Accelerating legacy applications with spatial computing devices

Heterogeneous computing is the major driving factor in designing new energy-efficient high-performance computing systems. Despite the broad adoption of GPUs and other specialized architectures, the interest in spatial architectures like field-programmable gate arrays (FPGAs) has grown. While combining high performance, low power consumption and high adaptability constitute an advantage, these devices still suffer from a weak software ecosystem, which forces application developers to use tools requiring deep knowledge of the underlying system, often leaving legacy code (e.g., Fortran applications) unsupported. By realizing this, we describe a methodology for porting Fortran (legacy) code on modern FPGA architectures, with the target of preserving performance/power ratios. Aimed as an experience report, we considered an industrial computational fluid dynamics application to demonstrate that our methodology produces synthesizable OpenCL codes targeting Intel Arria10 and Stratix10 devices. Although performance gain is not far beyond that of the original CPU code (we obtained a relative speedup of x 0.59 and x 0.63, respectively, for a single optimized main kernel, while only on the Stratix10 we achieved x 2.56 by replicating the main optimized kernel 4 times), our results are quite encouraging to drawn the path for further investigations. This paper also reports some major criticalities in porting Fortran code on FPGA architectures

FPGA dynamic and partial reconfiguration : a survey of architectures, methods, and applications

Dynamic and partial reconfiguration are key differentiating capabilities of field programmable gate arrays (FPGAs). While they have been studied extensively in academic literature, they find limited use in deployed systems. We review FPGA reconfiguration, looking at architectures built for the purpose, and the properties of modern commercial architectures. We then investigate design flows, and identify the key challenges in making reconfigurable FPGA systems easier to design. Finally, we look at applications where reconfiguration has found use, as well as proposing new areas where this capability places FPGAs in a unique position for adoption

High Performance Computing via High Level Synthesis

As more and more powerful integrated circuits are appearing on the market, more and more applications, with very different requirements and workloads, are making use of the available computing power. This thesis is in particular devoted to High Performance Computing applications, where those trends are carried to the extreme. In this domain, the primary aspects to be taken into consideration are (1) performance (by definition) and (2) energy consumption (since operational costs dominate over procurement costs). These requirements can be satisfied more easily by deploying heterogeneous platforms, which include CPUs, GPUs and FPGAs to provide a broad range of performance and energy-per-operation choices. In particular, as we will see, FPGAs clearly dominate both CPUs and GPUs in terms of energy, and can provide comparable performance. An important aspect of this trend is of course design technology, because these applications were traditionally programmed in high-level languages, while FPGAs required low-level RTL design. The OpenCL (Open Computing Language) developed by the Khronos group enables developers to program CPU, GPU and recently FPGAs using functionally portable (but sadly not performance portable) source code which creates new possibilities and challenges both for research and industry. FPGAs have been always used for mid-size designs and ASIC prototyping thanks to their energy efficient and flexible hardware architecture, but their usage requires hardware design knowledge and laborious design cycles. Several approaches are developed and deployed to address this issue and shorten the gap between software and hardware in FPGA design flow, in order to enable FPGAs to capture a larger portion of the hardware acceleration market in data centers. Moreover, FPGAs usage in data centers is growing already, regardless of and in addition to their use as computational accelerators, because they can be used as high performance, low power and secure switches inside data-centers. High-Level Synthesis (HLS) is the methodology that enables designers to map their applications on FPGAs (and ASICs). It synthesizes parallel hardware from a model originally written C-based programming languages .e.g. C/C++, SystemC and OpenCL. Design space exploration of the variety of implementations that can be obtained from this C model is possible through wide range of optimization techniques and directives, e.g. to pipeline loops and partition memories into multiple banks, which guide RTL generation toward application dependent hardware and benefit designers from flexible parallel architecture of FPGAs. Model Based Design (MBD) is a high-level and visual process used to generate implementations that solve mathematical problems through a varied set of IP-blocks. MBD enables developers with different expertise, e.g. control theory, embedded software development, and hardware design to share a common design framework and contribute to a shared design using the same tool. Simulink, developed by MATLAB, is a model based design tool for simulation and development of complex dynamical systems. Moreover, Simulink embedded code generators can produce verified C/C++ and HDL code from the graphical model. This code can be used to program micro-controllers and FPGAs. This PhD thesis work presents a study using automatic code generator of Simulink to target Xilinx FPGAs using both HDL and C/C++ code to demonstrate capabilities and challenges of high-level synthesis process. To do so, firstly, digital signal processing unit of a real-time radar application is developed using Simulink blocks. Secondly, generated C based model was used for high level synthesis process and finally the implementation cost of HLS is compared to traditional HDL synthesis using Xilinx tool chain. Alternative to model based design approach, this work also presents an analysis on FPGA programming via high-level synthesis techniques for computationally intensive algorithms and demonstrates the importance of HLS by comparing performance-per-watt of GPUs(NVIDIA) and FPGAs(Xilinx) manufactured in the same node running standard OpenCL benchmarks. We conclude that generation of high quality RTL from OpenCL model requires stronger hardware background with respect to the MBD approach, however, the availability of a fast and broad design space exploration ability and portability of the OpenCL code, e.g. to CPUs and GPUs, motivates FPGA industry leaders to provide users with OpenCL software development environment which promises FPGA programming in CPU/GPU-like fashion. Our experiments, through extensive design space exploration(DSE), suggest that FPGAs have higher performance-per-watt with respect to two high-end GPUs manufactured in the same technology(28 nm). Moreover, FPGAs with more available resources and using a more modern process (20 nm) can outperform the tested GPUs while consuming much less power at the cost of more expensive devices

Methodology for complex dataflow application development

This thesis addresses problems inherent to the development of complex applications for reconfig- urable systems. Many projects fail to complete or take much longer than originally estimated by relying on traditional iterative software development processes typically used with conventional computers. Even though designer productivity can be increased by abstract programming and execution models, e.g., dataflow, development methodologies considering the specific properties of reconfigurable systems do not exist. The first contribution of this thesis is a design methodology to facilitate systematic develop- ment of complex applications using reconfigurable hardware in the context of High-Performance Computing (HPC). The proposed methodology is built upon a careful analysis of the original application, a software model of the intended hardware system, an analytical prediction of performance and on-chip area usage, and an iterative architectural refinement to resolve identi- fied bottlenecks before writing a single line of code targeting the reconfigurable hardware. It is successfully validated using two real applications and both achieve state-of-the-art performance. The second contribution extends this methodology to provide portability between devices in two steps. First, additional tool support for contemporary multi-die Field-Programmable Gate Arrays (FPGAs) is developed. An algorithm to automatically map logical memories to hetero- geneous physical memories with special attention to die boundaries is proposed. As a result, only the proposed algorithm managed to successfully place and route all designs used in the evaluation while the second-best algorithm failed on one third of all large applications. Second, best practices for performance portability between different FPGA devices are collected and evaluated on a financial use case, showing efficient resource usage on five different platforms. The third contribution applies the extended methodology to a real, highly demanding emerging application from the radiotherapy domain. A Monte-Carlo based simulation of dose accumu- lation in human tissue is accelerated using the proposed methodology to meet the real time requirements of adaptive radiotherapy.Open Acces

An FPGA implementation of an investigative many-core processor, Fynbos : in support of a Fortran autoparallelising software pipeline

Includes bibliographical references.In light of the power, memory, ILP, and utilisation walls facing the computing industry, this work examines the hypothetical many-core approach to finding greater compute performance and efficiency. In order to achieve greater efficiency in an environment in which Moore’s law continues but TDP has been capped, a means of deriving performance from dark and dim silicon is needed. The many-core hypothesis is one approach to exploiting these available transistors efficiently. As understood in this work, it involves trading in hardware control complexity for hundreds to thousands of parallel simple processing elements, and operating at a clock speed sufficiently low as to allow the efficiency gains of near threshold voltage operation. Performance is there- fore dependant on exploiting a new degree of fine-grained parallelism such as is currently only found in GPGPUs, but in a manner that is not as restrictive in application domain range. While removing the complex control hardware of traditional CPUs provides space for more arithmetic hardware, a basic level of control is still required. For a number of reasons this work chooses to replace this control largely with static scheduling. This pushes the burden of control primarily to the software and specifically the compiler, rather not to the programmer or to an application specific means of control simplification. An existing legacy tool chain capable of autoparallelising sequential Fortran code to the degree of parallelism necessary for many-core exists. This work implements a many-core architecture to match it. Prototyping the design on an FPGA, it is possible to examine the real world performance of the compiler-architecture system to a greater degree than simulation only would allow. Comparing theoretical peak performance and real performance in a case study application, the system is found to be more efficient than any other reviewed, but to also significantly under perform relative to current competing architectures. This failing is apportioned to taking the need for simple hardware too far, and an inability to implement static scheduling mitigating tactics due to lack of support for such in the compiler