194 research outputs found

    Timing synchronization in decode-and-forward cooperative communication systems

    Get PDF
    Cooperative communication systems have attracted much attention recently due to their desirable performance gain while using single antenna terminals. This paper addresses the joint timing and channel estimation problem, and furthermore the resynchronization of multiple timing offsets in a cooperative relay system. The estimations of timing and channel are conducted in two phases and the associated Cramér-Rao bounds (CRB) are derived for both phases. It is demonstrated that the conventional CRB is not valid for timing parameters under fading conditions, and a new bound called Weighted Bayesian CRB is proposed. With the timing and channel estimates, a general framework of the resynchronization filter design is developed in order to compensate the multiple timing offsets at the destination. The proposed methods are applied to different scenarios with varying degrees of timing misalignment and are numerically shown to provide excellent performances that approach the perfectly synchronized case. © 2009 IEEE.published_or_final_versio

    Exploiting Trust Degree for Multiple-Antenna User Cooperation

    Full text link
    For a user cooperation system with multiple antennas, we consider a trust degree based cooperation techniques to explore the influence of the trustworthiness between users on the communication systems. For the system with two communication pairs, when one communication pair achieves its quality of service (QoS) requirement, they can help the transmission of the other communication pair according to the trust degree, which quantifies the trustworthiness between users in the cooperation. For given trust degree, we investigate the user cooperation strategies, which include the power allocation and precoder design for various antenna configurations. For SISO and MISO cases, we provide the optimal power allocation and beamformer design that maximize the expected achievable rates while guaranteeing the QoS requirement. For a SIMO case, we resort to semidefinite relaxation (SDR) technique and block coordinate update (BCU) method to solve the corresponding problem, and guarantee the rank-one solutions at each step. For a MIMO case, as MIMO is the generalization of MISO and SIMO, the similarities among their problem structures inspire us to combine the methods from MISO and SIMO together to efficiently tackle MIMO case. Simulation results show that the trust degree information has a great effect on the performance of the user cooperation in terms of the expected achievable rate, and the proposed user cooperation strategies achieve high achievable rates for given trust degree.Comment: 15 pages,9 figures, to appear in IEEE Transactions on Wireless communication

    Performance of MIMO Relay DCSK-CD Systems over Nakagami Fading Channels

    Full text link
    A multi-access multiple-input multiple-output (MIMO) relay differential chaos shift keying cooperative diversity (DCSK-CD) system is proposed in this paper as a comprehensive cooperation scheme, in which the relay and destination both employ multiple antennas to strengthen the robustness against signal fading in a wireless network. It is shown that, with spatial diversity gains, the bit error rate (BER) performance of the proposed system is remarkably better than the conventional DCSK non-cooperation (DCSK-NC) and DCSK cooperative communication (DCSK-CC) systems. Moreover, the exact BER and close-form expressions of the proposed system are derived over Nakagami fading channels through the moment generating function (MGF), which is shown to be highly consistent with the simulation results. Meanwhile, this paper illustrates a trade-off between the performance and the complexity, and provides a threshold for the number of relay antennas keeping the user consumed energy constant. Due to the above-mentioned advantages, the proposed system stands out as a good candidate or alternative for energy-constrained wireless communications based on chaotic modulation, especially for low-power and low-cost wireless personal area networks (WPANs).Comment: 11 pages, 15 figures. IEEE Transactions on Circuits and System-

    Evaluation of Beamforming Algorithms for Massive MIMO

    Get PDF
    Massive MIMO relay system is an expansion of the Multiple-Input-Multiple-Output (MIMO) which enabled multiple users and antennas to communicate with each other for data sharing. A relay system with multiple antenna system has an advantage over simple MIMO system as it interconnects base station and users with each other for sharing of information and both BS and users are independent of many antennas. High data rate applications such as Machine-to-Machine communication and wireless sensor networks are experiencing transmit power loss, channel capacity and mismanagement of data. The demand for the Massive MIMO relay system is opening a door for ultra-high latency wireless network applications in case of saving transmit power and transmission of accurate information over the wireless networks. Due to the loss in transmit power and mismanagement of information over wireless networks, it is difficult to get better performance. Different approaches were made to optimize the overall transmit power of communication systems. One of the approaches was explained in this thesis work. The focus of the thesis is the use of beamforming algorithms named as Maximum Ratio Combining (MRC) and Zero-Forcing (ZF) to maximize the overall capacity of the MIMO system. These algorithms were evaluated on different scenarios to handle the performance and behavior with different network conditions. Various use cases were used for analyzing the beamforming algorithms. The performance of both algorithms was observed by considering the scenarios such as varying the transmit and receive antenna’s size and modulation schemes. Singular Value Decomposition (SVD) Method was used at the main MIMO channel to optimize the channel capacity. SVD divides the MIMO channel into different subchannels and optimizes the channel capacity of individual channels. The summary of results showed that MRC and ZF in the CP-OFDM environment when the number of RX antennas increased then they gave better BER performance as compared to the single antenna system. On the other hand, with higher modulation schemes efficiency was not good but with lower modulation scheme performance was satisfactory

    A Free Space Optic/Optical Wireless Communication: A Survey

    Get PDF
    The exponential demand for the next generation of services over free space optic and wireless optic communication is a necessity to approve new guidelines in this range. In this review article, we bring together an earlier study associated with these schemes to help us implement a multiple input/multiple output flexible platform for the next generation in an efficient manner. OWC/FSO is a complement clarification to radiofrequency technologies. Notably, they are providing various gains such as unrestricted authorizing, varied volume, essential safekeeping, and immunity to interference.

    The Role of Physical Layer Security in Satellite-Based Networks

    Full text link
    In the coming years, 6G will revolutionize the world with a large amount of bandwidth, high data rates, and extensive coverage in remote and rural areas. These goals can only be achieved by integrating terrestrial networks with non-terrestrial networks. On the other hand, these advancements are raising more concerns than other wireless links about malicious attacks on satellite-terrestrial links due to their openness. Over the years, physical layer security (PLS) has emerged as a good candidate to deal with security threats by exploring the randomness of wireless channels. In this direction, this paper reviews how PLS methods are implemented in satellite communications. Firstly, we discuss the ongoing research on satellite-based networks by highlighting the key points in the literature. Then, we revisit the research activities on PLS in satellite-based networks by categorizing the different system architectures. Finally, we highlight research directions and opportunities to leverage the PLS in future satellite-based networks

    Optimum Design of Spectral Efficient Green Wireless Communications

    Get PDF
    This dissertation focuses on the optimum design of spectral efficient green wireless communications. Energy efficiency (EE), which is defined as the inverse of average energy required to successfully deliver one information bit from a source to its destination, and spectral efficiency (SE), which is defined as the average data rate per unit bandwidth, are two fundamental performance metrics of wireless communication systems. We study the optimum designs of a wide range of practical wireless communication systems that can either maximize EE, or SE, or achieve a balanced tradeoff between the two metrics. There are three objectives in this dissertation. First, an accurate frame error rate (FER) expression is developed for practical coded wireless communication systems operating in quasi-static Rayleigh fading channels. The new FER expression enables the accurate modeling of EE and SE for various wireless communication systems. Second, the optimum designs of automatic repeat request (ARQ) and hybrid ARQ (HARQ) systems are performed to by using the EE and SE as design metrics. Specifically, a new metric of normalized EE, which is defined as the EE normalized by the SE, is proposed to achieve a balanced tradeoff between the EE and SE. Third, a robust frequency-domain on-off accumulative transmission (OOAT) scheme has been developed to achieve collision-tolerant media access control (CT-MAC) in a wireless network. The proposed frequency domain OOAT scheme can improve the SE and EE by allowing multiple users to transmit simultaneously over the same frequency bands, and the signal collisions at the receiver can be resolved by using signal processing techniques in the physical layer
    corecore