442 research outputs found
Inter-subnet localized mobility support for host identity protocol
Host identity protocol (HIP) has security support to enable secured mobility and multihoming, both of which are essential for future Internet applications. Compared to end host mobility and multihoming with HIP, existing HIP-based micro-mobility solutions have optimized handover performance by reducing location update delay. However, all these mobility solutions are client-based mobility solutions. We observe that another fundamental issue with end host mobility and multihoming extension for HIP and HIP-based micro-mobility solutions is that handover delay can be excessive unless the support for network-based micro-mobility is strengthened. In this study, we co-locate a new functional entity, subnet-rendezvous server, at the access routers to provide mobility to HIP host. We present the architectural elements of the framework and show through discussion and simulation results that our proposed scheme has achieved negligible handover latency and little packet loss
A Survey on Handover Management in Mobility Architectures
This work presents a comprehensive and structured taxonomy of available
techniques for managing the handover process in mobility architectures.
Representative works from the existing literature have been divided into
appropriate categories, based on their ability to support horizontal handovers,
vertical handovers and multihoming. We describe approaches designed to work on
the current Internet (i.e. IPv4-based networks), as well as those that have
been devised for the "future" Internet (e.g. IPv6-based networks and
extensions). Quantitative measures and qualitative indicators are also
presented and used to evaluate and compare the examined approaches. This
critical review provides some valuable guidelines and suggestions for designing
and developing mobility architectures, including some practical expedients
(e.g. those required in the current Internet environment), aimed to cope with
the presence of NAT/firewalls and to provide support to legacy systems and
several communication protocols working at the application layer
Efficient security for IPv6 multihoming
In this note, we propose a security mechanism for protecting IPv6
networks from possible abuses caused by the malicious usage of a
multihoming protocol. In the presented approach, each
multihomed node is assigned multiple prefixes from its upstream
providers, and it creates the interface identifier part of its
addresses by incorporating a cryptographic one-way hash of the
available prefix set. The result is that the addresses of each
multihomed node form an unalterable set of intrinsically bound
IPv6 addresses. This allows any node that is communicating with
the multihomed node to securely verify that all the alternative
addresses proposed through the multihoming protocol are
associated to the address used for establishing the communication.
The verification process is extremely efficient because it only
involves hash operationsPublicad
An Architecture for Network Layer Privacy
We present an architecture for the provision of network layer privacy based on the SHIM6 multihoming protocol. In its basic form, the architecture prevents on-path eavesdroppers from using SHIM6 network layer information to correlate packets that belong to the same communication but use different locators. To achieve this, several extensions to the SHIM6 protocol and to the HBA (Hash Based Addresses) addressing model are defined. On its full-featured mode of operation, hosts can vary dynamically the addresses of the packets of on-going communications. Single-homed hosts can adopt the SHIM6 protocol with the privacy enhancements to benefit from this protection against information collectors.IEEE Communications SocietyPublicad
Multi-homing tunnel broker
A proper support for communications has to provide fault tolerance capabilities such as the preservation of established connections in case of failures. Multihoming addresses this issue, but the currently available solution based in massive BGP route injection presents serious scalability limitations, since it contributes to the exponential growth of the BGP table size. An alternative solution based on the configuration of tunnels between the multihomed site exit routers and the ISP border routers has been proposed for IPv6 in RFC 3178. However, the amount of manual configuration imposed by this solution on the ISP side prevents its wide adoption. In particular, this solution requires at the ISP the manual configuration of a tunnel endpoint per each multihomed client that it serves. We present a multihoming tunnel broker (MHTB) that provides automatic creation of the tunnel endpoint at the ISP side.This work was supported by the SAM (Advanced Servers with Mobility)project, funded by the Spanish National research and Development Programme as TIC2002-04531-C04-03.Publicad
Recommended from our members
Heterogeneous Access: Survey and Design Considerations
As voice, multimedia, and data services are converging to IP, there is a need for a new networking architecture to support future innovations and applications. Users are consuming Internet services from multiple devices that have multiple network interfaces such as Wi-Fi, LTE, Bluetooth, and possibly wired LAN. Such diverse network connectivity can be used to increase both reliability and performance by running applications over multiple links, sequentially for seamless user experience, or in parallel for bandwidth and performance enhancements. The existing networking stack, however, offers almost no support for intelligently exploiting such network, device, and location diversity. In this work, we survey recently proposed protocols and architectures that enable heterogeneous networking support. Upon evaluation, we abstract common design patterns and propose a unified networking architecture that makes better use of a heterogeneous dynamic environment, both in terms of networks and devices. The architecture enables mobile nodes to make intelligent decisions about how and when to use each or a combination of networks, based on access policies. With this new architecture, we envision a shift from current applications, which support a single network, location, and device at a time to applications that can support multiple networks, multiple locations, and multiple devices
State-of-the-Art Multihoming Protocols and Support for Android
Il traguardo più importante per la connettività wireless del futuro sarà sfruttare appieno le potenzialità offerte da tutte le interfacce di rete dei dispositivi mobili. Per questo motivo con ogni probabilità il multihoming sarà un requisito obbligatorio per quelle applicazioni che puntano a fornire la migliore esperienza utente nel loro utilizzo. Sinteticamente è possibile definire il multihoming come quel processo complesso per cui un end-host o un end-site ha molteplici punti di aggancio alla rete. Nella pratica, tuttavia, il multihoming si è rivelato difficile da implementare e ancor di più da ottimizzare.
Ad oggi infatti, il multihoming è lontano dall’essere considerato una feature standard nel network deployment nonostante anni di ricerche e di sviluppo nel settore, poiché il relativo supporto da parte dei protocolli è quasi sempre del tutto inadeguato.
Naturalmente anche per Android in quanto piattaforma mobile più usata al mondo, è di fondamentale importanza supportare il multihoming per ampliare lo spettro delle funzionalità offerte ai propri utenti. Dunque alla luce di ciò, in questa tesi espongo lo stato dell’arte del supporto al multihoming in Android mettendo a confronto diversi protocolli di rete e testando la soluzione che sembra essere in assoluto la più promettente: LISP.
Esaminato lo stato dell’arte dei protocolli con supporto al multihoming e l’architettura software di LISPmob per Android, l’obiettivo operativo principale di questa ricerca è duplice: a) testare il roaming seamless tra le varie interfacce di rete di un dispositivo Android, il che è appunto uno degli obiettivi del multihoming, attraverso LISPmob; e b) effettuare un ampio numero di test al fine di ottenere attraverso dati sperimentali alcuni importanti parametri relativi alle performance di LISP per capire quanto è realistica la possibilità da parte dell’utente finale di usarlo come efficace soluzione multihoming
An API for IPv6 Multihoming
IFIP International Workshop on Networked Applications, Colmenarejo, Madrid/Spain, 6?8 July, 2005This paper proposes an API for Multihoming in IPv6. This API is based on the Hash Based Addresses and Cryptographically Generated Addresses approaches, which are being developed by the IETF multi6 Working Group. The support of Multihoming implies several actions such as failure detection procedures, reachability tests, re-homing procedures and exchange of locators. Applications can benefit from transparent access to Multihoming services only if per host Multihoming parameters are defined. However, more benefits could be obtained by applications if they will be able to configure these parameters. The proposed Multihoming API provides different functions to applications which can modify some parameters and invoke some functions related with the Multihoming Layer.Publicad
An API for IPv6 Multihoming based on HBA and CGA
EUNICE 2005. IFIP International Workshop on Networked Applications, Colmenarejo, Madrid/Spain, 6–8 July, 2005. (Proceedings of the 11th Open European Summer School EUNICE 2005: Networked Applications)This paper proposes an API for Multihoming in IPv6. This API is based on the Hash Based Addresses and Cryptographically Generated Addresses approaches, which are being developed by the IETF multi6 Working Group. The support of Multihoming implies several actions such as failure detection procedures, reachability tests, re-homing procedures and exchange of locators. Applications can benefit from transparent access to Multihoming services only if per host Multihoming parameters are defined. However, more benefits could be obtained by applications if they will be able to configure these parameters. The proposed Multihoming API provides different functions to applications which can modify some parameters and invoke some functions related with the Multihoming Layer.This work has been partly supported by the European Union under the E-Next Project FP6506869 and by OPTINET6 project TIC-2003-09042-C03-01
- …