Novel linear and nonlinear optical signal processing for ultra-high bandwidth communications

The thesis is articulated around the theme of ultra-wide bandwidth single channel signals. It focuses on the two main topics of transmission and processing of information by techniques compatible with high baudrates. The processing schemes introduced combine new linear and nonlinear optical platforms such as Fourier-domain programmable optical processors and chalcogenide chip waveguides, as well as the concept of neural network. Transmission of data is considered in the context of medium distance links of Optical Time Division Multiplexed (OTDM) data subject to environmental fluctuations. We experimentally demonstrate simultaneous compensation of differential group delay and multiple orders of dispersion at symbol rates of 640 Gbaud and 1.28 Tbaud. Signal processing at high bandwidth is envisaged both in the case of elementary post-transmission analog error mitigation and in the broader field of optical computing for high level operations (“optical processor”). A key innovation is the introduction of a novel four-wave mixing scheme implementing a dot-product operation between wavelength multiplexed channels. In particular, it is demonstrated for low-latency hash-key based all-optical error detection in links encoded with advanced modulation formats. Finally, the work presents groundbreaking concepts for compact implementation of an optical neural network as a programmable multi-purpose processor. The experimental architecture can implement neural networks with several nodes on a single optical nonlinear transfer function implementing functions such as analog-to-digital conversion. The particularity of the thesis is the new approaches to optical signal processing that potentially enable high level operations using simple optical hardware and limited cascading of components

Experimental Evaluation and Comparison of Time-Multiplexed Multi-FPGA Routing Architectures

Emulating large complex designs require multi-FPGA systems (MFS). However, inter-FPGA communication is confronted by the challenge of lack of interconnect capacity due to limited number of FPGA input/output (I/O) pins. Serializing parallel signals onto a single trace effectively addresses the limited I/O pin obstacle. Besides the multiplexing scheme and multiplexing ratio (number of inter-FPGA signals per trace), the choice of the MFS routing architecture also affect the critical path latency. The routing architecture of an MFS is the interconnection pattern of FPGAs, fixed wires and/or programmable interconnect chips. Performance of existing MFS routing architectures is also limited by off-chip interface selection. In this dissertation we proposed novel 2D and 3D latency-optimized time-multiplexed MFS routing architectures. We used rigorous experimental approach and real sequential benchmark circuits to evaluate and compare the proposed and existing MFS routing architectures. This research provides a new insight into the encouraging effects of using off-chip optical interface and three dimensional MFS routing architectures. The vertical stacking results in shorter off-chip links improving the overall system frequency with the additional advantage of smaller footprint area. The proposed 3D architectures employed serialized interconnect between intra-plane and inter-plane FPGAs to address the pin limitation problem. Additionally, all off-chip links are replaced by optical fibers that exhibited latency improvement and resulted in faster MFS. Results indicated that exploiting third dimension provided latency and area improvements as compared to 2D MFS. We also proposed latency-optimized planar 2D MFS architectures in which electrical interconnections are replaced by optical interface in same spatial distribution. Performance evaluation and comparison showed that the proposed architectures have reduced critical path delay and system frequency improvement as compared to conventional MFS. We also experimentally evaluated and compared the system performance of three inter-FPGA communication schemes i.e. Logic Multiplexing, SERDES and MGT in conjunction with two routing architectures i.e. Completely Connected Graph (CCG) and TORUS. Experimental results showed that SERDES attained maximum frequency than the other two schemes. However, for very high multiplexing ratios, the performance of SERDES & MGT became comparable

NASA Tech Briefs, August 1996

Topics covered include: Graphics and Simulation; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Report

Development of high-performance quantum dot mode-locked optical frequency comb

This PhD thesis focus on the development of high-performance optical frequency combs (OFCs) generated by two-section passively mode-locked lasers (MLLs) based on novel optimised InAs quantum dot (QD) structures grown on GaAs substrates. Throughout the thesis, several important aspects are covered: the epitaxial structures, the device designs, the fabrication process, the characterisation of the fabricated laser devices and the evaluation of their performance. To gain a deep level comprehension of the mode-locking mechanisms in two-section QD MLLs, a detailed study is presented on a series of QD MLLs with different saturable absorber (SA) to gain section length ratios (from 1: 3 to 1: 7) in either ridged-waveguide structure or tapered waveguide structure. The effect of temperature on different device configurations is experimentally examined. And the data transmission capability of the QD MLLs is systematically investigated in different scenarios. In this thesis, an ultra-stable 25.5 GHz QD mode-locked OFC source emitted solely from the QD ground state from 20 °C to a world record 120 °C with only 0.07 GHz tone spacing variation has been demonstrated. Meanwhile, a passively QD MLL with 100 GHz fundamental repetition rate is developed for the first time, enabling 128 Gbit s−1 λ−1 PAM4 optical transmission and 64 Gbit s−1 λ−1 NRZ optical transmission through 5-km SSMF and 2-m free-space, respectively. All of the studies aim to prove that our two-section passively InAs QD MLLs can be used as simple, compact, easy-to-operate, and power-efficient multi-wavelength OFC sources for future high-speed and large-capacity optical communications

Characterisation of a reconfigurable free space optical interconnect system for parallel computing applications and experimental validation using rapid prototyping technology

Free-space optical interconnects (FSOIs) are widely seen as a potential solution to present and future bandwidth bottlenecks for parallel processing applications. This thesis will be focused on the study of a particular FSOI system called Optical Highway (OH). The OH is a polarised beam routing system which uses Polarising Beam Splitters and Liquid Crystals (PBS/LC) assemblies to perform reconfigurable interconnection networks. The properties of the OH make it suitable for implementing different passive static networks. A technology known as Rapid Prototyping (RP) will be employed for the first time in order to create optomechanical structures at low cost and low production times. Off-theshelf optical components will also be characterised in order to implement the OH. Additionally, properties such as reconfigurability, scalability, tolerance to misalignment and polarisation losses will be analysed. The OH will be modelled at three levels: node, optical stage and architecture. Different designs will be proposed and a particular architecture, Optimised Cut-Through Ring (OCTR), will be experimentally implemented. Finally, based on this architecture, a new set of properties will be defined in order to optimise the efficiency of the optical channels

Topical Workshop on Electronics for Particle Physics

The purpose of the workshop was to present results and original concepts for electronics research and development relevant to particle physics experiments as well as accelerator and beam instrumentation at future facilities; to review the status of electronics for the LHC experiments; to identify and encourage common efforts for the development of electronics; and to promote information exchange and collaboration in the relevant engineering and physics communities

Proceedings of the Sixth General Meeting of the International VLBI Service for Geodesy and Astrometry

This volume is the proceedings of the sixth General Meeting of the International VLBI Service for Geodesy and Astrometry (IVS), held in Hobart, Tasmania, Australia, February 7-13, 2010. The contents of this volume also appear on the IVS Web site at http://ivscc.gsfc.nasa.gov/publications/gm2010. The keynote of the sixth GM was the new perspectives of the next generation VLBI system under the theme "VLBI2010: From Vision to Reality". The goal of the meeting was to provide an interesting and informative program for a wide cross-section of IVS members, including station operators, program managers, and analysts. This volume contains 88 papers. All papers were edited by the editors for usage of the English language, form, and minor content-related issues