Doctor of Philosophy

dissertationAsynchronous design has a very promising potential even though it has largely received a cold reception from industry. Part of this reluctance has been due to the necessity of custom design languages and computer aided design (CAD) flows to design, optimize, and validate asynchronous modules and systems. Next generation asynchronous flows should support modern programming languages (e.g., Verilog) and application specific integrated circuits (ASIC) CAD tools. They also have to support multifrequency designs with mixed synchronous (clocked) and asynchronous (unclocked) designs. This work presents a novel relative timing (RT) based methodology for generating multifrequency designs using synchronous CAD tools and flows. Synchronous CAD tools must be constrained for them to work with asynchronous circuits. Identification of these constraints and characterization flow to automatically derive the constraints is presented. The effect of the constraints on the designs and the way they are handled by the synchronous CAD tools are analyzed and reported in this work. The automation of the generation of asynchronous design templates and also the constraint generation is an important problem. Algorithms for automation of reset addition to asynchronous circuits and power and/or performance optimizations applied to the circuits using logical effort are explored thus filling an important hole in the automation flow. Constraints representing cyclic asynchronous circuits as directed acyclic graphs (DAGs) to the CAD tools is necessary for applying synchronous CAD optimizations like sizing, path delay optimizations and also using static timing analysis (STA) on these circuits. A thorough investigation for the requirements of cycle cutting while preserving timing paths is presented with an algorithm to automate the process of generating them. A large set of designs for 4 phase handshake protocol circuit implementations with early and late data validity are characterized for area, power and performance. Benchmark circuits with automated scripts to generate various configurations for better understanding of the designs are proposed and analyzed. Extension to the methodology like addition of scan insertion using automatic test pattern generation (ATPG) tools to add testability of datapath in bundled data asynchronous circuit implementations and timing closure approaches are also described. Energy, area, and performance of purely asynchronous circuits and circuits with mixed synchronous and asynchronous blocks are explored. Results indicate the benefits that can be derived by generating circuits with asynchronous components using this methodology

Clocked and asynchronous FIFO characterization and comparison

Journal ArticleHeterogeneous blocks, IP reuse, network-on-chip interconnect, and multi-frequency design are becoming more prevalent in integrated circuit design. Communication amongst these blocks typically employs first-in-first-out (FIFO) buffering for flow control. This paper characterizes and evaluates several common designs in order to determine which structure is best for various specific applications. Two clocked and four clockless asynchronous FIFO designs are compared varying capacity, bit width, and structural configurations. The FIFO layouts are characterized in the IBM 65nm 10sf process for latency, throughput, area, and power. First order models are created to aid in CAD for FIFO synthesis, modeling, and optimization. Comparative results show that the asynchronous designs uniformly out perform the clocked designs in nearly every aspect

Asynchronous techniques for system-on-chip design

SoC design will require asynchronous techniques as the large parameter variations across the chip will make it impossible to control delays in clock networks and other global signals efficiently. Initially, SoCs will be globally asynchronous and locally synchronous (GALS). But the complexity of the numerous asynchronous/synchronous interfaces required in a GALS will eventually lead to entirely asynchronous solutions. This paper introduces the main design principles, methods, and building blocks for asynchronous VLSI systems, with an emphasis on communication and synchronization. Asynchronous circuits with the only delay assumption of isochronic forks are called quasi-delay-insensitive (QDI). QDI is used in the paper as the basis for asynchronous logic. The paper discusses asynchronous handshake protocols for communication and the notion of validity/neutrality tests, and completion tree. Basic building blocks for sequencing, storage, function evaluation, and buses are described, and two alternative methods for the implementation of an arbitrary computation are explained. Issues of arbitration, and synchronization play an important role in complex distributed systems and especially in GALS. The two main asynchronous/synchronous interfaces needed in GALS-one based on synchronizer, the other on stoppable clock-are described and analyzed

Event-based Vision: A Survey

Event cameras are bio-inspired sensors that differ from conventional frame cameras: Instead of capturing images at a fixed rate, they asynchronously measure per-pixel brightness changes, and output a stream of events that encode the time, location and sign of the brightness changes. Event cameras offer attractive properties compared to traditional cameras: high temporal resolution (in the order of microseconds), very high dynamic range (140 dB vs. 60 dB), low power consumption, and high pixel bandwidth (on the order of kHz) resulting in reduced motion blur. Hence, event cameras have a large potential for robotics and computer vision in challenging scenarios for traditional cameras, such as low-latency, high speed, and high dynamic range. However, novel methods are required to process the unconventional output of these sensors in order to unlock their potential. This paper provides a comprehensive overview of the emerging field of event-based vision, with a focus on the applications and the algorithms developed to unlock the outstanding properties of event cameras. We present event cameras from their working principle, the actual sensors that are available and the tasks that they have been used for, from low-level vision (feature detection and tracking, optic flow, etc.) to high-level vision (reconstruction, segmentation, recognition). We also discuss the techniques developed to process events, including learning-based techniques, as well as specialized processors for these novel sensors, such as spiking neural networks. Additionally, we highlight the challenges that remain to be tackled and the opportunities that lie ahead in the search for a more efficient, bio-inspired way for machines to perceive and interact with the world

CAD Tools for Synthesis of Sleep Convention Logic

This dissertation proposes an automated flow for the Sleep Convention Logic (SCL) asynchronous design style. The proposed flow synthesizes synchronous RTL into an SCL netlist. The flow utilizes commercial design tools, while supplementing missing functionality using custom tools. A method for determining the performance bottleneck in an SCL design is proposed. A constraint-driven method to increase the performance of linear SCL pipelines is proposed. Several enhancements to SCL are proposed, including techniques to reduce the number of registers and total sleep capacitance in an SCL design

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability

Speck: A Smart event-based Vision Sensor with a low latency 327K Neuron Convolutional Neuronal Network Processing Pipeline

Edge computing solutions that enable the extraction of high level information from a variety of sensors is in increasingly high demand. This is due to the increasing number of smart devices that require sensory processing for their application on the edge. To tackle this problem, we present a smart vision sensor System on Chip (Soc), featuring an event-based camera and a low power asynchronous spiking Convolutional Neuronal Network (sCNN) computing architecture embedded on a single chip. By combining both sensor and processing on a single die, we can lower unit production costs significantly. Moreover, the simple end-to-end nature of the SoC facilitates small stand-alone applications as well as functioning as an edge node in a larger systems. The event-driven nature of the vision sensor delivers high-speed signals in a sparse data stream. This is reflected in the processing pipeline, focuses on optimising highly sparse computation and minimising latency for 9 sCNN layers to $3.36\mu s$. Overall, this results in an extremely low-latency visual processing pipeline deployed on a small form factor with a low energy budget and sensor cost. We present the asynchronous architecture, the individual blocks, the sCNN processing principle and benchmark against other sCNN capable processors

로직 및 피지컬 합성에서의 타이밍 분석과 최적화

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 김태환.Timing analysis is one of the necessary steps in the development of a semiconductor circuit. In addition, it is increasingly important in the advanced process technologies due to various factors, including the increase of process–voltage–temperature variation. This dissertation addresses three problems related to timing analysis and optimization in logic and physical synthesis. Firstly, most static timing analysis today are based on conventional fixed flip-flop timing models, in which every flip-flop is assumed to have a fixed clock-to-Q delay. However, setup and hold skews affect the clock-to-Q delay in reality. In this dissertation, I propose a mathematical formulation to solve the problem and apply it to the clock skew scheduling problems as well as to the analysis of a given circuit, with a scalable speedup technique. Secondly, near-threshold computing is one of the promising concepts for energy-efficient operation of VLSI systems, but wide performance variation and nonlinearity to process variations block the proliferation. To cope with this, I propose a holistic hardware performance monitoring methodology for accurate timing prediction in a near-threshold voltage regime and advanced process technology. Lastly, an asynchronous circuit is one of the alternatives to the conventional synchronous style, and asynchronous pipeline circuit especially attractive because of its small design effort. This dissertation addresses the synthesis problem of lightening two-phase bundled-data asynchronous pipeline controllers, in which delay buffers are essential for guaranteeing the correct handshaking operation but incurs considerable area increase.타이밍 분석은 반도체 회로 개발 필수 과정 중 하나로, 최신 공정일수록 공정-전압-온도 변이 증가를 포함한 다양한 요인으로 하여금 그 중요성이 커지고 있다. 본 논문에서는 로직 및 피지컬 합성과 관련하여 세 가지 타이밍 분석 및 최적화 문제에 대해 다룬다. 첫째로, 오늘날 대부분의 정적 타이밍 분석은 모든 플립-플롭의 클럭-출력 딜레이가 고정된 값이라는 가정을 바탕으로 이루어졌다. 하지만 실제 클럭-출력 딜레이는 해당 플립-플롭의 셋업 및 홀드 스큐에 영향을 받는다. 본 논문에서는 이러한 특성을 수학적으로 정리하였으며, 이를 확장 가능한 속도 향상 기법과 더불어 주어진 회로의 타이밍 분석 및 클럭 스큐 스케쥴링 문제에 적용하였다. 둘째로, 유사 문턱 연산은 초고집적 회로 동작의 에너지 효율을 끌어 올릴 수 있다는 점에서 각광받지만, 큰 폭의 성능 변이 및 비선형성 때문에 널리 활용되고 있지 않다. 이를 해결하기 위해 유사 문턱 전압 영역 및 최신 공정 노드에서 보다 정확한 타이밍 예측을 위한 하드웨어 성능 모니터링 방법론 전반을 제안하였다. 마지막으로, 비동기 회로는 기존 동기 회로의 대안 중 하나로, 그 중에서도 비동기 파이프라인 회로는 비교적 적은 설계 노력만으로도 구현 가능하다는 장점이 있다. 본 논문에서는 2위상 묶음 데이터 프로토콜 기반 비동기 파이프라인 컨트롤러 상에서, 정확한 핸드셰이킹 통신을 위해 삽입된 딜레이 버퍼에 의한 면적 증가를 완화할 수 있는 합성 기법을 제시하였다.1 INTRODUCTION 1 1.1 Flexible Flip-Flop Timing Model 1 1.2 Hardware Performance Monitoring Methodology 4 1.3 Asynchronous Pipeline Controller 10 1.4 Contributions of this Dissertation 15 2 ANALYSIS AND OPTIMIZATION CONSIDERING FLEXIBLE FLIP-FLOP TIMING MODEL 17 2.1 Preliminaries 17 2.1.1 Terminologies 17 2.1.2 Timing Analysis 20 2.1.3 Clock-to-Q Delay Surface Modeling 21 2.2 Clock-to-Q Delay Interval Analysis 22 2.2.1 Derivation 23 2.2.2 Additional Constraints 26 2.2.3 Analysis: Finding Minimum Clock Period 28 2.2.4 Optimization: Clock Skew Scheduling 30 2.2.5 Scalable Speedup Technique 33 2.3 Experimental Results 37 2.3.1 Application to Minimum Clock Period Finding 37 2.3.2 Application to Clock Skew Scheduling 39 2.3.3 Efficacy of Scalable Speedup Technique 43 2.4 Summary 44 3 HARDWARE PERFORMANCE MONITORING METHODOLOGY AT NTC AND ADVANCED TECHNOLOGY NODE 45 3.1 Overall Flow of Proposed HPM Methodology 45 3.2 Prerequisites to HPM Methodology 47 3.2.1 BEOL Process Variation Modeling 47 3.2.2 Surrogate Model Preparation 49 3.3 HPM Methodology: Design Phase 52 3.3.1 HPM2PV Model Construction 52 3.3.2 Optimization of Monitoring Circuits Configuration 54 3.3.3 PV2CPT Model Construction 58 3.4 HPM Methodology: Post-Silicon Phase 60 3.4.1 Transfer Learning in Silicon Characterization Step 60 3.4.2 Procedures in Volume Production Phase 61 3.5 Experimental Results 62 3.5.1 Experimental Setup 62 3.5.2 Exploration of Monitoring Circuits Configuration 64 3.5.3 Effectiveness of Monitoring Circuits Optimization 66 3.5.4 Considering BEOL PVs and Uncertainty Learning 68 3.5.5 Comparison among Different Prediction Flows 69 3.5.6 Effectiveness of Prediction Model Calibration 71 3.6 Summary 73 4 LIGHTENING ASYNCHRONOUS PIPELINE CONTROLLER 75 4.1 Preliminaries and State-of-the-Art Work 75 4.1.1 Bundled-data vs. Dual-rail Asynchronous Circuits 75 4.1.2 Two-phase vs. Four-phase Bundled-data Protocol 76 4.1.3 Conventional State-of-the-Art Pipeline Controller Template 77 4.2 Delay Path Sharing for Lightening Pipeline Controller Template 78 4.2.1 Synthesizing Sharable Delay Paths 78 4.2.2 Validating Logical Correctness for Sharable Delay Paths 80 4.2.3 Reformulating Timing Constraints of Controller Template 81 4.2.4 Minimally Allocating Delay Buffers 87 4.3 In-depth Pipeline Controller Template Synthesis with Delay Path Reusing 88 4.3.1 Synthesizing Delay Path Units 88 4.3.2 Validating Logical Correctness of Delay Path Units 89 4.3.3 Updating Timing Constraints for Delay Path Units 91 4.3.4 In-depth Synthesis Flow Utilizing Delay Path Units 95 4.4 Experimental Results 99 4.4.1 Environment Setup 99 4.4.2 Piecewise Linear Modeling of Delay Path Unit Area 99 4.4.3 Comparison of Power, Performance, and Area 102 4.5 Summary 107 5 CONCLUSION 109 5.1 Chapter 2 109 5.2 Chapter 3 110 5.3 Chapter 4 110 Abstract (In Korean) 127Docto