Torque behavior of one-phase permanent magnet AC motor

This paper presents a detailed comparative study of two starting and running methods for a single-phase permanent magnet synchronous motor, equipped with a squirrel-cage rotor. The analysis of the motor performance is realized for a pulse width modulated (PWM) inverter fed motor and for a capacitor-start, capacitor-run motor. The developed approach may be extended to any 1-phase ac motor—induction, synchronous reluctance or synchronous permanent magnet

A study of the engineering calculations for iron losses in 3-phase AC motor models

This paper presents a study of the practical issues that need to be addressed by the engineering approaches to the incorporation of iron loss calculations into analytical and numerical models of AC motors. The total iron loss is estimated by summing up different loss components according to the analysed engineering approach. Illustrative examples are used and these are a 3-phase interior permanent magnet (IPM) motor and a 3-phase induction motor. All the models presented are compared with the no-load and loaded conditions test data. ©2007 IEEE

Influence of the amount of permanent-magnet material in fractional-slot permanent-magnet synchronous machines

The efficiency of permanent-magnet (PM) synchronous machines with outer rotor and concentrated windings is investigated as a function of the mass of magnets used, keeping the power, volume, and mechanical air-gap thickness constant. In order to be useful for electric vehicle motors and wind turbine generators, the efficiency is computed in wide speed and torque ranges, including overload. For a given type and amount of magnets, the geometry of the machine and the efficiency map are computed by analytical models and finite-element models, taken into account the iron loss, copper loss, magnet loss, and pulsewidth-modulation loss. The models are validated by experiments. Furthermore, the demagnetization risk and torque ripple are studied as functions of the mass of magnets in the machine. The effect of the mass of magnets is investigated for several soft magnetic materials, for several combinations of number of poles and number of stator slots, and for both rare earth (NdFeB) magnets and ferrite magnets. It is observed that the amount of PM material can vary in a wide range with a minor influence on the efficiency, torque density, and torque ripple and with a limited demagnetization risk

Evaluation of the magnetization direction effects on ferrite PM brushless fractional machines

Permanent magnets are frequently adopted in small brushless machines for automotive applications. Normally anisotropic ferrites, but some research on bonded magnets is being carried on. Several types of magnetization can be proposed, involving different levels of complexity in the magnetization process. In the paper a comparison between parallel and radial magnetization is described, taking into account on one side the major complexity of the radial process and on the other the small power derating of the paralle

PM fractional machines adopting bonded magnets: effect of different magnetizations on the energetic performance

The adoption of Permanent Magnets in small brushless machines for automotive applications is becoming frequent. Some research on bonded magnets is being carried on to substitute the ferrites. In the paper the parallel and radial magnetizations are considered: the different process complexity levels are analyzed and the effects on the iron losses and the energetic performances are evaluated by means of a simulation analysis and its experimental validatio

Asynchronous performance analysis of a single-phase capacitor-start, capacitor-run permanent magnet motor

This work presents a detailed analysis of the asynchronous torque components (average cage, magnet braking torque and pulsating) for a single-phase capacitor-start, capacitor-run permanent magnet motor. The computed envelope of pulsating torque superimposed over the average electromagnetic torque leads to an accurate prediction of starting torque. The developed approach is realized by means of a combination of symmetrical components and d-q axes theory and it can be extended for any m-phase AC motor - induction, synchronous reluctance or synchronous permanent magnet. The resultant average electromagnetic torque is determined by superimposing the asynchronous torques and magnet braking torque effects

Direct Torque Control of Permanent Magnet Synchronous Motor

Permanent Magnet Synchronous Motors (PMSM’s) are used in places that require fast torque response and high-performance operation of the machine. The Direct Torque Control (DTC) technique is different from methods which use current controllers in an proper reference frame to control the motor torque and fluxe values. The DTC technique does not any current controllers. DTC controls the Voltage source Inverter states on the basis of difference between the required and obtained torque and flux values. This is done by selecting one out of the six voltage vectors obtained by the Inverter (VSI) to have torque and flux fluctuations in between the limits of 2 hysteresis bands. This thesis obtains the modelling of the Direct Torque Control (DTC) system of PMSM using MATLAB/Simulink®. Speed control of PMSM using Field Oriented Control technique and Direct Torque Space Vector Pulse Width Modulation technique is also analysed and compared with traditional DTC. Simulation results are presented to help analyse the system performance and PI controller parameters influence on the system performance. The analysis is also done with fuzzy logic controller

Design of High Efficiency Brushless Permanent Magnet Machines and Driver System

The dissertation is concerned with the design of high-efficiency permanent magnet synchronous machinery and the control system. The dissertation first talks about the basic concept of the permanent magnet synchronous motor (PMSM) design and the mathematics design model of the advanced design method. The advantage of the design method is that it can increase the high load capacity at no cost of increasing the total machine size. After that, the control method of the PMSM and Permanent magnet synchronous generator (PMSG) is introduced. The design, simulation, and test of a permanent magnet brushless DC (BLDC) motor for electric impact wrench and new mechanical structure are first presented based on the design method. Finite element analysis based on the Maxwell 2D is built to optimize the design and the control board is designed using Altium Designer. Both the motor and control board have been fabricated and tested to verify the design. The electrical and mechanical design are combined, and it provides an analytical IPMBLDC design method and an innovative and reasonable mechanical dynamical calculation method for the impact wrench system, which can be used in whole system design of other functional electric tools. A 2kw high-efficiency alternator system and its control board system are also designed, analyzed and fabricated applying to the truck auxiliary power unit (APU). The alternator system has two stages. The first stage is that the alternator three-phase outputs are connected to the three-phase active rectifier to get 48V DC. An advanced Sliding Mode Observer (SMO) is used to get an alternator position. The buck is used for the second stage to get 14V DC output. The whole system efficiency is much higher than the traditional system using induction motor

Design optimization of an interior-type permanent magnet BLDC motor using PSO and improved MEC

In this paper, an improved magnetic equivalent circuit (MEC) is applied to calculate the nonlinear magnetic field in an interior-type permanent-magnet (IPM) brushless DC (BLDC) motor. Compared with the finite element method, the MEC method is much more time efficient, whereas compared with the conventional MEC method, the improved MEC is more accurate since it takes the complicate topological structure of the motor into account. A rough design of the IPM BLDC motor was firstly conducted by the improved MEC method. The particle swarm optimization (PSO) algorithm is then employed to refine the design for optimal structural parameters that result in the lowest cost and highest performance