Entire domain basis function expansion of the differential surface admittance for efficient broadband characterization of lossy interconnects

This article presents a full-wave method to characterize lossy conductors in an interconnect setting. To this end, a novel and accurate differential surface admittance operator for cuboids based on entire domain basis functions is formulated. By combining this new operator with the augmented electric field integral equation, a comprehensive broadband characterization is obtained. Compared with the state of the art in differential surface admittance operator modeling, we prove the accuracy and improved speed of the novel formulation. Additional examples support these conclusions by comparing the results with commerical software tools and with measurements

Constraint-Aware, Scalable, and Efficient Algorithms for Multi-Chip Power Module Layout Optimization

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM layouts is surpassing the capability of a manual, iterative design process to produce an optimum design with agile development requirements. An electronic design automation tool called PowerSynth has been introduced with ongoing research toward enhanced capabilities to speed up the optimized MCPM layout design process. This dissertation presents the PowerSynth progression timeline with the methodology updates and corresponding critical results compared to v1.1. The first released version (v1.1) of PowerSynth demonstrated the benefits of layout abstraction, and reduced-order modeling techniques to perform rapid optimization of the MCPM module compared to the traditional, manual, and iterative design approach. However, that version is limited by several key factors: layout representation technique, layout generation algorithms, iterative design-rule-checking (DRC), optimization algorithm candidates, etc. To address these limitations, and enhance PowerSynth’s capabilities, constraint-aware, scalable, and efficient algorithms have been developed and implemented. PowerSynth layout engine has evolved from v1.3 to v2.0 throughout the last five years to incorporate the algorithm updates and generate all 2D/2.5D/3D Manhattan layout solutions. These fundamental changes in the layout generation methodology have also called for updates in the performance modeling techniques and enabled exploring different optimization algorithms. The latest PowerSynth 2 architecture has been implemented to enable electro-thermo-mechanical and reliability optimization on 2D/2.5D/3D MCPM layouts, and set up a path toward cabinet-level optimization. PowerSynth v2.0 computer-aided design (CAD) flow has been hardware-validated through manufacturing and testing of an optimized novel 3D MCPM layout. The flow has shown significant speedup compared to the manual design flow with a comparable optimization result

Geometry-Aware Methodology for Coupling Mechanism Analysis and Radiation Mechanism Analysis

Due to the wide-band spectrum of digital signals, a variety of noise generators, including microprocessors, liquid crystal displays, digital microphones, high-speed traces, and double-data-rate memory modules, are found in consumer electronics products. Noise generated by digital circuits can couple to the antennas and degrade their sensitivity. Additionally, it also couples to metallic housings or heatsinks and produces a significant amount of emission. In this research, methodologies are presented to analyze the coupling and radiation mechanism in electronic devices. To investigate the coupling between the distributive geometries in the radio frequency interference (RFI) problem, a mesh-dependent partition-based coupling mechanism analysis method is provided based on the retarded partial element equivalent circuit (rPEEC) model. The proposed method can quantify the capacitive and inductive coupling between the layout partitions and offers a clear physical understanding of the coupling study. The dipole moment is a popular equivalent noise source for digital circuits. The characteristic mode theory (CMT) is used as a systematic method to study the interaction between the equivalent noise source and the metallic housings. An analytic modal-based equation is used to predict the emissions. Mitigation methodologies, such as component placement and grounding post design, are also discussed based on the modal analysis results. The transfer function method is commonly used for RFI problem analysis and mitigation. In this work, using the CMT, a modal-based analysis is provided to calculate the transfer function between the aggressor and the antenna port. The interference can be mitigated by component placement and changes in the antenna designs without compromising the antenna performance --Abstract, p. i

An automated design methodology of RF circuits by using Pareto-optimal fronts of EMsimulated inductors

A new design methodology for radiofrequency circuits is presented that includes electromagnetic (EM) simulation of the inductors into the optimization flow. This is achieved by previously generating the Pareto-optimal front (POF) of the inductors using EM simulation. Inductors are selected from the Pareto front and their S-parameter matrix is included in the circuit netlist that is simulated using an RF simulator. Generating the EM-simulated POF of inductors is computationally expensive, but once generated, it can be used for any circuit design. The methodology is illustrated both for a singleobjective and a multiobjective optimization of a low noise amplifierMinisterio de Economía y Competitividad TEC2013-45638-C3-3-R, TEC2013-40430-RJunta de Andalucía PIC12-TIC-1481Consejo Superior de Investigaciones Científicas 201350E05

Fast, non-monte-carlo estimation of transient performance variation due to device mismatch

This paper describes an efficient way of simulating the effects of device random mismatch on circuit transient characteristics, such as variations in delay or in frequency. The proposed method models DC random offsets as equivalent AC pseudo-noises and leverages the fast, linear periodically time-varying (LPTV) noise analysis available from RF circuit simulators. Therefore, the method can be considered as an extension to DC match analysis and offers a large speed-up compared to the traditional Monte-Carlo analysis. Although the assumed linear perturbation model is valid only for small variations, it enables easy ways to estimate correlations among variations and identify the most sensitive design parameters to mismatch, all at no additional simulation cost. Three benchmarks measuring the variations in the input offset voltage of a clocked comparator, the delay of a logic path, and the frequency of an oscillator demonstrate the speed improvement of about 100-1000x compared to a 1000-point Monte-Carlo method

HIGH PERFORMANCE CLOCK DISTRIBUTION FOR HIGH-SPEED VLSI SYSTEMS

Tohoku University堀口 進課