Collaborative Communication And Storage In Energy-Synchronized Sensor Networks

In a battery-less sensor network, all the operation of sensor nodes are strictly constrained by and synchronized with the fluctuations of harvested energy, causing nodes to be disruptive from network and hence unstable network connectivity. Such wireless sensor network is named as energy-synchronized sensor networks. The unpredictable network disruptions and challenging communication environments make the traditional communication protocols inefficient and require a new paradigm-shift in design. In this thesis, I propose a set of algorithms on collaborative data communication and storage for energy-synchronized sensor networks. The solutions are based on erasure codes and probabilistic network codings. The proposed set of algorithms significantly improve the data communication throughput and persistency, and they are inherently amenable to probabilistic nature of transmission in wireless networks. The technical contributions explore collaborative communication with both no coding and network coding methods. First, I propose a collaborative data delivery protocol to exploit the optimal performance of multiple energy-synchronized paths without network coding, i.e. a new max-flow min-variance algorithm. In consort with this data delivery protocol, a localized TDMA MAC protocol is designed to synchronize nodes\u27 duty-cycles and mitigate media access contentions. However, the energy supply can change dynamically over time, making determined duty cycles synchronization difficult in practice. A probabilistic approach is investigated. Therefore, I present Opportunistic Network Erasure Coding protocol (ONEC), to collaboratively collect data. ONEC derives the probability distribution of coding degree in each node and enable opportunistic in-network recoding, and guarantee the recovery of original sensor data can be achieved with high probability upon receiving any sufficient amount of encoded packets. Next, OnCode, an opportunistic in-network data coding and delivery protocol is proposed to further improve data communication under the constraints of energy synchronization. It is resilient to packet loss and network disruptions, and does not require explicit end-to-end feedback message. Moreover, I present a network Erasure Coding with randomized Power Control (ECPC) mechanism for collaborative data storage in disruptive sensor networks. ECPC only requires each node to perform a single broadcast at each of its several randomly selected power levels. Thus it incurs very low communication overhead. Finally, I propose an integrated algorithm and middleware (Ravine Stream) to improve data delivery throughput as well as data persistency in energy-synchronized sensor network

Design and Reliability Performance Evaluation of Network Coding Schemes for Lossy Wireless Networks

This thesis investigates lossy wireless networks, which are wireless communication networks consisting of lossy wireless links, where the packet transmission via a lossy wireless link is successful with a certain value of probability. In particular, this thesis analyses all-to-all broadcast in lossy wireless networks, where every node has a native packet to transmit to all other nodes in the network. A challenge of all-to-all broadcast in lossy wireless networks is the reliability, which is defined as the probability that every node in the network successfully obtains a copy of the native packets of all other nodes. In this thesis, two novel network coding schemes are proposed, which are the neighbour network coding scheme and the random neighbour network coding scheme. In the two proposed network coding schemes, a node may perform a bit-wise exclusive or (XOR) operation to combine the native packet of itself and the native packet of its neighbour, called the coding neighbour, into an XOR coded packet. The reliability of all-to-all broadcast under both the proposed network coding schemes is investigated analytically using Markov chains. It is shown that the reliability of all-to-all broadcast can be improved considerably by employing the proposed network coding schemes, compared with non-coded networks with the same link conditions, i.e. same probabilities of successful packet transmission via wireless channels. Further, the proposed schemes take the link conditions of each node into account to maximise the reliability of a given network. To be more precise, the first scheme proposes the optimal coding neighbour selection method while the second scheme introduces a tuning parameter to control the probability that a node performs network coding at each transmission. The observation that channel condition can have a significant impact on the performance of network coding schemes is expected to be applicable to other network coding schemes for lossy wireless networks

Design and Reliability Performance Evaluation of Network Coding Schemes for Lossy Wireless Networks

This thesis investigates lossy wireless networks, which are wireless communication networks consisting of lossy wireless links, where the packet transmission via a lossy wireless link is successful with a certain value of probability. In particular, this thesis analyses all-to-all broadcast in lossy wireless networks, where every node has a native packet to transmit to all other nodes in the network. A challenge of all-to-all broadcast in lossy wireless networks is the reliability, which is defined as the probability that every node in the network successfully obtains a copy of the native packets of all other nodes. In this thesis, two novel network coding schemes are proposed, which are the neighbour network coding scheme and the random neighbour network coding scheme. In the two proposed network coding schemes, a node may perform a bit-wise exclusive or (XOR) operation to combine the native packet of itself and the native packet of its neighbour, called the coding neighbour, into an XOR coded packet. The reliability of all-to-all broadcast under both the proposed network coding schemes is investigated analytically using Markov chains. It is shown that the reliability of all-to-all broadcast can be improved considerably by employing the proposed network coding schemes, compared with non-coded networks with the same link conditions, i.e. same probabilities of successful packet transmission via wireless channels. Further, the proposed schemes take the link conditions of each node into account to maximise the reliability of a given network. To be more precise, the first scheme proposes the optimal coding neighbour selection method while the second scheme introduces a tuning parameter to control the probability that a node performs network coding at each transmission. The observation that channel condition can have a significant impact on the performance of network coding schemes is expected to be applicable to other network coding schemes for lossy wireless networks

Enhanced Rateless Coding and Compressive Sensing for Efficient Data/multimedia Transmission and Storage in Ad-hoc and Sensor Networks

In this dissertation, we investigate the theory and applications of the novel class of FEC codes called rateless or fountain codes in video transmission and wireless sensor networks (WSN). First, we investigate the rateless codes in intermediate region where the number of received encoded symbols is less that minimum required for full datablock decoding. We devise techniques to improve the input symbol recovery rate when the erasure rate is unknown, and also for the case where an estimate of the channel erasure rate is available. Further, we design unequal error protection (UEP) rateless codes for distributed data collection of data blocks of unequal lengths, where two encoders send their rateless coded output symbols to a destination through a common relay. We design such distributed rateless codes, and jointly optimize rateless coding parameters at each nodes and relaying parameters. Moreover, we investigate the performance of rateless codes with finite block length in the presence of feedback channel. We propose a smart feedback generation technique that greatly improves the performance of rateless codes when data block is finite. Moreover, we investigate the applications of UEP-rateless codes in video transmission systems. Next, we study the optimal cross-layer design of a video transmission system with rateless coding at application layer and fixed-rate coding (RCPC coding) at physical layer. Finally, we review the emerging compressive sensing (CS) techniques that have close connections to FEC coding theory, and designed an efficient data storage algorithm for WSNs employing CS referred to by CStorage. First, we propose to employ probabilistic broadcasting (PB) to form one CS measurement at each node and design CStorage- P. Later, we can query any arbitrary small subset of nodes and recover all sensors reading. Next, we design a novel parameterless and more efficient data dissemination algorithm that uses two-hop neighbor information referred to alternating branches (AB).We replace PB with AB and design CStorage-B, which results in a lower number of transmissions compared to CStorage-P.Electrical Engineerin

Scalable download protocols

Scalable on-demand content delivery systems, designed to effectively handle increasing request rates, typically use service aggregation or content replication techniques. Service aggregation relies on one-to-many communication techniques, such as multicast, to efficiently deliver content from a single sender to multiple receivers. With replication, multiple geographically distributed replicas of the service or content share the load of processing client requests and enable delivery from a nearby server.Previous scalable protocols for downloading large, popular files from a single server include batching and cyclic multicast. Analytic lower bounds developed in this thesis show that neither of these protocols consistently yields performance close to optimal. New hybrid protocols are proposed that achieve within 20% of the optimal delay in homogeneous systems, as well as within 25% of the optimal maximum client delay in all heterogeneous scenarios considered.In systems utilizing both service aggregation and replication, well-designed policies determining which replica serves each request must balance the objectives of achieving high locality of service, and high efficiency of service aggregation. By comparing classes of policies, using both analysis and simulations, this thesis shows that there are significant performance advantages in using current system state information (rather than only proximities and average loads) and in deferring selection decisions when possible. Most of these performance gains can be achieved using only “local” (rather than global) request information.Finally, this thesis proposes adaptations of already proposed peer-assisted download techniques to support a streaming (rather than download) service, enabling playback to begin well before the entire media file is received. These protocols split each file into pieces, which can be downloaded from multiple sources, including other clients downloading the same file. Using simulations, a candidate protocol is presented and evaluated. The protocol includes both a piece selection technique that effectively mediates the conflict between achieving high piece diversity and the in-order requirements of media file playback, as well as a simple on-line rule for deciding when playback can safely commence

Random Linear Network Coding for Wireless Layered Video Broadcast: General Design Methods for Adaptive Feedback-free Transmission

This paper studies the problem of broadcasting layered video streams over heterogeneous single-hop wireless networks using feedback-free random linear network coding (RLNC). We combine RLNC with unequal error protection (UEP) and our main purpose is twofold. First, to systematically investigate the benefits of UEP+RLNC layered approach in servicing users with different reception capabilities. Second, to study the effect of not using feedback, by comparing feedback-free schemes with idealistic full-feedback schemes. To these ends, we study `expected percentage of decoded frames' as a key content-independent performance metric and propose a general framework for calculation of this metric, which can highlight the effect of key system, video and channel parameters. We study the effect of number of layers and propose a scheme that selects the optimum number of layers adaptively to achieve the highest performance. Assessing the proposed schemes with real H.264 test streams, the trade-offs among the users' performances are discussed and the gain of adaptive selection of number of layers to improve the trade-offs is shown. Furthermore, it is observed that the performance gap between the proposed feedback-free scheme and the idealistic scheme is very small and the adaptive selection of number of video layers further closes the gap.Comment: 15 pages, 12 figures, 3 tables, Under 2nd round of review, IEEE Transactions on Communication

A STUDY OF ERASURE CORRECTING CODES

This work focus on erasure codes, particularly those that of high performance, and the related decoding algorithms, especially with low computational complexity. The work is composed of different pieces, but the main components are developed within the following two main themes. Ideas of message passing are applied to solve the erasures after the transmission. Efficient matrix-representation of the belief propagation (BP) decoding algorithm on the BEG is introduced as the recovery algorithm. Gallager's bit-flipping algorithm are further developed into the guess and multi-guess algorithms especially for the application to recover the unsolved erasures after the recovery algorithm. A novel maximum-likelihood decoding algorithm, the In-place algorithm, is proposed with a reduced computational complexity. A further study on the marginal number of correctable erasures by the In-place algoritinn determines a lower bound of the average number of correctable erasures. Following the spirit in search of the most likable codeword based on the received vector, we propose a new branch-evaluation- search-on-the-code-tree (BESOT) algorithm, which is powerful enough to approach the ML performance for all linear block codes. To maximise the recovery capability of the In-place algorithm in network transmissions, we propose the product packetisation structure to reconcile the computational complexity of the In-place algorithm. Combined with the proposed product packetisation structure, the computational complexity is less than the quadratic complexity bound. We then extend this to application of the Rayleigh fading channel to solve the errors and erasures. By concatenating an outer code, such as BCH codes, the product-packetised RS codes have the performance of the hard-decision In-place algorithm significantly better than that of the soft-decision iterative algorithms on optimally designed LDPC codes