Correlator implementation for orthogonal CSS used in an ultrasonic LPS

This paper presents a new architecture for the correlation of orthogonal complementary sets of sequences (OCSS) and their performance in an ultrasonic local positioning system (U-LPS). OCSS are sets of sequences whose addition of correlation functions has ideal properties, that makes interference-free code-division multiple access (CDMA) possible. They can be used to encode the signals emitted by a CDMA based U-LPS, enhancing the performance of such systems in terms of immunity against noise, multipath propagation, and near-far effect. Also, the orthogonality of the codes offers an operation resistance to multiaccess interference, which endows the U-LPS with the capability of simultaneous emission from different beacons. On the other hand, the detection of OCSS codes can be performed by means of efficient algorithms. This paper presents an optimization of previous proposals allowing the simultaneous correlation of OCSS by using fewer operations and memory elements. Furthermore, the hardware implementation of the proposed optimization is also addressed, and an U-LPS based on this proposal is presented.Fil: Peréz Rubio, M. Carmen. Universidad de Alcalá; EspañaFil: Sanz Serrano, Rebeca. Universidad de Alcalá; EspañaFil: Ureña Ureña, Jesús. Universidad de Alcalá; EspañaFil: Hernández Alonso, Álvaro. Universidad de Alcalá; EspañaFil: de Marziani, Carlos Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Álvarez Franco, Fernando J.. Universidad Nacional de la Patagonia "San Juan Bosco". Facultad de Ingeniería - Sede Comodoro; Argentin

Efficient complementary sequences-based architectures and their application to ranging measurements

Premio Extraordinario de Doctorado de la UAH en 2015En las últimas décadas, los sistemas de medición de distancias se han beneficiado de los avances en el área de las comunicaciones inalámbricas. En los sistemas basados en CDMA (Code-Division Multiple-Access), las propiedades de correlación de las secuencias empleadas juegan un papel fundamental en el desarrollo de dispositivos de medición de altas prestaciones. Debido a las sumas ideales de correlaciones aperiódicas, los conjuntos de secuencias complementarias, CSS (Complementary Sets of Sequences), son ampliamente utilizados en sistemas CDMA. En ellos, es deseable el uso de arquitecturas eficientes que permitan generar y correlar CSS del mayor número de secuencias y longitudes posibles. Por el término eficiente se hace referencia a aquellas arquitecturas que requieren menos operaciones por muestra de entrada que con una arquitectura directa. Esta tesis contribuye al desarrollo de arquitecturas eficientes de generación/correlación de CSS y derivadas, como son las secuencias LS (Loosely Synchronized) y GPC (Generalized Pairwise Complementary), que permitan aumentar el número de longitudes y/o de secuencias disponibles. Las contribuciones de la tesis pueden dividirse en dos bloques: En primer lugar, las arquitecturas eficientes de generación/correlación para CSS binarios, derivadas en trabajos previos, son generalizadas al alfabeto multinivel (secuencias con valores reales) mediante el uso de matrices de Hadamard multinivel. Este planteamiento tiene dos ventajas: por un lado el aumento del número de longitudes que pueden generarse/correlarse y la eliminación de las limitaciones de las arquitecturas previas en el número de secuencias en el conjunto. Por otro lado, bajo ciertas condiciones, los parámetros de las arquitecturas generalizadas pueden ajustarse para generar/correlar eficientemente CSS binarios de mayor número de longitudes que con las arquitecturas eficientes previas. En segundo lugar, las arquitecturas propuestas son usadas para el desarrollo de nuevos algoritmos de generación/correlación de secuencias derivadas de CSS que reducen el número de operaciones por muestra de entrada. Finalmente, se presenta la aplicación de las secuencias estudiadas en un nuevo sistema de posicionamiento local basado en Ultra-Wideband y en un sistema de posicionamiento local basado en ultrasonidos

Motion-compensation for complementary-coded medical ultrasonic imaging

Ultrasound is a well-established tool for medical imaging. It is non-invasive and relatively inexpensive, but the severe attenuation caused by propagation through tissue limits its effectiveness for deep imaging. In recent years, the ready availability of fast, inexpensive computer hardware has facilitated the adoption of signal coding and compression techniques to counteract the effects of attenuation. Despite widespread investigation of the topic, published opinions vary as to the relative suitability of discrete-phase-modulated and frequency-modulated (or continuous-phase-modulated) signals for ultrasonic imaging applications. This thesis compares the performance of discrete binary-phase coded pulses to that of frequency-modulated pulses at the higher imaging frequencies at which the effects of attenuation are most severe. The performance of linear and non-linear frequency modulated pulses with optimal side-lobe characteristics is compared to that of complementary binary-phase coded pulses by simulation and experiment. Binary-phase coded pulses are shown to be more robust to the affects of attenuation and non-ideal transducers. The comparatively poor performance of frequency-modulated pulses is explained in terms of the spectral characteristics of the signals and filters required to reduce side-lobes to levels acceptable for imaging purposes. In theory, complementary code sets like bi-phase Golay pairs offer optimum side-lobe performance at the expense of a reduction in frame rate. In practice, misalignment caused by motion in the medium can have a severe impact on imaging performance. A novel motioncompensated imaging algorithm designed to reduce the occurrence of motion artefacts and eliminate the reduction in frame-rate associated with complementary-coding is presented. This is initially applied to conventional sequential-scan B-mode imaging then adapted for use in synthetic aperture B-mode imaging. Simulation results are presented comparing the performance of the motion-compensated sequential-scan and synthetic aperture systems with that of simulated systems using uncoded and frequency-modulated excitation pulses

Design and performance of CDMA codes for multiuser communications

Walsh and Gold sequences are fixed power codes and are widely used in multiuser CDMA communications. Their popularity is due to the ease of implementation. Availability of these code sets is limited because of their generating kernels. Emerging radio applications like sensor networks or multiple service types in mobile and peer-to-peer communications networks might benefit from flexibilities in code lengths and possible allocation methodologies provided by large set of code libraries. Walsh codes are linear phase and zero mean with unique number of zero crossings for each sequence within the set. DC sequence is part of the Walsh code set. Although these features are quite beneficial for source coding applications, they are not essential for spread spectrum communications. By relaxing these unnecessary constraints, new sets of orthogonal binary user codes (Walsh-like) for different lengths are obtained with comparable BER performance to standard code sets in all channel conditions. Although fixed power codes are easier to implement, mathematically speaking, varying power codes offer lower inter- and intra-code correlations. With recent advances in RF power amplifier design, it might be possible to implement multiple level orthogonal spread spectrum codes for an efficient direct sequence CDMA system. A number of multiple level integer codes have been generated by brute force search method for different lengths to highlight possible BER performance improvement over binary codes. An analytical design method has been developed for multiple level (variable power) spread spectrum codes using Karhunen-Loeve Transform (KLT) technique. Eigen decomposition technique is used to generate spread spectrum basis functions that are jointly spread in time and frequency domains for a given covariance matrix or power spectral density function. Since this is a closed form solution for orthogonal code set design, many options are possible for different code lengths. Design examples and performance simulations showed that spread spectrum KLT codes outperform or closely match with the standard codes employed in present CDMA systems. Hybrid (Kronecker) codes are generated by taking Kronecker product of two spreading code families in a two-stage orthogonal transmultiplexer structure and are judiciously allocated to users such that their inter-code correlations are minimized. It is shown that, BER performance of hybrid codes with a code selection and allocation algorithm is better than the performance of standard Walsh or Gold code sets for asynchronous CDMA communications. A redundant spreading code technique is proposed utilizing multiple stage orthogonal transmultiplexer structure where each user has its own pre-multiplexer. Each data bit is redundantly spread in the pre-multiplexer stage of a user with odd number of redundancy, and at the receiver, majority logic decision is employed on the detected redundant bits to obtain overall performance improvement. Simulation results showed that redundant spreading method improves BER performance significantly at low SNR channel conditions

Radar Technology

In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design

Monitoring system for long-distance pipelines subject to destructive attack

In an era of terrorism, it is important to protect critical pipeline infrastructure, especially in countries where life is strongly dependent on water and the economy on oil and gas. Structural health monitoring (SHM) using acoustic waves is one of the common solutions. However, considerable prior work has shown that pipes are cylindrical acoustic waveguides that support many dispersive, lossy modes; only the torsional T(0, 1) mode has zero dispersion. Although suitable transducers have been developed, these typically excite several modes, and even if they do not, bends and supports induce mode conversion. Moreover, the high-power transducers that could in principle be used to overcome noise and attenuation in long distance pipes present an obvious safety hazard with volatile products, making it difficult to distinguish signals and extract pipeline status information. The problem worsens as the pipe diameter increases or as the frequency rises (due to the increasing number of modes), if the pipe is buried (due to rising attenuation), or if the pipe carries a flowing product (because of additional acoustic noise). Any system is therefore likely to be short-range. This research proposes the use of distributed active sensor network to monitor long-range pipelines, by verifying continuity and sensing small disturbances. A 4-element cuboid Electromagnetic Acoustic Transducer (EMAT) is used to excite the longitudinal L(0,1) mode. Although the EMAT also excites other slower modes, long distance propagation allows their effects to be separated. Correlation detection is exploited to enhance signal-to-noise ratio (SNR), and code division multiplexing access (CDMA) is used to distinguish between nodes in a multi-node system. An extensive numerical search for multiphase quasi-orthogonal codes for different user numbers is conducted. The results suggest that side lobes degrade performance even with the highest possible discrimination factor. Golay complementary pairs (which can eliminate the side lobes completely, albeit at the price of a considerable reduction in speed) are therefore investigated as an alternative. Pipeline systems are first reviewed. Acoustic wave propagation is described using standard theory and a freeware modeling package. EMAT modeling is carried out by numerical calculation of electromagnetic fields. Signal propagation is investigated theoretically using a full system simulator that allows frequency-domain description of transducers, dispersion, multi-mode propagation, mode conversion and multiple reflections. Known codes for multiplexing are constructed using standard algorithms, and novel codes are discovered by an efficient directed search. Propagation of these codes in a dispersive system is simulated. Experiments are carried out using small, unburied air-filled copper pipes in a frequency range where the number of modes is small, and the attenuation and noise are low. Excellent agreement is obtained between theory and experiment. The propagation of pulses and multiplexed codes over distances up to 200 m are successfully demonstrated, and status changes introduced by removable reflectors are detected.Open Acces

Towards Detection of Redshifted 21-cm Signal from Cosmic Dawn and Epoch of Reionisation

The redshifted 21-cm signal from neutral hydrogen has the potential to provide valuable information on the the periods of cosmic dawn and epoch of reionisation (CD/EoR). The sky-averaged or global component of the 21-cm signal is expected to be observable as a distortion to the low frequency radio spectrum. This thesis is on experimental techniques to detect the global 21-cm signal. Instrument descriptions, laboratory analysis, calibration and data analysis methods for two different instruments - SARAS-3 and SITARA - are provided. Advantages and challenges associated with each instrument are also discussed