A Multi-objective Perspective for Operator Scheduling using Fine-grained DVS Architecture

The stringent power budget of fine grained power managed digital integrated circuits have driven chip designers to optimize power at the cost of area and delay, which were the traditional cost criteria for circuit optimization. The emerging scenario motivates us to revisit the classical operator scheduling problem under the availability of DVFS enabled functional units that can trade-off cycles with power. We study the design space defined due to this trade-off and present a branch-and-bound(B/B) algorithm to explore this state space and report the pareto-optimal front with respect to area and power. The scheduling also aims at maximum resource sharing and is able to attain sufficient area and power gains for complex benchmarks when timing constraints are relaxed by sufficient amount. Experimental results show that the algorithm that operates without any user constraint(area/power) is able to solve the problem for most available benchmarks, and the use of power budget or area budget constraints leads to significant performance gain.Comment: 18 pages, 6 figures, International journal of VLSI design & Communication Systems (VLSICS

Dynamic Voltage Scaling Techniques for Energy Efficient Synchronized Sensor Network Design

Building energy-efficient systems is one of the principal challenges in wireless sensor networks. Dynamic voltage scaling (DVS), a technique to reduce energy consumption by varying the CPU frequency on the fly, has been widely used in other settings to accomplish this goal. In this paper, we show that changing the CPU frequency can affect timekeeping functionality of some sensor platforms. This phenomenon can cause an unacceptable loss of time synchronization in networks that require tight synchrony over extended periods, thus preventing all existing DVS techniques from being applied. We present a method for reducing energy consumption in sensor networks via DVS, while minimizing the impact of CPU frequency switching on time synchronization. The system is implemented and evaluated on a network of 11 Imote2 sensors mounted on a truss bridge and running a high-fidelity continuous structural health monitoring application. Experimental measurements confirm that the algorithm significantly reduces network energy consumption over the same network that does not use DVS, while requiring significantly fewer re-synchronization actions than a classic DVS algorithm.unpublishedis peer reviewe

MORA: an Energy-Aware Slack Reclamation Scheme for Scheduling Sporadic Real-Time Tasks upon Multiprocessor Platforms

In this paper, we address the global and preemptive energy-aware scheduling problem of sporadic constrained-deadline tasks on DVFS-identical multiprocessor platforms. We propose an online slack reclamation scheme which profits from the discrepancy between the worst- and actual-case execution time of the tasks by slowing down the speed of the processors in order to save energy. Our algorithm called MORA takes into account the application-specific consumption profile of the tasks. We demonstrate that MORA does not jeopardize the system schedulability and we show by performing simulations that it can save up to 32% of energy (in average) compared to execution without using any energy-aware algorithm.Comment: 11 page

Energy-Efficient Concurrency Control for Dynamic-Priority Real-Time Tasks with Abortable Critical Sections

In this paper, we are interested in energy-efficient concurrency control for real-time tasks on a non-ideal DVS processor. Based on well-known ceiling-based concurrency control protocols (such as priority ceiling protocol (PCP) and stack resource policy (SRP)), researchers have proposed energy-efficient approaches to mange concurrent accesses to shared resources so that the energy consumption can be reduced. However, ceiling-based protocols have a problem of ceiling blocking which imposes a great impact on the performance of real-time systems. In order to achieve sufficient performance, we propose a new protocol, called conditional abortable stack resource policy (CA-SRP), to resolve the ceiling blocking problem for dynamic-priority real-time tasks by incorporating a conditional abort rule into SRP. Based on the schedulability analysis of CA-SRP, we also propose a method, called dynamic speed assignment (DSA), to dynamically calculate and assign proper processor speeds for task execution so that the energy consumption can be reduced further. The capabilities of our proposed CA-SRP and DSA have been evaluated by a series of experiments, for which we have encouraging results

Dynamic voltage scaling algorithms for soft and hard real-time system

Dynamic Voltage Scaling (DVS) has not been investigated completely for further minimizing the energy consumption of microprocessor and prolonging the operational life of real-time systems. In this dissertation, the workload prediction based DVS and the offline convex optimization based DVS for soft and hard real-time systems are investigated, respectively. The proposed algorithms of soft and hard real-time systems are implemented on a small scaled wireless sensor network (WSN) and a simulation model, respectively

Rehabilitation of a water distribution system using sequential multiobjective optimization models

Identification of the optimal rehabilitation plan for a large water distribution system (WDS) with a substantial number of decision variables is a challenging task, especially when no supercomputer facilities are available. This paper presents an initiative methodology for the rehabilitation of WDS based on three sequential stages of multiobjective optimization models for gradually identifying the best-known Pareto front (PF). A two-objective optimization model is used in the first two stages where the objectives are to minimize rehabilitated infrastructure costs and operational costs. The optimization model in the first stage applies to a skeletonized WDS. The PFs obtained in Stage 1 are further improved in Stage 2 using the same two-objective optimization problem but for the full network. The third stage employs a three-objective optimization model by minimizing the cost of additional pressure reducing valves (PRVs) as the third objective. The suggested methodology was demonstrated through use of a real and large WDS from the literature. Results show the efficiency of the suggested methodology to achieve the optimal solutions for a large WDS in a reasonable computational time. Results also suggest the minimum total costs that will be obtained once maximum leakage reduction is achieved due to maximum possible pipeline rehabilitation without increasing the existing tanks

DYNAMIC VOLTAGE SCALING FOR PRIORITY-DRIVEN SCHEDULED DISTRIBUTED REAL-TIME SYSTEMS

Energy consumption is increasingly affecting battery life and cooling for real- time systems. Dynamic Voltage and frequency Scaling (DVS) has been shown to substantially reduce the energy consumption of uniprocessor real-time systems. It is worthwhile to extend the efficient DVS scheduling algorithms to distributed system with dependent tasks. The dissertation describes how to extend several effective uniprocessor DVS schedul- ing algorithms to distributed system with dependent task set. Task assignment and deadline assignment heuristics are proposed and compared with existing heuristics concerning energy-conserving performance. An admission test and a deadline com- putation algorithm are presented in the dissertation for dynamic task set to accept the arriving task in a DVS scheduled real-time system. Simulations show that an effective distributed DVS scheduling is capable of saving as much as 89% of energy that would be consumed without using DVS scheduling. It is also shown that task assignment and deadline assignment affect the energy- conserving performance of DVS scheduling algorithms. For some aggressive DVS scheduling algorithms, however, the effect of task assignment is negligible. The ad- mission test accept over 80% of tasks that can be accepted by a non-DVS scheduler to a DVS scheduled real-time system

Power-Aware Real-Time Scheduling upon Identical Multiprocessor Platforms

In this paper, we address the power-aware scheduling of sporadic constrained-deadline hard real-time tasks using dynamic voltage scaling upon multiprocessor platforms. We propose two distinct algorithms. Our first algorithm is an off-line speed determination mechanism which provides an identical speed for each processor. That speed guarantees that all deadlines are met if the jobs are scheduled using EDF. The second algorithm is an on-line and adaptive speed adjustment mechanism which reduces the energy consumption while the system is running.Comment: The manuscript corresponds to the final version of SUTC 2008 conferenc