Ergonomic Study on Stereoscopic Representations for Literacy Learning

制度:新 ; 報告番号:甲3363号 ; 学位の種類:博士(国際情報通信学) ; 授与年月日:2011/4/20 ; 早大学位記番号:新568

A Sound Approach Toward a Mobility Aid for Blind and Low-Vision Individuals

Reduced independent mobility of blind and low-vision individuals (BLVIs) cause considerable societal cost, burden on relatives, and reduced quality of life for the individuals, including increased anxiety, depression symptoms, need of assistance, risk of falls, and mortality. Despite the numerous electronic travel aids proposed since at least the 1940’s, along with ever-advancing technology, the mobility issues persist. A substantial reason for this is likely several and severe shortcomings of the field, both in regards to aid design and evaluation.In this work, these shortcomings are addressed with a generic design model called Desire of Use (DoU), which describes the desire of a given user to use an aid for a given activity. It is then applied on mobility of BLVIs (DoU-MoB), to systematically illuminate and structure possibly all related aspects that such an aid needs to aptly deal with, in order for it to become an adequate aid for the objective. These aspects can then both guide user-centered design as well as choice of test methods and measures.One such measure is then demonstrated in the Desire of Use Questionnaire for Mobility of Blind and Low-Vision Individuals (DoUQ-MoB), an aid-agnostic and comprehensive patient-reported outcome measure. The question construction originates from the DoU-MoB to ensure an encompassing focus on mobility of BLVIs, something that has been missing in the field. Since it is aid-agnostic it facilitates aid comparison, which it also actively promotes. To support the reliability of the DoUQ-MoB, it utilizes the best known practices of questionnaire design and has been validated once with eight orientation and mobility professionals, and six BLVIs. Based on this, the questionnaire has also been revised once.To allow for relevant and reproducible methodology, another tool presented herein is a portable virtual reality (VR) system called the Parrot-VR. It uses a hybrid control scheme of absolute rotation by tracking the user’s head in reality, affording intuitive turning; and relative movement where simple button presses on a controller moves the virtual avatar forward and backward, allowing for large-scale traversal while not walking physically. VR provides excellent reproducibility, making various aggregate movement analysis feasible, while it is also inherently safe. Meanwhile, the portability of the system facilitates testing near the participants, substantially increasing the number of potential blind and low-vision recruits for user tests.The thesis also gives a short account on the state of long-term testing in the field; it being short is mainly due to that there is not much to report. It then provides an initial investigation into possible outcome measures for such tests by taking instruments in use by Swedish orientation and mobility professionals as a starting point. Two of these are also piloted in an initial single-session trial with 19 BLVIs, and could plausibly be used for long-term tests after further evaluation.Finally, a discussion is presented regarding the Audomni project — the development of a primary mobility aid for BLVIs. Audomni is a visuo-auditory sensory supplementation device, which aims to take visual information and translate it to sound. A wide field-of-view, 3D-depth camera records the environment, which is then transformed to audio through the sonification algorithms of Audomni, and finally presented in a pair of open-ear headphones that do not block out environmental sounds. The design of Audomni leverages the DoU-MoB to ensure user-centric development and evaluation, in the aim of reaching an aid with such form and function that it grants the users better mobility, while the users still want to use it.Audomni has been evaluated with user tests twice, once in pilot tests with two BLVIs, and once in VR with a heterogenous set of 19 BLVIs, utilizing the Parrot-VR and the DoUQ-MoB. 76 % of responders (13 / 17) answered that it was very or extremely likely that they would want use Audomni along with their current aid. This might be the first result in the field demonstrating a majority of blind and low-vision participants reporting that they actually want to use a new electronic travel aid. This shows promise that eventual long-term tests will demonstrate an increased mobility of blind and low-vision users — the overarching project aim. Such results would ultimately mean that Audomni can become an aid that alleviates societal cost, reduces burden on relatives, and improves users’ quality of life and independence

Managing children's postural risk when using mobile technology at home: Challenges and strategies

Maintaining the musculoskeletal health of children using mobile information and communication technologies (ICT) at home presents a challenge. The physical environment influences postures during ICT use and can contribute to musculoskeletal complaints. Few studies have assessed postures of children using ICT in home environments. The present study investigated the Rapid Upper Limb Assessment (RULA) scores determined by 16 novice and 16 experienced raters. Each rater viewed 11 videotaped scenarios of a child using two types of mobile ICT at home. The Grand Scores and Action Levels determined by study participants were compared to those of an ergonomist experienced in postural assessment. All postures assessed were rated with an Action Level of 2 or above; representing a postural risk that required further investigation and/or intervention. The sensitivity of RULA to assess some of the unconventional postures adopted by children in the home is questioned

Methods and Tools for Objective Assessment of Psychomotor Skills in Laparoscopic Surgery

Training and assessment paradigms for laparoscopic surgical skills are evolving from traditional mentor–trainee tutorship towards structured, more objective and safer programs. Accreditation of surgeons requires reaching a consensus on metrics and tasks used to assess surgeons’ psychomotor skills. Ongoing development of tracking systems and software solutions has allowed for the expansion of novel training and assessment means in laparoscopy. The current challenge is to adapt and include these systems within training programs, and to exploit their possibilities for evaluation purposes. This paper describes the state of the art in research on measuring and assessing psychomotor laparoscopic skills. It gives an overview on tracking systems as well as on metrics and advanced statistical and machine learning techniques employed for evaluation purposes. The later ones have a potential to be used as an aid in deciding on the surgical competence level, which is an important aspect when accreditation of the surgeons in particular, and patient safety in general, are considered. The prospective of these methods and tools make them complementary means for surgical assessment of motor skills, especially in the early stages of training. Successful examples such as the Fundamentals of Laparoscopic Surgery should help drive a paradigm change to structured curricula based on objective parameters. These may improve the accreditation of new surgeons, as well as optimize their already overloaded training schedules

Hand Rehabilitation after Chronic Brain Damage: Effectiveness, Usability and Acceptance of Technological Devices: A Pilot Study

Purpose: The aim is to present an overview of existing tools for hand rehabilitation after brain injury and a pilot study to test HandTutor® in patients with chronic brain damage (CBD)

Analysis of Visualisation and Interaction Tools Authors

This document provides an in-depth analysis of visualization and interaction tools employed in the context of Virtual Museum. This analysis is required to identify and design the tools and the different components that will be part of the Common Implementation Framework (CIF). The CIF will be the base of the web-based services and tools to support the development of Virtual Museums with particular attention to online Virtual Museum.The main goal is to provide to the stakeholders and developers an useful platform to support and help them in the development of their projects, despite the nature of the project itself. The design of the Common Implementation Framework (CIF) is based on an analysis of the typical workflow ofthe V-MUST partners and their perceived limitations of current technologies. This document is based also on the results of the V-MUST technical questionnaire (presented in the Deliverable 4.1). Based on these two source of information, we have selected some important tools (mainly visualization tools) and services and we elaborate some first guidelines and ideas for the design and development of the CIF, that shall provide a technological foundation for the V-MUST Platform, together with the V-MUST repository/repositories and the additional services defined in the WP4. Two state of the art reports, one about user interface design and another one about visualization technologies have been also provided in this document

Interaction Design for Digital Musical Instruments

The thesis aims to elucidate the process of designing interactive systems for musical performance that combine software and hardware in an intuitive and elegant fashion. The original contribution to knowledge consists of: (1) a critical assessment of recent trends in digital musical instrument design, (2) a descriptive model of interaction design for the digital musician and (3) a highly customisable multi-touch performance system that was designed in accordance with the model. Digital musical instruments are composed of a separate control interface and a sound generation system that exchange information. When designing the way in which a digital musical instrument responds to the actions of a performer, we are creating a layer of interactive behaviour that is abstracted from the physical controls. Often, the structure of this layer depends heavily upon: 1. The accepted design conventions of the hardware in use 2. Established musical systems, acoustic or digital 3. The physical configuration of the hardware devices and the grouping of controls that such configuration suggests This thesis proposes an alternate way to approach the design of digital musical instrument behaviour – examining the implicit characteristics of its composite devices. When we separate the conversational ability of a particular sensor type from its hardware body, we can look in a new way at the actual communication tools at the heart of the device. We can subsequently combine these separate pieces using a series of generic interaction strategies in order to create rich interactive experiences that are not immediately obvious or directly inspired by the physical properties of the hardware. This research ultimately aims to enhance and clarify the existing toolkit of interaction design for the digital musician

Evolution of Game Controllers: Toward the Support of Gamers with Physical Disabilities

Video games, as an entertaining media, dates back to the \u201850s and their hardware device underwent a long evolution starting from hand-made devices such as the \u201ccathode-ray tube amusement device\u201d up to the modern mass-produced consoles. This evolution has, of course, been accompanied by increasingly specialized interaction mechanisms. As of today, interaction with games is usually performed through industry-standard devices. These devices can be either general purpose (e.g., mouse and keyboard) or specific for gaming (e.g., a gamepad). Unfortunately, for marketing reasons, gaming interaction devices are not usually designed taking into consideration the requirements of gamers with physical disabilities. In this paper, we will offer a review of the evolution of gaming control devices with a specific attention to their use by players with physical disabilities in the upper limbs. After discussing the functionalities introduced by controllers designed for disabled players we will also propose an innovative game controller device. The proposed game controller is built around a touch screen interface which can be configured based on the user needs and will be accessible by gamers which are missing fingers or are lacking control in hands movement