18 research outputs found
High Capacity CDMA and Collaborative Techniques
The thesis investigates new approaches to increase the user capacity and improve the error
performance of Code Division Multiple Access (CDMA) by employing adaptive interference cancellation
and collaborative spreading and space diversity techniques. Collaborative Coding Multiple
Access (CCMA) is also investigated as a separate technique and combined with CDMA. The
advantages and shortcomings of CDMA and CCMA are analysed and new techniques for both the
uplink and downlink are proposed and evaluated.
Multiple access interference (MAI) problem in the uplink of CDMA is investigated first. The
practical issues of multiuser detection (MUD) techniques are reviewed and a novel blind adaptive
approach to interference cancellation (IC) is proposed. It exploits the constant modulus (CM)
property of digital signals to blindly suppress interference during the despreading process and obtain
amplitude estimation with minimum mean squared error for use in cancellation stages. Two
new blind adaptive receiver designs employing successive and parallel interference cancellation
architectures using the CM algorithm (CMA) referred to as ‘CMA-SIC’ and ‘BA-PIC’, respectively,
are presented. These techniques have shown to offer near single user performance for large
number of users. It is shown to increase the user capacity by approximately two fold compared
with conventional IC receivers. The spectral efficiency analysis of the techniques based on output
signal-to interference-and-noise ratio (SINR) also shows significant gain in data rate. Furthermore,
an effective and low complexity blind adaptive subcarrier combining (BASC) technique using a
simple gradient descent based algorithm is proposed for Multicarrier-CDMA. It suppresses MAI
without any knowledge of channel amplitudes and allows large number of users compared with
equal gain and maximum ratio combining techniques normally used in practice.
New user collaborative schemes are proposed and analysed theoretically and by simulations
in different channel conditions to achieve spatial diversity for uplink of CCMA and CDMA. First,
a simple transmitter diversity and its equivalent user collaborative diversity techniques for CCMA
are designed and analysed. Next, a new user collaborative scheme with successive interference
cancellation for uplink of CDMA referred to as collaborative SIC (C-SIC) is investigated to reduce
MAI and achieve improved diversity. To further improve the performance of C-SIC under high
system loading conditions, Collaborative Blind Adaptive SIC (C-BASIC) scheme is proposed.
It is shown to minimize the residual MAI, leading to improved user capacity and a more robust
system. It is known that collaborative diversity schemes incur loss in throughput due to the need of
orthogonal time/frequency slots for relaying source’s data. To address this problem, finally a novel
near-unity-rate scheme also referred to as bandwidth efficient collaborative diversity (BECD) is proposed and evaluated for CDMA. Under this scheme, pairs of users share a single spreading sequence to exchange and forward their data employing a simple superposition or space-time
encoding methods. At the receiver collaborative joint detection is performed to separate each
paired users’ data. It is shown that the scheme can achieve full diversity gain at no extra bandwidth
as inter-user channel SNR becomes high.
A novel approach of ‘User Collaboration’ is introduced to increase the user capacity of CDMA
for both the downlink and uplink. First, collaborative group spreading technique for the downlink
of overloaded CDMA system is introduced. It allows the sharing of the same single spreading
sequence for more than one user belonging to the same group. This technique is referred to as
Collaborative Spreading CDMA downlink (CS-CDMA-DL). In this technique T-user collaborative
coding is used for each group to form a composite codeword signal of the users and then a
single orthogonal sequence is used for the group. At each user’s receiver, decoding of composite
codeword is carried out to extract the user’s own information while maintaining a high SINR performance.
To improve the bit error performance of CS-CDMA-DL in Rayleigh fading conditions,
Collaborative Space-time Spreading (C-STS) technique is proposed by combining the collaborative
coding multiple access and space-time coding principles. A new scheme for uplink of CDMA
using the ‘User Collaboration’ approach, referred to as CS-CDMA-UL is presented next. When
users’ channels are independent (uncorrelated), significantly higher user capacity can be achieved
by grouping multiple users to share the same spreading sequence and performing MUD on per
group basis followed by a low complexity ML decoding at the receiver. This approach has shown
to support much higher number of users than the available sequences while also maintaining the
low receiver complexity. For improved performance under highly correlated channel conditions,
T-user collaborative coding is also investigated within the CS-CDMA-UL system
Interference Management and Energy Efficiency in Satellite Communications
The main areas of research of this thesis are Interference Management and Link-Level Power Efficiency for Satellite Communications. The thesis is divided in two parts. Part I tackles the problem of interference environments in satellite communications, and interference mitigation strategies, not just in terms of avoidance of the interferers, but also in terms of actually exploiting the interference present in the system as a useful signal. The analysis follows a top-down approach across different levels of investigation, starting from system level consideration on interference management, down to link-level aspects and to intra-receiver design. Interference Management techniques are proposed at all the levels of investigation, with interesting results.
Part II is related to efficiency in the power domain, for instance in terms of required Input Back-off at the power amplifiers, which can be an issue for waveform based on linear modulations, due to their varying envelope. To cope with such aspects, an analysis is carried out to compare linear modulation with waveforms based on constant envelope modulations. It is shown that in some scenarios, constant envelope waveforms, even if at lower spectral efficiency, outperform linear modulation waveform in terms of energy efficiency
Decentralized Ultra-Reliable Low-Latency Communications through Concurrent Cooperative Transmission
Emerging cyber-physical systems demand for communication technologies that enable seamless interactions between humans and physical objects in a shared environment. This thesis proposes decentralized URLLC (dURLLC) as a new communication paradigm that allows the nodes in a wireless multi-hop network (WMN) to disseminate data quickly, reliably and without using a centralized infrastructure. To enable the dURLLC paradigm, this thesis explores the practical feasibility of concurrent cooperative transmission (CCT) with orthogonal frequency-division multiplexing (OFDM). CCT allows for an efficient utilization of the medium by leveraging interference instead of trying to avoid collisions. CCT-based network flooding disseminates data in a WMN through a reception-triggered low-level medium access control (MAC). OFDM provides high data rates by using a large bandwidth, resulting in a short transmission duration for a given amount of data.
This thesis explores CCT-based network flooding with the OFDM-based IEEE 802.11 Non-HT and HT physical layers (PHYs) to enable interactions with commercial devices. An analysis of CCT with the IEEE 802.11 Non-HT PHY investigates the combined effects of the phase offset (PO), the carrier frequency offset (CFO) and the time offset (TO) between concurrent transmitters, as well as the elapsed time. The analytical results of the decodability of a CCT are validated in simulations and in testbed experiments with Wireless Open Access Research Platform (WARP) v3 software-defined radios (SDRs). CCT with coherent interference (CI) is the primary approach of this thesis.
Two prototypes for CCT with CI are presented that feature mechanisms for precise synchronization in time and frequency. One prototype is based on the WARP v3 and its IEEE 802.11 reference design, whereas the other prototype is created through firmware modifications of the Asus RT-AC86U wireless router. Both prototypes are employed in testbed experiments in which two groups of nodes generate successive CCTs in a ping-pong fashion to emulate flooding processes with a very large number of hops. The nodes stay synchronized in experiments with 10 000 successive CCTs for various modulation and coding scheme (MCS) indices and MAC service data unit (MSDU) sizes. The URLLC requirement of delivering a 32-byte MSDU with a reliability of 99.999 % and with a latency of 1 ms is assessed in experiments with 1 000 000 CCTs, while the reliability is approximated by means of the frame reception rate (FRR). An FRR of at least 99.999 % is achieved at PHY data rates of up to 48 Mbit/s under line-of-sight (LOS) conditions and at PHY data rates of up to 12 Mbit/s under non-line-of-sight (NLOS) conditions on a 20 MHz wide channel, while the latency per hop is 48.2 µs and 80.2 µs, respectively. With four multiple input multiple output (MIMO) spatial streams on a 40 MHz wide channel, a LOS receiver achieves an FRR of 99.5 % at a PHY data rate of 324 Mbit/s. For CCT with incoherent interference, this thesis proposes equalization with time-variant zero-forcing (TVZF) and presents a TVZF receiver for the IEEE 802.11 Non-HT PHY, achieving an FRR of up to 92 % for CCTs from three unsyntonized commercial devices. As CCT-based network flooding allows for an implicit time synchronization of all nodes, a reception-triggered low-level MAC and a reservation-based high-level MAC may in combination support various applications and scenarios under the dURLLC paradigm
Optimization and Applications of Modern Wireless Networks and Symmetry
Due to the future demands of wireless communications, this book focuses on channel coding, multi-access, network protocol, and the related techniques for IoT/5G. Channel coding is widely used to enhance reliability and spectral efficiency. In particular, low-density parity check (LDPC) codes and polar codes are optimized for next wireless standard. Moreover, advanced network protocol is developed to improve wireless throughput. This invokes a great deal of attention on modern communications
Cooperative communication in wireless networks: algorithms, protocols and systems
Current wireless network solutions are based on a link abstraction where a
single co-channel transmitter transmits in any time duration. This model severely
limits the performance that can be obtained from the network. Being inherently an
extension of a wired network model, this model is also incapable of handling the
unique challenges that arise in a wireless medium. The prevailing theme of this
research is to explore wireless link abstractions that incorporate the broadcast and
space-time varying nature of the wireless channel. Recently, a new paradigm for
wireless networks which uses the idea of 'cooperative transmissions' (CT) has garnered
significant attention. Unlike current approaches where a single transmitter transmits
at a time in any channel, with CT, multiple transmitters transmit concurrently after
appropriately encoding their transmissions. While the physical layer mechanisms for
CT have been well studied, the higher layer applicability of CT has been relatively
unexplored. In this work, we show that when wireless links use CT, several network
performance metrics such as aggregate throughput, security and spatial reuse can
be improved significantly compared to the current state of the art. In this context,
our first contribution is Aegis, a framework for securing wireless networks against
eavesdropping which uses CT with intelligent scheduling and coding in Wireless Local
Area networks. The second contribution is Symbiotic Coding, an approach to encode
information such that successful reception is possible even upon collisions. The third
contribution is Proteus, a routing protocol that improves aggregate throughput in
multi-hop networks by leveraging CT to adapt the rate and range of links in a flow.
Finally, we also explore the practical aspects of realizing CT using real systems.PhDCommittee Chair: Sivakumar, Raghupathy; Committee Member: Ammar, Mostafa; Committee Member: Ingram, Mary Ann; Committee Member: Jayant, Nikil; Committee Member: Riley, Georg
Cooperative diversity techniques for high-throughput wireless relay networks
Relay communications has attracted a growing interest in wireless communications with application to various enhanced technologies. This thesis considers a number of issues related to data throughput in various wireless relay network models. Particularly, new implementations of network coding (NC) and space-time coding (STC) techniques are investigated to offer various means of achieving high-throughput relay communications.
Firstly, this thesis investigates different practical automatic repeat request (ARQ) retransmission protocols based on NC for two-way wireless relay networks to improve throughput efficiency. Two improved NC-based ARQ schemes are designed based on go-back-N and selective-repeat (SR) protocols. Addressing ARQ issues in multisource multidestination relay networks, a new NC-based ARQ protocol is proposed and two packet-combination algorithms are developed for retransmissions at relay and sources to significantly improve the throughput.
In relation to the concept of channel quality indicator (CQI) reporting in two-way relay networks, two new efficient CQI reporting schemes are designed based on NC to improve the system throughput by allowing two terminals to simultaneously estimate the CQI of the distant terminal-relay link without incurring additional overhead. The transmission time for CQI feedback at the relays is reduced by half while the increase in complexity and the loss of performance are shown to be negligible. Furthermore, a low-complexity relay selection scheme is suggested to reduce the relay searching complexity.
For the acknowledgment (ACK) process, this thesis proposes a new block ACK scheme based on NC to significantly reduce the ACK overheads and therefore produce an enhanced throughput. The proposed scheme is also shown to improve the reliability of block ACK transmission and reduce the number of data retransmissions for a higher system throughput. Additionally, this thesis presents a new cooperative retransmission scheme based on relay cooperation and NC to considerably reduce the number of retransmission packets and im- prove the reliability of retransmissions for a more power efficient and higher throughput system with non-overlapped retransmissions. Moreover, two relay selection schemes are recommended to determine the optimised number of relays for the retransmission.
Finally, with respect to cognitive wireless relay networks (CWRNs), this thesis proposes a new cooperative spectrum sensing (CSS) scheme to improve the spectrum sensing performance and design a new CSS scheme based on NC for three-hop CWRNs to improve system throughput. Furthermore, a new distributed space-time-frequency block code (DSTFBC) is designed for a two- hop nonregenerative CWRN over frequency-selective fading channels. The proposed DSTFBC design achieves higher data rate, spatial diversity gain, and decoupling detection of data blocks at all destination nodes with a low-complexity receiver structure