Algorithms and Circuits for Analog-Digital Hybrid Multibeam Arrays

Fifth generation (5G) and beyond wireless communication systems will rely heavily on larger antenna arrays combined with beamforming to mitigate the high free-space path-loss that prevails in millimeter-wave (mmW) and above frequencies. Sharp beams that can support wide bandwidths are desired both at the transmitter and the receiver to leverage the glut of bandwidth available at these frequency bands. Further, multiple simultaneous sharp beams are imperative for such systems to exploit mmW/sub-THz wireless channels using multiple reflected paths simultaneously. Therefore, multibeam antenna arrays that can support wider bandwidths are a key enabler for 5G and beyond systems. In general, N-beam systems using N-element antenna arrays will involve circuit complexities of the order of N2. This dissertation investigates new analog, digital and hybrid low complexity multibeam beamforming algorithms and circuits for reducing the associated high size, weight, and power (SWaP) complexities in larger multibeam arrays. The research efforts on the digital beamforming aspect propose the use of a new class of discrete Fourier transform (DFT) approximations for multibeam generation to eliminate the need for digital multipliers in the beamforming circuitry. For this, 8-, 16- and 32-beam multiplierless multibeam algorithms have been proposed for uniform linear array applications. A 2.4 GHz 16-element array receiver setup and a 5.8 GHz 32-element array receiver system which use field programmable gate arrays (FPGAs) as digital backend have been built for real-time experimental verification of the digital multiplierless algorithms. The multiplierless algorithms have been experimentally verified by digitally measuring beams. It has been shown that the measured beams from the multiplierless algorithms are in good agreement with the exact counterpart algorithms. Analog realizations of the proposed approximate DFT transforms have also been investigated leading to low-complex, high bandwidth circuits in CMOS. Further, a novel approach for reducing the circuit complexity of analog true-time delay (TTD) N-beam beamforming networks using N-element arrays has been proposed for wideband squint-free operation. A sparse factorization of the N-beam delay Vandermonde beamforming matrix is used to reduce the total amount of TTD elements that are needed for obtaining N number of beams in a wideband array. The method has been verified using measured responses of CMOS all-pass filters (APFs). The wideband squint-free multibeam algorithm is also used to propose a new low-complexity hybrid beamforming architecture targeting future 5G mmW systems. Apart from that, the dissertation also explores multibeam beamforming architectures for uniform circular arrays (UCAs). An algorithm having N log N circuit complexity for simultaneous generation of N-beams in an N-element UCA is explored and verified

Real-Time Narrowband and Wideband Beamforming Techniques for Fully-Digital RF Arrays

Elemental digital beamforming offers increased flexibility for multi-function radio frequency (RF) systems supporting radar and communications applications. As fully digital arrays, components, and subsystems are becoming more affordable in the military and commercial industries, analog components such as phase shifters, filters, and mixers have begun to be replaced by digital circuits which presents efficiency challenges in power constrained scenarios. Furthermore, multi-function radar and communications systems are exploiting the multiple simultaneous beam capability provided by digital at every element beamforming. Along with further increasing data samples rates and increasing instantaneous bandwidths (IBW), real time processing in the digital domain has become a challenge due to the amount of data produced and processed in current systems. These arrays generate hundreds of gigabits per second of data throughput or more which is costly to send off-chip to an adjunct processor fundamentally limiting the overall performance of an RF array system. In this dissertation, digital filtering techniques and architectures are described which calibrate and beamform both narrowband and wideband RF arrays on receive. The techniques are shown to optimize one or many parameters of the digital transceiver system to improve the overall system efficiency. Digitally beamforming in the beamspace is shown to further increase the processing efficiency of an adaptive system compared to state of the art frequency domain approaches by minimizing major processing bottlenecks of generating adaptive filter coefficients. The techniques discussed are compared and contrasted across different hardware processor modules including field-programmable gate arrays (FPGAs), graphical processing units (GPUs), and central processing units (CPUs)

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics

Communication Platform Payload Definition (CPPD) study. Volume 2: Technical report

This is Volume 2 (Technical Report) of the Ford Aerospace & Communications Corporation Final Report for the Communication Platform Payload Definition (CPPD) Study program conducted for NASA Lewis Research Center under contract No. NAS3-24235. This report presents the results of the study effort leading to five potential platform payloads to service CONUS and WARC Region 2 traffic demand as projected to the year 2008. The report addresses establishing the data bases, developing service aggregation scenarios, selecting and developing 5 payload concepts, performing detailed definition of the 5 payloads, costing them, identifying critical technology, and finally comparing the payloads with each other and also with non-aggregated equivalent services

The Telecommunications and Data Acquisition

This quarterly publication provides archival reports on developments in programs managed by JPL's Office of Telecommunications and Data Acquisition (TDA). In space communications, radio navigation, radio science, and ground-based radio and radar astronomy, it reports on activities of the Deep Space Network (DSN) in planning, supporting research and technology, implementation, and operations. Also included are standards activity at JPL for space data and information systems and reimbursable DSN work performed for other space agencies through NASA. The preceding work is all performed for NASA's Office of Space Communications (OSC)

Simultaneous Multispectral Imaging: Using Multiview Computational Compressive Sensing

Multispectral imaging is traditionally performed using a combination of an imaging device with a filter bank such as a filter wheel or a form of tunable filter, or a combination of many imaging devices with various spectral beam splitting optics. The complexity and size of these devices seem to be the limiting factor of their adoption and use in various fields that could potentially benefit from this imaging modality. With the advent of nanophotonics, there has been a surge in single camera, snapshot, multispectral imaging exploiting the capabilities of nanotechnology to devise pixel-based spectral filters. This new form of sensing, which can be classified as compressive sensing, has its limitations. One example is the laborious process of fabricating the filter bank and installing it into a detector since the detector fabrication process is completely removed from the filter fabrication process. The work presented here will describe an optical design that would enable a single-camera, simultaneous multispectral imaging via multiview computational compressive sensing. A number of points-of-view (POVs) of the field-of-view (FOV) of the camera are generated and directed through an assortment of spectral pre-filters en route to the camera. The image of each of the POVs is then captured on a different spatial location on the detector. With the spectral response of the detector pixels well characterized, spatial and spectral compressive sensing is performed as the images are recorded. Various computational techniques are used in this work which would: register the images captured from multiple views resulting in even more sparsely sensed images; perform spatial interpolation of the sparsely sampled spectral images; implement hyper-focusing of the images from all POVs captured as some defocusing will happen as the result of the discrepancy in the optical paths in each view; execute numerical dimensionality reduction analysis to extract information from the multispectral images. The spectral imaging capabilities of the device are tested with a collection of fluorescent microspheres. The spectral sensing capability of the device is examined by measuring the fluorescent spectra of adulterated edible oils and demonstrating the ability of the imaging system to differentiate between various types of oil as well as various levels of contamination. Lastly, the system is used to scrutinize samples of black ink from different pen manufacturers, and is able to discriminate between the different inks

Proceedings of the Third International Mobile Satellite Conference (IMSC 1993)

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial cellular communications services. While the first and second International Mobile Satellite Conferences (IMSC) mostly concentrated on technical advances, this Third IMSC also focuses on the increasing worldwide commercial activities in Mobile Satellite Services. Because of the large service areas provided by such systems, it is important to consider political and regulatory issues in addition to technical and user requirements issues. Topics covered include: the direct broadcast of audio programming from satellites; spacecraft technology; regulatory and policy considerations; advanced system concepts and analysis; propagation; and user requirements and applications

Future payload technology requirements study

Technology advances needed for an overall mission model standpoint as well as those for individual shuttle payloads are defined. The technology advances relate to the mission scientific equipment, spacecraft subsystems that functionally support this equipment, and other payload-related equipment, software, and environment necessary to meet broad program objectives. In the interest of obtaining commonality of requirements, the study was structured according to technology categories rather than in terms of individual payloads