition of Doppler velocity into the RPM method results in more accurate 3-D images with reducing computational costs

A Large Along-Track Baseline Approach for Ground Moving Target Indication Using TanDEM-X

In the paper a new method for ground moving target indication (GMTI) using two satellites (i.e. the TerraSAR-X and the TanDEM-X satellite) together is presented. The along-track baseline between the satellites is chosen to be in the order of several kilometres, so that each satellite observes the same moving vehicles at different times in the order of one to several seconds. The proposed method allows the estimation of the ground velocity of the moving targets as well as the estimation of the broadside positions without the need of complex bistatic processing techniques

Digital Beamforming and Traffic Monitoring Using the new FSAR System of DLR

In November 2006 the first X-band test flight of DLR’s new FSAR system has been performed successfully and in February 2007 the first flight campaign has been conducted for acquiring experimental multi-channel data of controlled ground moving targets. In the paper the performed experiments and the used setup of the FSAR X-band section are described and preliminary results in the field of ground moving target indication and digital beamforming are presented

Radar and RGB-depth sensors for fall detection: a review

This paper reviews recent works in the literature on the use of systems based on radar and RGB-Depth (RGB-D) sensors for fall detection, and discusses outstanding research challenges and trends related to this research field. Systems to detect reliably fall events and promptly alert carers and first responders have gained significant interest in the past few years in order to address the societal issue of an increasing number of elderly people living alone, with the associated risk of them falling and the consequences in terms of health treatments, reduced well-being, and costs. The interest in radar and RGB-D sensors is related to their capability to enable contactless and non-intrusive monitoring, which is an advantage for practical deployment and users’ acceptance and compliance, compared with other sensor technologies, such as video-cameras, or wearables. Furthermore, the possibility of combining and fusing information from The heterogeneous types of sensors is expected to improve the overall performance of practical fall detection systems. Researchers from different fields can benefit from multidisciplinary knowledge and awareness of the latest developments in radar and RGB-D sensors that this paper is discussing