Architecture for grid-enabled instrumentation in extreme environments

Technological progress in recent decades has led to sensor networks and robotic explorers becoming principal tools for investigation of remote or "hostile" environments where it is difficult, if not impossible for humans to intervene. These situations include deep ocean and space environments where the devices can be subject to extreme pressures, temperatures and radiation levels. It is a costly enterprise to deploy an instrument in such settings and therefore reliable operation and ease of use are requisite features to build into the basic fabric of the machine. This thesis describes the design and implementation of a modular machine system based on a peer-to-peer, decentralised network topology where the power supply and electronic hardware resources are distributed homogeneously throughout a network of nodes. Embedded within each node is a minimal, low-power single board computer on which a real-time operating system and MicroCANopen protocol stack are operating to realise a standard interface to the network. The network is based on a grid paradigm where nodes act as resource producers and consumers, sharing information so that the machine system as a whole can perform tasks. The resulting architecture supports "plug-and-play" flexibility, to allow users or system developers to reconfigure or expand its capabilities by adding/removing nodes at a later time. An immediate application of this instrument is in-situ sampling of microbes in extreme aqueous habitats. The microbial sampler is targeted at providing improved sampling capabilities when performing physical, chemical and biological investigations in deep- ocean hydrothermal vent environments. At these depths the instrument is subject to immense pressures of many thousand pounds per square inch, where superheated, corrosive, mineral-loaded vent fluids mix with near-freezing seawater. In the longer term, it is anticipated that this flexible, open interface architecture on which the microbial sampler instrument is based will be applicable more generally to other sectors, including commercial and scientific markets.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Architecture for grid-enabled instrumentation in extreme environments

Technological progress in recent decades has led to sensor networks and robotic explorers becoming principal tools for investigation of remote or "hostile" environments where it is difficult, if not impossible for humans to intervene. These situations include deep ocean and space environments where the devices can be subject to extreme pressures, temperatures and radiation levels. It is a costly enterprise to deploy an instrument in such settings and therefore reliable operation and ease of use are requisite features to build into the basic fabric of the machine. This thesis describes the design and implementation of a modular machine system based on a peer-to-peer, decentralised network topology where the power supply and electronic hardware resources are distributed homogeneously throughout a network of nodes. Embedded within each node is a minimal, low-power single board computer on which a real-time operating system and MicroCANopen protocol stack are operating to realise a standard interface to the network. The network is based on a grid paradigm where nodes act as resource producers and consumers, sharing information so that the machine system as a whole can perform tasks. The resulting architecture supports "plug-and-play" flexibility, to allow users or system developers to reconfigure or expand its capabilities by adding/removing nodes at a later time. An immediate application of this instrument is in-situ sampling of microbes in extreme aqueous habitats. The microbial sampler is targeted at providing improved sampling capabilities when performing physical, chemical and biological investigations in deep- ocean hydrothermal vent environments. At these depths the instrument is subject to immense pressures of many thousand pounds per square inch, where superheated, corrosive, mineral-loaded vent fluids mix with near-freezing seawater. In the longer term, it is anticipated that this flexible, open interface architecture on which the microbial sampler instrument is based will be applicable more generally to other sectors, including commercial and scientific markets

Modeling EMI Resulting from a Signal Via Transition Through Power/Ground Layers

Signal transitioning through layers on vias are very common in multi-layer printed circuit board (PCB) design. For a signal via transitioning through the internal power and ground planes, the return current must switch from one reference plane to another reference plane. The discontinuity of the return current at the via excites the power and ground planes, and results in noise on the power bus that can lead to signal integrity, as well as EMI problems. Numerical methods, such as the finite-difference time-domain (FDTD), Moment of Methods (MoM), and partial element equivalent circuit (PEEC) method, were employed herein to study this problem. The modeled results are supported by measurements. In addition, a common EMI mitigation approach of adding a decoupling capacitor was investigated with the FDTD method

NASA Tech Briefs, May 2002

Topics include: a technology focus on engineering materials, electronic components and circuits, software, mechanics, machinery/automation, manufacturing, physical sciences, information sciences, book and reports, and a special section of Photonics Tech Briefs

Telecommunications system of a CubeSat satellite

This Final degree's thesis is done under the UPC-Canadà program in which the author realizes his last degree year in Montréal, Canada, to the Polytechnique de Montréal university under the supervision of Dr. Giovanni Beltrame being part of his laboratory Mistlab and also on the Polyorbite group of students. Polyorbite is an organization that participates in the biannual contest CSDC (Canadian Satellite Design Challenge) that consists on the realization from 0 of a 3U CubeSat by undergraduate and master students. By the start of this thesis on September 2016, the contest was in the middle of the 2014-2016 iteration without having almost nothing on the telecommunication part, having just 2 semesters for design, build and test an entirely telecommunications system, suitable for the satellite purpose, until June 2016 in which the final presentations of the contest took place on Ottawa. The purpose of this thesis is then an early design of a telecommunications system for a CubeSat satellite

Television broadcast from space systems: Technology, costs

Broadcast satellite systems are described. The technologies which are unique to both high power broadcast satellites and small TV receive-only earth terminals are also described. A cost assessment of both space and earth segments is included and appendices present both a computer model for satellite cost and the pertinent reported experience with the Japanese BSE