Frequency-modulated continuous-wave synthetic-aperture radar: improvements in signal processing

With the advance of solid state devices, frequency-modulated continuous-wave (FMCW) designs have recently been used in synthetic-aperture radar (SAR) to decrease cost, size, weight and power consumption, making it deployable on smaller mobile plat-forms, including small (< 25 kg) unmanned aerial vehicle(s) (UAV). To foster its mobile uses, several SAR capabilities were studied: moving target indication (MTI) for increased situational awareness, bistatic operation, e.g. in UAV formation flights, for increased range, and signal processing algorithms for faster real-time performance. Most off-the-shelf SAR systems for small mobile platforms are commercial proprie-tary and/or military (ITAR, International Trades in Arms Regulations) restricted. As such, it necessitated the design and build of a prototype FMCW SAR system at the early stage to serve as a research tool. This enabled unrestricted hardware and software modifica-tions and experimentation. A model to analyze the triangularly modulated (TM) linear frequency modulated (LFM) waveform as one signal was established and used to develop a MTI algorithm which is effective for slow moving targets detection. Experimental field data collected by the prototyped FMCW SAR was then used to validate and demonstrate the effectiveness of the proposed MTI method. A bistatic FMCW SAR model was next introduced: Bistatic configuration is a poten-tial technique to overcome the power leakage problem in monostatic FMCW SAR. By mounting the transmitter and receiver on spatially separate mobile (UAV) platforms in formation deployment, the operation range of a bistatic FMCW SAR can be significantly improved. The proposed approximation algorithm established a signal model for bistatic FMCW SAR by using the Fresnel approximation. This model allows the existing signal processing algorithms to be used in bistatic FMCW SAR image generation without sig-nificant modification simplifying bistatic FMCW SAR signal processing. The proposed range migration algorithm is a versatile and efficient FMCW SAR sig-nal processing algorithm which requires less memory and computational load than the traditional RMA. This imaging algorithm can be employed for real-time image genera-tion by the FMCW SAR system on mobile platforms. Simulation results verified the pro-posed spectral model and experimental data demonstrated the effectiveness of the modi-fied RMA

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine

Signal Processing for Synthetic Aperture Sonar Image Enhancement

This thesis contains a description of SAS processing algorithms, offering improvements in Fourier-based reconstruction, motion-compensation, and autofocus. Fourier-based image reconstruction is reviewed and improvements shown as the result of improved system modelling. A number of new algorithms based on the wavenumber algorithm for correcting second order effects are proposed. In addition, a new framework for describing multiple-receiver reconstruction in terms of the bistatic geometry is presented and is a useful aid to understanding. Motion-compensation techniques for allowing Fourier-based reconstruction in widebeam geometries suffering large-motion errors are discussed. A motion-compensation algorithm exploiting multiple receiver geometries is suggested and shown to provide substantial improvement in image quality. New motion compensation techniques for yaw correction using the wavenumber algorithm are discussed. A common framework for describing phase estimation is presented and techniques from a number of fields are reviewed within this framework. In addition a new proof is provided outlining the relationship between eigenvector-based autofocus phase estimation kernels and the phase-closure techniques used astronomical imaging. Micronavigation techniques are reviewed and extensions to the shear average single-receiver micronavigation technique result in a 3 - 4 fold performance improvement when operating on high-contrast images. The stripmap phase gradient autofocus (SPGA) algorithm is developed and extends spotlight SAR PGA to the wide-beam, wide-band stripmap geometries common in SAS imaging. SPGA supersedes traditional PGA-based stripmap autofocus algorithms such as mPGA and PCA - the relationships between SPGA and these algorithms is discussed. SPGA's operation is verified on simulated and field-collected data where it provides significant image improvement. SPGA with phase-curvature based estimation is shown and found to perform poorly compared with phase-gradient techniques. The operation of SPGA on data collected from Sydney Harbour is shown with SPGA able to improve resolution to near the diffraction-limit. Additional analysis of practical stripmap autofocus operation in presence of undersampling and space-invariant blurring is presented with significant comment regarding the difficulties inherent in autofocusing field-collected data. Field-collected data from trials in Sydney Harbour is presented along with associated autofocus results from a number of algorithms

Motion Compensation for Near-Range Synthetic Aperture Radar Applications

The work focuses on the analysis of influences of motion errors on near-range SAR applications and design of specific motion measuring and compensation algorithms. First, a novel metric to determine the optimum antenna beamwidth is proposed. Then, a comprehensive investigation of influences of motion errors on the SAR image is provided. On this ground, new algorithms for motion measuring and compensation using low cost inertial measurement units (IMU) are developed and successfully demonstrated

Highly Resolved Synthetic Aperture Radar with Beam Steering

The present work deals with a highly resolved radar with a synthetic aperture (synthetic aperture radar - SAR), which uses a beam steering to improve performance. The first part of this work deals with the influence of various effects occurring in the hardware of the High-Resolution Wide-Swath SAR (HRWS SAR) system. A special focus was set to single bit quantization in multi-channel receiver. The second part of this work describes SAR processors for Sliding Spotlight mode

Highly Resolved Synthetic Aperture Radar with Beam Steering

Diese Arbeit beschäftigt sich mit einem hochauflösenden Radar mit synthetischer Apertur. Der erste Teil dieser Arbeit beschreibt mögliche Auswirkungen verschiedener Effekte in dem Empfänger des High-Resolution Wide-Swath SAR (HRWS SAR) Systems. Darüber hinaus wird ein Konzept zu Reduktion von Quantisierungsbits in Systemen mit mehreren Empfangskanälen untersucht. Der zweite Teil der Arbeit betrifft die Datenverarbeitung eines hochauflösenden SAR-Systems in Sliding Spotlight Mode

FMCW Radar signal processing for Antarctic Ice Shelf profiling and imaging

This thesis contains details of all the signal processing work being done on FMCW Radar (operating at VHF-UHF band) for the Antarctic Ice Shelf monitoring project that has been carried out at UCL. The system developed at UCL was based on a novel concept of phase-sensitive FMCW radar with low power consumption, thus allowing data collection for long period of time with millimetre range precision. Development of new signal processing method was required in order to process the large amount of data, along with the signal processing technique for obtaining the high precision range values. This was achieved during the first stage of the thesis, providing accurate ice shelf basal layer melt rate values. Properties of the FMCW radar system and experimental scenarios posed further signal processing challenges. Those challenges were met by developing number of novel algorithms. A novel shape matching algorithm was developed to detect internal layers underneath the ice shelf. Range migration correction method was developed to compensate for the defocusing of the image in large angles due to high fractional bandwidth of the radar system. Vertical error correction method was developed to compensate for any vertical displacement of the radar antenna during field experiment. Finally, a novel 3-D MIMO imaging algorithm for the Antarctic ice shelf base study was developed. This was done to process the 8x8 MIMO radar (developed at UCL) data. The radars have been deployed in the Antarctica during the Austral summer of each year from 2011-2014. The field experiments were done in the Ronne, Larsen-C, Larsen North, George VI and Ross ice shelves. The novel signal processing techniques have been successfully applied on the real data, allowing better understanding of the Antarctic ice shelf features

Wide-Angle Multistatic Synthetic Aperture Radar: Focused Image Formation and Aliasing Artifact Mitigation

Traditional monostatic Synthetic Aperture Radar (SAR) platforms force the user to choose between two image types: larger, low resolution images or smaller, high resolution images. Switching to a Wide-Angle Multistatic Synthetic Aperture Radar (WAM-SAR) approach allows formation of large high-resolution images. Unfortunately, WAM-SAR suffers from two significant implementation problems. First, wavefront curvature effects, non-linear flight paths, and warped ground planes lead to image defocusing with traditional SAR processing methods. A new 3-D monostatic/bistatic image formation routine solves the defocusing problem, correcting for all relevant wide-angle effects. Inverse SAR (ISAR) imagery from a Radar Cross Section (RCS) chamber validates this approach. The second implementation problem stems from the large Doppler spread in the wide-angle scene, leading to severe aliasing problems. This research effort develops a new anti-aliasing technique using randomized Stepped-Frequency (SF) waveforms to form Doppler filter nulls coinciding with aliasing artifact locations. Both simulation and laboratory results demonstrate effective performance, eliminating more than 99% of the aliased energy