MAC/Routing design for under water sensor networks

The huge advances in communication technologies and Micro Electrical and Mechanical Systems (MEMS) have triggered a revolution in sensor networks. One major application of sensor networks is in the investigation of complex and uninhabited under water surfaces; such sensor networks are called the Underwater Wireless Sensor Networks (UWSN). UWSN comprises of a number of sensors which are submerged in water and one or several surface stations or a sinks at which the sensed data is collected. In some underwater sensor applications, autonomous underwater vehicles (AUVs) could be used. The underwater sensor nodes communicate with each other using acoustic signals. Applications for this type of networks include oceanographic data collection, pollution monitoring, offshore exploration and tactical surveillance applications. The novel networking paradigm of UWSN is facing a totally different operating environment than the ground based wireless sensor networks. This introduces new challenges such as huge propagation delays, and limited acoustic link capacity with high attenuation factors. These new challenges have their own impact on the design of most of the networking layers preventing researchers from using the same layers used for other networks. The most affected layers are the Physical, Medium Access Control (MAC), Routing and Transport layers. This work will introduce novel routing and MAC layers’ protocols for UWSNs. The routing protocol will adopt the minimum spanning tree algorithm and focus on maximizing the connectivity of the network, which means maximizing the total number of nodes connected to the root or the sink in this case. The protocol will try also to provide a minimum hop connection for all the nodes in the network taking into account the residual energy, location information and number of children at the next hop node. The other contribution of this work is a MAC Protocol which will incorporate the topology information provided by the routing protocol to minimize the collisions and energy wastage in data transmission. The MAC Protocol will also try to shorten the queuing delays at the intermediate nodes for a message traveling from source to the sink. A comparison will be conducted with other existing routing and MAC protocols. The routing protocol will be tested and compared with the E-Span spanning tree algorithm for data aggregation. The MAC protocol will be compared with Park\u27s protocol proposed in [2] in terms of performance metrics like end-to-end delay and the number of collisions. We will also explore the ability of the proposed protocols to enhance the life span of the network

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

Towards Real-time Wireless Sensor Networks

Wireless sensor networks are poised to change the way computer systems interact with the physical world. We plan on entrusting sensor systems to collect medical data from patients, monitor the safety of our infrastructure, and control manufacturing processes in our factories. To date, the focus of the sensor network community has been on developing best-effort services. This approach is insufficient for many applications since it does not enable developers to determine if a system\u27s requirements in terms of communication latency, bandwidth utilization, reliability, or energy consumption are met. The focus of this thesis is to develop real-time network support for such critical applications. The first part of the thesis focuses on developing a power management solution for the radio subsystem which addresses both the problem of idle-listening and power control. In contrast to traditional power management solutions which focus solely on reducing energy consumption, the distinguishing feature of our approach is that it achieves both energy efficiency and real-time communication. A solution to the idle-listening problem is proposed in Energy Efficient Sleep Scheduling based on Application Semantics: ESSAT). The novelty of ESSAT lies in that it takes advantage of the common features of data collection applications to determine when to turn on and off a node\u27s radio without affecting real-time performance. A solution to the power control problem is proposed in Real-time Power Aware-Routing: RPAR). RPAR tunes the transmission power for each packet based on its deadline such that energy is saved without missing packet deadlines. The main theoretical contribution of this thesis is the development of novel transmission scheduling techniques optimized for data collection applications. This work bridges the gap between wireless sensor networks and real-time scheduling theory, which have traditionally been applied to processor scheduling. The proposed approach has significant advantages over existing design methodologies:: 1) it provides predictable performance allowing for the performance of a system to be estimated upon its deployment,: 2) it is possible to detect and handle overload conditions through simple rate control mechanisms, and: 3) it easily accommodates workload changes. I developed this framework under a realistic interference model by coordinating the activities at the MAC, link, and routing layers. The last component of this thesis focuses on the development of a real-time patient monitoring system for general hospital units. The system is designed to facilitate the detection of clinical deterioration, which is a key factor in saving lives and reducing healthcare costs. Since patients in general hospital wards are often ambulatory, a key challenge is to achieve high reliability even in the presence of mobility. To support patient mobility, I developed the Dynamic Relay Association Protocol -- a simple and effective mechanism for dynamically discovering the right relays for forwarding patient data -- and a Radio Mapping Tool -- a practical tool for ensuring network coverage in 802.15.4 networks. We show that it is feasible to use low-power and low-cost wireless sensor networks for clinical monitoring through an in-depth clinical study. The study was performed in a step-down cardiac care unit at Barnes-Jewish Hospital. This is the first long-term study of such a patient monitoring system

Communication protocols for energy constrained networks

Ph.DDOCTOR OF PHILOSOPH

Real-time Power Aware Routing in Wireless Sensor Networks

Many mission-critical wireless sensor network applications must resolve the inherent conflict between the tight resource constraints on each sensor node, particularly in terms of energy, with the need to achieve desired quality of service such as end-to-end real-time performance. To address this challenge we propose the Real-time Power-Aware Routing (RPAR) protocol. RPAR achieves required communication delays at minimum energy cost by dynamically adapting the transmission power and routing decisions based on packet deadlines. RPAR integrates a geographic forwarding policy cognizant of deadlines, power, and link quality with new algorithms for on-demand power adaptation and efficient neighborhood discovery. Simulations based on a realistic radio model of MICA2 motes show that RPAR significantly reduces the number of deadline misses and energy consumption when compared to existing real-time and energy-efficient routing protocols and beacon based neighborhood management schemes

Unified Power Management in Wireless Sensor Networks, Doctoral Dissertation, August 2006

Radio power management is of paramount concern in wireless sensor networks (WSNs) that must achieve long lifetimes on scarce amount of energy. Previous work has treated communication and sensing separately, which is insufficient for a common class of sensor networks that must satisfy both sensing and communication requirements. Furthermore, previous approaches focused on reducing energy consumption in individual radio states resulting in suboptimal solutions. Finally, existing power management protocols often assume simplistic models that cannot accurately reflect the sensing and communication properties of real-world WSNs. We develop a unified power management approach to address these issues. We first analyze the relationship between sensing and communication performance of WSNs. We show that sensing coverage often leads to good network connectivity and geographic routing performance, which provides insights into unified power management under both sensing and communication performance requirements. We then develop a novel approach called Minimum Power Configuration that ingegrates the power consumption in different radio states into a unified optimization framework. Finally, we develop two power management protocols that account for realistic communication and sensing properties of WSNs. Configurable Topology Control can configure a network topology to achieve desired path quality in presence of asymmetric and lossy links. Co-Grid is a coverage maintenance protocol that adopts a probabilistic sensing model. Co-Grid can satisfy desirable sensing QoS requirements (i.e., detection probability and false alarm rate) based on a distributed data fusion model

Cross-layer energy optimisation of routing protocols in wireless sensor networks

Recent technological developments in embedded systems have led to the emergence of a new class of networks, known asWireless Sensor Networks (WSNs), where individual nodes cooperate wirelessly with each other with the goal of sensing and interacting with the environment.Many routing protocols have been developed tomeet the unique and challenging characteristics of WSNs (notably very limited power resources to sustain an expected lifetime of perhaps years, and the restricted computation, storage and communication capabilities of nodes that are nonetheless required to support large networks and diverse applications). No standards for routing have been developed yet for WSNs, nor has any protocol gained a dominant position among the research community. Routing has a significant influence on the overall WSN lifetime, and providing an energy efficient routing protocol remains an open problem. This thesis addresses the issue of designing WSN routing methods that feature energy efficiency. A common time reference across nodes is required in mostWSN applications. It is needed, for example, to time-stamp sensor samples and for duty cycling of nodes. Alsomany routing protocols require that nodes communicate according to some predefined schedule. However, independent distribution of the time information, without considering the routing algorithm schedule or network topology may lead to a failure of the synchronisation protocol. This was confirmed empirically, and was shown to result in loss of connectivity. This can be avoided by integrating the synchronisation service into the network layer with a so-called cross-layer approach. This approach introduces interactions between the layers of a conventional layered network stack, so that the routing layer may share information with other layers. I explore whether energy efficiency can be enhanced through the use of cross-layer optimisations and present three novel cross-layer routing algorithms. The first protocol, designed for hierarchical, cluster based networks and called CLEAR (Cross Layer Efficient Architecture for Routing), uses the routing algorithm to distribute time information which can be used for efficient duty cycling of nodes. The second method - called RISS (Routing Integrated Synchronization Service) - integrates time synchronization into the network layer and is designed to work well in flat, non-hierarchical network topologies. The third method - called SCALE (Smart Clustering Adapted LEACH) - addresses the influence of the intra-cluster topology on the energy dissipation of nodes. I also investigate the impact of the hop distance on network lifetime and propose a method of determining the optimal location of the relay node (the node through which data is routed in a two-hop network). I also address the problem of predicting the transition region (the zone separating the region where all packets can be received and that where no data can be received) and I describe a way of preventing the forwarding of packets through relays belonging in this transition region. I implemented and tested the performance of these solutions in simulations and also deployed these routing techniques on sensor nodes using TinyOS. I compared the average power consumption of the nodes and the precision of time synchronization with the corresponding parameters of a number of existing algorithms. All proposed schemes extend the network lifetime and due to their lightweight architecture they are very efficient on WSN nodes with constrained resources. Hence it is recommended that a cross-layer approach should be a feature of any routing algorithm for WSNs