Design of Low-Voltage Digital Building Blocks and ADCs for Energy-Efficient Systems

Increasing number of energy-limited applications continue to drive the demand for designing systems with high energy efficiency. This tutorial covers the main building blocks of a system implementation including digital logic, embedded memories, and analog-to-digital converters and describes the challenges and solutions to designing these blocks for low-voltage operation

Design and Analysis of Robust Low Voltage Static Random Access Memories.

Static Random Access Memory (SRAM) is an indispensable part of most modern VLSI designs and dominates silicon area in many applications. In scaled technologies, maintaining high SRAM yield becomes more challenging since they are particularly vulnerable to process variations due to 1) the minimum sized devices used in SRAM bitcells and 2) the large array sizes. At the same time, low power design is a key focus throughout the semiconductor industry. Since low voltage operation is one of the most effective ways to reduce power consumption due to its quadratic relationship to energy savings, lowering the minimum operating voltage (Vmin) of SRAM has gained significant interest. This thesis presents four different approaches to design and analyze robust low voltage SRAM: SRAM analysis method improvement, SRAM bitcell development, SRAM peripheral optimization, and advance device selection. We first describe a novel yield estimation method for bit-interleaved voltage-scaled 8-T SRAMs. Instead of the traditional trade-off between write and read, the trade-off between write and half select disturb is analyzed. In addition, this analysis proposes a method to find an appropriate Write Word-Line (WWL) pulse width to maximize yield. Second, low leakage 10-T SRAM with speed compensation scheme is proposed. During sleep mode of a sensor application, SRAM retaining data cannot be shut down so it is important to minimize leakage in SRAM. This work adopts several leakage reduction techniques while compensating performance. Third, adaptive write architecture for low voltage 8-T SRAMs is proposed. By adaptively modulating WWL width and voltage level, it is possible to achieve low power consumption while maintaining high yield without excessive performance degradation. Finally, low power circuit design based on heterojunction tunneling transistors (HETTs) is discussed. HETTs have a steep subthreshold swing beneficial for low voltage operation. Device modeling and design of logic and SRAM are proposed.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91569/1/daeyeonk_1.pd

Yield-Aware Leakage Power Reduction of On-Chip SRAMs

Leakage power dissipation of on-chip static random access memories (SRAMs) constitutes a significant fraction of the total chip power consumption in state-of-the-art microprocessors and system-on-chips (SoCs). Scaling the supply voltage of SRAMs during idle periods is a simple yet effective technique to reduce their leakage power consumption. However, supply voltage scaling also results in the degradation of the cells’ robustness, and thus reduces their capability to retain data reliably. This is particularly resulting in the failure of an increasing number of cells that are already weakened by excessive process parameters variations and/or manufacturing imperfections in nano-meter technologies. Thus, with technology scaling, it is becoming increasingly challenging to maintain the yield while attempting to reduce the leakage power of SRAMs. This research focuses on characterizing the yield-leakage tradeoffs and developing novel techniques for a yield-aware leakage power reduction of SRAMs. We first demonstrate that new fault behaviors emerge with the introduction of a low-leakage standby mode to SRAMs. In particular, it is shown that there are some types of defects in SRAM cells that start to cause failures only when the drowsy mode is activated. These defects are not sensitized in the active operating mode, and thus escape the traditional March tests. Fault models for these newly observed fault behaviors are developed and described in this thesis. Then, a new low-complexity test algorithm, called March RAD, is proposed that is capable of detecting all the drowsy faults as well as the simple traditional faults. Extreme process parameters variations can also result in SRAM cells with very weak data-retention capability. The probability of such cells may be very rare in small memory arrays, however, in large arrays, their probability is magnified by the huge number of bit-cells integrated on a single chip. Hence, it is critical also to account for such extremal events while attempting to scale the supply voltage of SRAMs. To estimate the statistics of such rare events within a reasonable computational time, we have employed concepts from extreme value theory (EVT). This has enabled us to accurately model the tail of the cell failure probability distribution versus the supply voltage. Analytical models are then developed to characterize the yield-leakage tradeoffs in large modern SRAMs. It is shown that even a moderate scaling of the supply voltage of large SRAMs can potentially result in significant yield losses, especially in processes with highly fluctuating parameters. Thus, we have investigated the application of fault-tolerance techniques for a more efficient leakage reduction of SRAMs. These techniques allow for a more aggressive voltage scaling by providing tolerance to the failures that might occur during the sleep mode. The results show that in a 45-nm technology, assuming 10% variation in transistors threshold voltage, repairing a 64KB memory using only 8 redundant rows or incorporating single error correcting codes (ECCs) allows for ~90% leakage reduction while incurring only ~1% yield loss. The combination of redundancy and ECC, however, allows to reach the practical limits of leakage reduction in the analyzed benchmark, i.e., ~95%. Applying an identical standby voltage to all dies, regardless of their specific process parameters variations, can result in too many cell failures in some dies with heavily skewed process parameters, so that they may no longer be salvageable by the employed fault-tolerance techniques. To compensate for the inter-die variations, we have proposed to tune the standby voltage of each individual die to its corresponding minimum level, after manufacturing. A test algorithm is presented that can be used to identify the minimum applicable standby voltage to each individual memory die. A possible implementation of the proposed tuning technique is also demonstrated. Simulation results in a 45-nm predictive technology show that tuning standby voltage of SRAMs can enhance data-retention yield by an additional 10%−50%, depending on the severity of the variations

SRAM Read-Assist Scheme for Low Power High Performance Applications

Semiconductor technology scaling resulted in a considerable reduction in the transistor cost and an astonishing enhancement in the performance of VLSI (very large scale integration) systems. These nanoscale technologies have facilitated integration of large SRAMs which are now very popular for both processors and system-on-chip (SOC) designs. The density of SRAM array had a quadratic increase with each generation of CMOS technology. However, these nanoscale technologies unveiled few significant challenges to the design of high performance and low power embedded memories. First, process variation has become more significant in these technologies which threaten reliability of sensing circuitry. In order to alleviate this problem, we need to have larger signal swings on the bitlines (BLs) which degrade speed as well as power dissipation. The second challenge is due to the variation in the cell current which will reduce the worst case cell current. Since this cell current is responsible for discharging BLs, this problem will translate to longer activation time for the wordlines (WLs). The longer the WL pulse width is, the more likely is the cell to be unstable. A long WL pulse width can also degrade noise margin. Furthermore, as a result of continuous increase in the size of SRAMs, the BL capacitance has increased significantly which will deteriorate speed as well as power dissipation. The aforementioned problems require additional techniques and treatment such as read-assist techniques to insure fast, low power and reliable read operation in nanoscaled SRAMs. In this research we address these concerns and propose a read-assist sense amplifier (SA) in 65nm CMOS technology that expedites the process of developing differential voltage to be sensed by sense amplifier while reducing voltage swing on the BLs which will result in increased sensing speed, lower power and shorter WL activation time. A complete comparison is made between the proposed scheme, conventional SA and a state of the art design which shows speed improvement and power reduction of 56.1% and 25.9%, respectively over the conventional scheme at the expense of negligible area overhead. Also, the proposed scheme enables us to reduce cell VDD for having the same sensing speed which results in considerable reduction in leakage power dissipation

Embracing Low-Power Systems with Improvement in Security and Energy-Efficiency

As the economies around the world are aligning more towards usage of computing systems, the global energy demand for computing is increasing rapidly. Additionally, the boom in AI based applications and services has already invited the pervasion of specialized computing hardware architectures for AI (accelerators). A big chunk of research in the industry and academia is being focused on providing energy efficiency to all kinds of power hungry computing architectures. This dissertation adds to these efforts. Aggressive voltage underscaling of chips is one the effective low power paradigms of providing energy efficiency. This dissertation identifies and deals with the reliability and performance problems associated with this paradigm and innovates novel energy efficient approaches. Specifically, the properties of a low power security primitive have been improved and, higher performance has been unlocked in an AI accelerator (Google TPU) in an aggressively voltage underscaled environment. And, novel power saving opportunities have been unlocked by characterizing the usage pattern of a baseline TPU with rigorous mathematical analysis

Ultra-low Voltage Digital Circuits and Extreme Temperature Electronics Design

Certain applications require digital electronics to operate under extreme conditions e.g., large swings in ambient temperature, very low supply voltage, high radiation. Such applications include sensor networks, wearable electronics, unmanned aerial vehicles, spacecraft, and energyharvesting systems. This dissertation splits into two projects that study digital electronics supplied by ultra-low voltages and build an electronic system for extreme temperatures. The first project introduces techniques that improve circuit reliability at deep subthreshold voltages as well as determine the minimum required supply voltage. These techniques address digital electronic design at several levels: the physical process, gate design, and system architecture. This dissertation analyzes a silicon-on-insulator process, Schmitt-trigger gate design, and asynchronous logic at supply voltages lower than 100 millivolts. The second project describes construction of a sensor digital controller for the lunar environment. Parts of the digital controller are an asynchronous 8031 microprocessor that is compatible with synchronous logic, memory with error detection and correction, and a robust network interface. The digitial sensor ASIC is fabricated on a silicon-germanium process and built with cells optimized for extreme temperatures

Novel High Performance Ultra Low Power Static Random Access Memories (SRAMs) Based on Next Generation Technologies

Title from PDF of title page viewed January 27, 2021Dissertation advisor: Masud H. ChowdhuryVitaIncludes bibliographical references (page 107-120)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019Next Big Thing Is Surely Small: Nanotechnology Can Bring Revolution. Nanotechnology leads the world towards many new applications in various fields of computing, communication, defense, entertainment, medical, renewable energy and environment. These nanotechnology applications require an energy-efficient memory system to compute and process. Among all the memories, Static Random Access Memories (SRAMs) are high performance memories and occupies more than 50% of any design area. Therefore, it is critical to design high performance and energy-efficient SRAM design. Ultra low power and high speed applications require a new generation memory capable of operating at low power as well as low execution time. In this thesis, a novel 8T SRAM design is proposed that offers significantly faster access time and lowers energy consumption along with better read stability and write ability. The proposed design can be used in the conventional SRAM as well as in computationally intensive applications like neural networks and machine learning classifiers [1]-[4]. Novel 8T SRAM design offers higher energy efficiency, reliability, robustness and performance compared to the standard 6T and other existing 8T and 9T designs. It offers the advantages of a 10T SRAM without the additional area, delay and power overheads of the 10T SRAM. The proposed 8T SRAM would be able to overcome many other limitations of the conventional 6T and other 7T, 8T and 9T designs. The design employs single bitline for the write operation, therefore the number of write drivers are reduced. The defining feature of the proposed 8T SRAM is its hybrid design, which is the combination of two techniques: (i) the utilization of single-ended bitline and (ii) the utilization of virtual ground. The single-ended bitline technique ensures separate read and write operations, which eventually reduces the delay and power consumption during the read and write operations. It's independent read and write paths allow the use of the minimum sized access transistors and aid in a disturb-free read operation. The virtual ground weakens the positive feedback in the SRAM cell and improves its write ability. The virtual ground technique is also used to reduce leakages. The proposed design does not require precharging the bitlines for the read operation, which reduces the area and power overheads of the memory system by eliminating the precharging circuit. The design isolates the storage node from the read path, which improves the read stability. For reliability study, we have investigated the static noise margin (SNM) of the proposed 8T SRAM, for which, we have used two methods – (i) the traditional SNM method with the butterfly curve, (ii) the N-curve method A comparative analysis is performed between the proposed and the existing SRAM designs in terms of area, total power consumption during the read and write operations, and stability and reliability. All these advantages make the proposed 8T SRAM design an ideal candidate for the conventional and computationally intensive applications like machine learning classifier and deep learning neural network. In addition to this, there is need for next generation technologies to design SRAM memory because the conventional CMOS technology is approaching its physical and performance boundaries and as a consequence, becoming incompatible with ultra-low-power applications. Emerging devices such as Tunnel Field Effect Transistor (TFET)) and Graphene Nanoribbon Field Effect Transistor (GNRFET) devices are highly potential candidates to overcome the limitations of MOSFET because of their ability to achieve subthreshold slopes below 60 mV/decade and very low leakage currents [6]-[9]. This research also explores novel TFET and GNRFET based 6T SRAM. The thesis evaluates the standby leakage power in the Tunnel FET (TFET) based 6T SRAM cell for different pull-up, pull-down, and pass-gate transistors ratios (PU: PD: PG) and compared to 10nm FinFET based 6T SRAM designs. It is observed that the 10nm TFET based SRAMs have 107.57%, 163.64%, and 140.44% less standby leakage power compared to the 10nm FinFET based SRAMs when the PU: PD: PG ratios are 1:1:1, 1:5:2 and 2:5:2, respectively. The thesis also presents an analysis of the stability and reliability of sub-10nm TFET based 6T SRAM circuit with a reduced supply voltage of 500mV. The static noise margin (SNM), which is a critical measure of SRAM stability and reliability, is determined for hold, read and write operations of the 6T TFET SRAM cell. The robustness of the optimized TFET based 6T SRAM circuit is also evaluated at different supply voltages. Simulations were done in HSPICE and Cadence tools. From the analysis, it is clear that the main advantage of the TFET based SRAM would be the significant improvement in terms of leakage or standby power consumption. Compared to the FinFET based SRAM the standby leakage power of the T-SRAMs are 107.57%, 163.64%, and 140.44% less for 1:1:1, 1:5:2 and 2:5:2 configurations, respectively. Since leakage/standby power is the primary source of power consumption in the SRAM, and the overall system energy efficiency depends on SRAM power consumption, TFET based SRAM would lead to massive improvement of the energy efficiency of the system. Therefore, T-SRAMs are more suitable for ultra-low power applications. In addition to this, the thesis evaluates the standby leakage power of types of Graphene Nanoribbon FETs based 6T SRAM bitcell and compared to 10nm FinFET based 6T SRAM bitcell. It is observed that the 10nm MOS type GNRFET based SRAMs have 16.43 times less standby leakage power compared to the 10nm FinFET based SRAMs. The double gate SB-GNRFET based SRAM consumes 1.35E+03 times less energy compared to the 10nm FinFET based SRAM during write. However, during read double gate SB-GNRFET based SRAM consume 15 times more energy than FinFET based SRAM. It is also observed that GNRFET based SRAMs are more stable and reliable than FinFET based SRAM.Introduction -- Background -- Novel High Performance Ultra Low Power SRAM Design -- Tunnel FET Based SRAM Design -- Graphene Nanoribbon FET Based SRAM Design -- Double-gate FDSOI Based SRAM Designs -- Novel CNTFET and MEMRISTOR Based Digital Designs -- Conclusio

Techniques for Aging, Soft Errors and Temperature to Increase the Reliability of Embedded On-Chip Systems

This thesis investigates the challenge of providing an abstracted, yet sufficiently accurate reliability estimation for embedded on-chip systems. In addition, it also proposes new techniques to increase the reliability of register files within processors against aging effects and soft errors. It also introduces a novel thermal measurement setup that perspicuously captures the infrared images of modern multi-core processors