Metastability in better-than-worst-case designs

Abstract Better-Than-Worst-Case-Designs use timing speculation to run with a cycle period faster than the one required for worst-case conditions. This speculation may produce timing violations and metastability that result in failures and non-deterministic timing behavior. The effects of these phenomena are not always well understood by designers and researchers in this area

Timing error detection and correction for power efficiency: an aggressive scaling approach

Low-power consumption has become an important aspect of processors and systems design. Many techniques ranging from architectural to system level are available. Voltage scaling or frequency boosting methods are the most effective to achieve low-power consumption as the dynamic power is proportional to the frequency and to the square of the supply voltage. The basic principle of operation of aggressive voltage scaling is to adjust the supply voltage to the lowest level possible to achieve minimum power consumption while maintaining reliable operations. Similarly, aggressive frequency boosting is to alter the operating frequency to achieve optimum performance improvement. In this study, an aggressive technique which employs voltage or frequency varying hardware circuit with the time-borrowing feature is presented. The proposed technique double samples the data to detect any timing violations as the frequency/voltage is scaled. The detected violations are masked by phase delaying the flip-flop clock to capture the late arrival data. This makes the system timing error tolerant without incurring error correction timing penalty. The proposed technique is implemented in a field programmable gate array using a two-stage arithmetic pipeline. Results on various benchmarks clearly demonstrate the achieved power savings and performance improvement.N/

Adaptive clock with useful jitter

Report - Departament Ciències de la ComputacióThe growing variability in nanoelectronic devices due to uncertainties from the manufacturing process and environmental conditions (power supply, temperature, aging) requires increasing design guardbands, forcing circuits to work with conservative clock frequencies. Various schemes for clock generation based on ring oscillators have been proposed with the goal to mitigate the power and performance losses attributable to variability. However, there has been no systematic analysis to quantify the benefits of such schemes.This paper presents and analyzes an Adaptive Clocking scheme with Useful Jitter (ACUJ) that uses variability as an opportunity to reduce power by adapting the clock frequency to the varying environmental conditions and, thus, reducing guardband margins significantly. Power can be reduced between 20% and 40% at iso-performance and performance can be boosted by similar amounts at iso-power. Additionally, energy savings can be translated to substantial advantages in terms of reliability and thermal management. More importantly, the technology can be adopted with minimal modifications to conventional EDA flows.Postprint (published version

Design of variation-tolerant synchronizers for multiple clock and voltage domains

PhD ThesisParametric variability increasingly affects the performance of electronic circuits as the fabrication technology has reached the level of 32nm and beyond. These parameters may include transistor Process parameters (such as threshold voltage), supply Voltage and Temperature (PVT), all of which could have a significant impact on the speed and power consumption of the circuit, particularly if the variations exceed the design margins. As systems are designed with more asynchronous protocols, there is a need for highly robust synchronizers and arbiters. These components are often used as interfaces between communication links of different timing domains as well as sampling devices for asynchronous inputs coming from external components. These applications have created a need for new robust designs of synchronizers and arbiters that can tolerate process, voltage and temperature variations. The aim of this study was to investigate how synchronizers and arbiters should be designed to tolerate parametric variations. All investigations focused mainly on circuit-level and transistor level designs and were modeled and simulated in the UMC90nm CMOS technology process. Analog simulations were used to measure timing parameters and power consumption along with a “Monte Carlo” statistical analysis to account for process variations. Two main components of synchronizers and arbiters were primarily investigated: flip-flop and mutual-exclusion element (MUTEX). Both components can violate the input timing conditions, setup and hold window times, which could cause metastability inside their bistable elements and possibly end in failures. The mean-time between failures is an important reliability feature of any synchronizer delay through the synchronizer. The MUTEX study focused on the classical circuit, in addition to a number of tolerance, based on increasing internal gain by adding current sources, reducing the capacitive loading, boosting the transconductance of the latch, compensating the existing Miller capacitance, and adding asymmetry to maneuver the metastable point. The results showed that some circuits had little or almost no improvements, while five techniques showed significant improvements by reducing τ and maintaining high tolerance. Three design approaches are proposed to provide variation-tolerant synchronizers. wagging synchronizer proposed to First, the is significantly increase reliability over that of the conventional two flip-flop synchronizer. The robustness of the wagging technique can be enhanced by using robust τ latches or adding one more cycle of synchronization. The second approach is the Metastability Auto-Detection and Correction (MADAC) latch which relies on swiftly detecting a metastable event and correcting it by enforcing the previously stored logic value. This technique significantly reduces the resolution time down from uncertain synchronization technique is proposed to transfer signals between Multiple- Voltage Multiple-Clock Domains (MVD/MCD) that do not require conventional level-shifters between the domains or multiple power supplies within each domain. This interface circuit uses a synchronous set and feedback reset protocol which provides level-shifting and synchronization of all signals between the domains, from a wide range of voltage-supplies and clock frequencies. Overall, synchronizer circuits can tolerate variations to a greater extent by employing the wagging technique or using a MADAC latch, while MUTEX tolerance can suffice with small circuit modifications. Communication between MVD/MCD can be achieved by an asynchronous handshake without a need for adding level-shifters.The Saudi Arabian Embassy in London, Umm Al-Qura University, Saudi Arabi

inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices

Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from $\approx$30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads

Circuit Techniques for Adaptive and Reliable High Performance Computing.

Increasing power density with process scaling has caused stagnation in the clock speed of modern microprocessors. Accordingly, designers have adopted message passing and shared memory based multicore architectures in order to keep up with the rapidly rising demand for computing throughput. At the same time, applications are not entirely parallel and improving single-thread performance continues to remain critical. Additionally, reliability is also worsening with process scaling, and margining for failures due to process and environmental variations in modern technologies consumes an increasingly large portion of the power/performance envelope. In the wake of multicore computing, reliability of signal synchronization between the cores is also becoming increasingly critical. This forces designers to search for alternate efficient methods to improve compute performance while addressing reliability. Accordingly, this dissertation presents innovative circuit and architectural techniques for variation-tolerance, performance and reliability targeted at datapath logic, signal synchronization and memories. Firstly, a domino logic based design style for datapath logic is presented that uses Adaptive Robustness Tuning (ART) in addition to timing speculation to provide up to 71% performance gains over conventional domino logic in 32bx32b multiplier in 65nm CMOS. Margins are reduced until functionality errors are detected, that are used to guide the tuning. Secondly, for signal synchronization across clock domains, a new class of dynamic logic based synchronizers with single-cycle synchronization latency is presented, where pulses, rather than stable intermediate voltages cause metastability. Such pulses are amplified using skewed inverters to improve mean time between failures by ~1e6x over jamb latches and double flip-flops at 2GHz in 65nm CMOS. Thirdly, a reconfigurable sensing scheme for 6T SRAMs is presented that employs auto-zero calibration and pre-amplification to improve sensing reliability (by up to 1.2 standard deviations of NMOS threshold voltage in 28nm CMOS); this increased reliability is in turn traded for ~42% sensing speedup. Finally, a main memory architecture design methodology to address reliability and power in the context of Exascale computing systems is presented. Based on 3D-stacked DRAMs, the methodology co-optimizes DRAM access energy, refresh power and the increased cost of error resilience, to meet stringent power and reliability constraints.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/107238/1/bharan_1.pd

An Energy-Efficient System with Timing-Reliable Error-Detection Sequentials

A new type of energy-efficient digital system that integrate EDS and DVS circuits has been developed. In these systems, EDS-monitored paths convert the PVT variations into timing variations. Nevertheless, the conversion can suffer from the reliability issue (extrinsic EDS-reliability). EDS circuits detect the unfavorable timing variations (so called ``error'') and guide DVS circuits to adjust the operating voltage to a proper lower level to save the energy. However, the error detection is generally susceptible to the metastability problem (intrinsic EDS-reliability) due to the synchronizer in EDS circuits. The MTBF due to metastability is exponentially related to the synchronizer delay. This dissertation proposes a new EDS circuit deployment strategy to enhance the extrinsic EDS-reliability. This strategy requires neither buffer insertion nor an extra clock and is applicable for FPGA implementations. An FPGA-based Discrete Cosine Transform with EDS and DVS circuits deployed in this fashion demonstrates up to 16.5\% energy savings over a conventional design at equivalent frequency setting and image quality, with a 0.8\% logic element and 3.5\% maximum frequency penalties. VBSs are proposed to improve the synchronizer delay under single low-voltage supply environments. A VBS consists of a Jamb latch and a switched-capacitor-based charge pump that provides a voltage boost to the Jamb Latch to speed up the metastability resolution. The charge pump can be either CVBS or MVBS. A new methodology for extracting the metastability parameters of synchronizers under changing biasing currents is proposed. For a 1-year MTBF specification, MVBS and CVBS show 2.0 to 2.7 and 5.1 to 9.8 times the delay improvement over the basic Jamb latch, respectively, without large power consumption. Optimization techniques including transistor sizing, FBB and dynamic implementation are further applied. For a common MTBF specification at typical PVT conditions, the optimized MVBS and CVBS show 2.97 to 7.57 and 4.14 to 8.13 times the delay improvement over the basic Jamb latch, respectively. In post-Layout simulations, MVBS and CVBS are 1.84 and 2.63 times faster than the basic Jamb latch, respectively

AN EFFICIENT ERROR DETECTION AND CORRECTION METHOD FOR TIMING ERRORS

Timing errors are an important concern in nanometer CMOS technologies. A promising way to overcome the timing errors is the development of error detection and correction techniques. A local error detection and correction technique is done in this work. It is based on a new bit flipping flip flop. Whenever a timing error is detected, it is corrected by complementing the output of the corresponding flip flop. No extra circuitry is inserted in the design. Timing errors are identified and corrected within a single cycle and hence design complexity is reduced which results in reduced power consumption and low silicon area when compared to the earlier designs