Joint Bilateral Filter for Signal Recovery from Phase Preserved Curvelet Coefficients for Image Denoising

Thresholding of Curvelet Coefficients, for image denoising, drains out subtle signal component in noise subspace. This produces ringing artifacts near edges and granular effect in the denoised image. We found the noise sensitivity of Curvelet phases (in contrast to their magnitude) reduces with higher noise level. Thus, we preserved the phase of the coefficients below threshold at coarser scale and estimated their magnitude by Joint Bilateral Filtering (JBF) technique from the thresholded and noisy coefficients. In the finest scale, we apply Bilateral Filter (BF) to keep edge information. Further, the Guided Image Filter (GIF) is applied on the reconstructed image to localize the edges and to preserve the small image details and textures. The lower noise sensitivity of Curvelet phase at higher noise strength accelerate the performance of proposed method over several state-of-theart techniques and provides comparable outcome at lower noise levels.Comment: 10 pages, 8 figures. 3 tables, journa

Effective denoising and classification of hyperspectral images using curvelet transform and singular spectrum analysis

Hyperspectral imaging (HSI) classification has become a popular research topic in recent years, and effective feature extraction is an important step before the classification task. Traditionally, spectral feature extraction techniques are applied to the HSI data cube directly. This paper presents a novel algorithm for HSI feature extraction by exploiting the curvelet transformed domain via a relatively new spectral feature processing technique – singular spectrum analysis (SSA). Although the wavelet transform has been widely applied for HSI data analysis, the curvelet transform is employed in this paper since it is able to separate image geometric details and background noise effectively. Using the support vector machine (SVM) classifier, experimental results have shown that features extracted by SSA on curvelet coefficients have better performance in terms of classification accuracies over features extracted on wavelet coefficients. Since the proposed approach mainly relies on SSA for feature extraction on the spectral dimension, it actually belongs to the spectral feature extraction category. Therefore, the proposed method has also been compared with some state-of-the-art spectral feature extraction techniques to show its efficacy. In addition, it has been proven that the proposed method is able to remove the undesirable artefacts introduced during the data acquisition process as well. By adding an extra spatial post-processing step to the classified map achieved using the proposed approach, we have shown that the classification performance is comparable with several recent spectral-spatial classification methods

Analysis of Different Filters for Image Despeckling : A Review

Digital image acquisition and processing in clinical diagnosis plays a significant part. Medical images at the time of acquisition can be corrupted via noise. Removal of this noise from images is a challenging problem. The presence of signal dependent noise is referred as speckle which degrades the actual quality of an image. Considering, several techniques have been developed focused on speckle noise reduction. The primary purpose of these techniques was to improve visualization of an image followed by preprocessing step for segmentation, feature extraction and registration. The scope of this paper is to provide an overview of despeckling techniques

水中イメージングシステムのための画質改善に関する研究

Underwater survey systems have numerous scientific or industrial applications in the fields of geology, biology, mining, and archeology. These application fields involve various tasks such as ecological studies, environmental damage assessment, and ancient prospection. During two decades, underwater imaging systems are mainly equipped by Underwater Vehicles (UV) for surveying in water or ocean. Challenges associated with obtaining visibility of objects have been difficult to overcome due to the physical properties of the medium. In the last two decades, sonar is usually used for the detection and recognition of targets in the ocean or underwater environment. However, because of the low quality of images by sonar imaging, optical vision sensors are then used instead of it for short range identification. Optical imaging provides short-range, high-resolution visual information of the ocean floor. However, due to the light transmission’s physical properties in the water medium, the optical imaged underwater images are usually performance as poor visibility. Light is highly attenuated when it travels in the ocean. Consequence, the imaged scenes result as poorly contrasted and hazy-like obstructions. The underwater imaging processing techniques are important to improve the quality of underwater images. As mentioned before, underwater images have poor visibility because of the medium scattering and light distortion. In contrast to common photographs, underwater optical images suffer from poor visibility owing to the medium, which causes scattering, color distortion, and absorption. Large suspended particles cause scattering similar to the scattering of light in fog or turbid water that contain many suspended particles. Color distortion occurs because different wavelengths are attenuated to different degrees in water; consequently, images of ambient in the underwater environments are dominated by a bluish tone, because higher wavelengths are attenuated more quickly. Absorption of light in water substantially reduces its intensity. The random attenuation of light causes a hazy appearance as the light backscattered by water along the line of sight considerably degrades image contrast. Especially, objects at a distance of more than 10 meters from the observation point are almost unreadable because colors are faded as characteristic wavelengths, which are filtered according to the distance traveled by light in water. So, traditional image processing methods are not suitable for processing them well. This thesis proposes strategies and solutions to tackle the above mentioned problems of underwater survey systems. In this thesis, we contribute image pre-processing, denoising, dehazing, inhomogeneities correction, color correction and fusion technologies for underwater image quality improvement. The main content of this thesis is as follows. First, comprehensive reviews of the current and most prominent underwater imaging systems are provided in Chapter 1. A main features and performance based classification criterion for the existing systems is presented. After that, by analyzing the challenges of the underwater imaging systems, a hardware based approach and non-hardware based approach is introduced. In this thesis, we are concerned about the image processing based technologies, which are one of the non-hardware approaches, and take most recent methods to process the low quality underwater images. As the different sonar imaging systems applied in much equipment, such as side-scan sonar, multi-beam sonar. The different sonar acquires different images with different characteristics. Side-scan sonar acquires high quality imagery of the seafloor with very high spatial resolution but poor locational accuracy. On the contrast, multi-beam sonar obtains high precision position and underwater depth in seafloor points. In order to fully utilize all information of these two types of sonars, it is necessary to fuse the two kinds of sonar data in Chapter 2. Considering the sonar image forming principle, for the low frequency curvelet coefficients, we use the maximum local energy method to calculate the energy of two sonar images. For the high frequency curvelet coefficients, we take absolute maximum method as a measurement. The main attributes are: firstly, the multi-resolution analysis method is well adapted the cured-singularities and point-singularities. It is useful for sonar intensity image enhancement. Secondly, maximum local energy is well performing the intensity sonar images, which can achieve perfect fusion result [42]. In Chapter 3, as analyzed the underwater laser imaging system, a Bayesian Contourlet Estimator of Bessel K Form (BCE-BKF) based denoising algorithm is proposed. We take the BCE-BKF probability density function (PDF) to model neighborhood of contourlet coefficients. After that, according to the proposed PDF model, we design a maximum a posteriori (MAP) estimator, which relies on a Bayesian statistics representation of the contourlet coefficients of noisy images. The denoised laser images have better contrast than the others. There are three obvious virtues of the proposed method. Firstly, contourlet transform decomposition prior to curvelet transform and wavelet transform by using ellipse sampling grid. Secondly, BCE-BKF model is more effective in presentation of the noisy image contourlet coefficients. Thirdly, the BCE-BKF model takes full account of the correlation between coefficients [107]. In Chapter 4, we describe a novel method to enhance underwater images by dehazing. In underwater optical imaging, absorption, scattering, and color distortion are three major issues in underwater optical imaging. Light rays traveling through water are scattered and absorbed according to their wavelength. Scattering is caused by large suspended particles that degrade optical images captured underwater. Color distortion occurs because different wavelengths are attenuated to different degrees in water; consequently, images of ambient underwater environments are dominated by a bluish tone. Our key contribution is to propose a fast image and video dehazing algorithm, to compensate the attenuation discrepancy along the propagation path, and to take the influence of the possible presence of an artificial lighting source into consideration [108]. In Chapter 5, we describe a novel method of enhancing underwater optical images or videos using guided multilayer filter and wavelength compensation. In certain circumstances, we need to immediately monitor the underwater environment by disaster recovery support robots or other underwater survey systems. However, due to the inherent optical properties and underwater complex environment, the captured images or videos are distorted seriously. Our key contributions proposed include a novel depth and wavelength based underwater imaging model to compensate for the attenuation discrepancy along the propagation path and a fast guided multilayer filtering enhancing algorithm. The enhanced images are characterized by a reduced noised level, better exposure of the dark regions, and improved global contrast where the finest details and edges are enhanced significantly [109]. The performance of the proposed approaches and the benefits are concluded in Chapter 6. Comprehensive experiments and extensive comparison with the existing related techniques demonstrate the accuracy and effect of our proposed methods.九州工業大学博士学位論文 学位記番号:工博甲第367号　学位授与年月日:平成26年3月25日CHAPTER 1 INTRODUCTION|CHAPTER 2 MULTI-SOURCE IMAGES FUSION|CHAPTER 3 LASER IMAGES DENOISING|CHAPTER 4 OPTICAL IMAGE DEHAZING|CHAPTER 5 SHALLOW WATER DE-SCATTERING|CHAPTER 6 CONCLUSIONS九州工業大学平成25年

Directional edge and texture representations for image processing

An efficient representation for natural images is of fundamental importance in image processing and analysis. The commonly used separable transforms such as wavelets axe not best suited for images due to their inability to exploit directional regularities such as edges and oriented textural patterns; while most of the recently proposed directional schemes cannot represent these two types of features in a unified transform. This thesis focuses on the development of directional representations for images which can capture both edges and textures in a multiresolution manner. The thesis first considers the problem of extracting linear features with the multiresolution Fourier transform (MFT). Based on a previous MFT-based linear feature model, the work extends the extraction method into the situation when the image is corrupted by noise. The problem is tackled by the combination of a "Signal+Noise" frequency model, a refinement stage and a robust classification scheme. As a result, the MFT is able to perform linear feature analysis on noisy images on which previous methods failed. A new set of transforms called the multiscale polar cosine transforms (MPCT) are also proposed in order to represent textures. The MPCT can be regarded as real-valued MFT with similar basis functions of oriented sinusoids. It is shown that the transform can represent textural patches more efficiently than the conventional Fourier basis. With a directional best cosine basis, the MPCT packet (MPCPT) is shown to be an efficient representation for edges and textures, despite its high computational burden. The problem of representing edges and textures in a fixed transform with less complexity is then considered. This is achieved by applying a Gaussian frequency filter, which matches the disperson of the magnitude spectrum, on the local MFT coefficients. This is particularly effective in denoising natural images, due to its ability to preserve both types of feature. Further improvements can be made by employing the information given by the linear feature extraction process in the filter's configuration. The denoising results compare favourably against other state-of-the-art directional representations

Restoration for blurred noisy images based on guided filtering and inverse filter

The development of complex life leads into a need using images in several fields, because these images degraded during capturing the image from mobiles, cameras and persons who do not have sufficient experience in capturing images. It was important using techniques differently to improve images and human perception as image enhancement and image restoration etc. In this paper, restoration noisy blurred images by guided filter and inverse filtering can be used for enhancing images from different types of degradation was proposed. In the color images denoising process, it was very significant for improving the edge and texture information. Eliminating noise can be enhanced by the image quality. In this article, at first, The color images were taken. Then, random noise and blur were added to the images. Then, the noisy blurred image passed to the guided filtering to get on denoised image. Finally, an inverse filter applied to the blurred image by convolution an image with a mask and getting on the enhanced image. The results of this research illustrated good outcomes compared with other methods for removing noise and blur based on PSNR measure. Also, it enhanced the image and retained the edge details in the denoising process. PSNR and SSIM measures were more sensitive to Gaussian noise than blur

Information selection and fusion in vision systems

Handling the enormous amounts of data produced by data-intensive imaging systems, such as multi-camera surveillance systems and microscopes, is technically challenging. While image and video compression help to manage the data volumes, they do not address the basic problem of information overflow. In this PhD we tackle the problem in a more drastic way. We select information of interest to a specific vision task, and discard the rest. We also combine data from different sources into a single output product, which presents the information of interest to end users in a suitable, summarized format. We treat two types of vision systems. The first type is conventional light microscopes. During this PhD, we have exploited for the first time the potential of the curvelet transform for image fusion for depth-of-field extension, allowing us to combine the advantages of multi-resolution image analysis for image fusion with increased directional sensitivity. As a result, the proposed technique clearly outperforms state-of-the-art methods, both on real microscopy data and on artificially generated images. The second type is camera networks with overlapping fields of view. To enable joint processing in such networks, inter-camera communication is essential. Because of infrastructure costs, power consumption for wireless transmission, etc., transmitting high-bandwidth video streams between cameras should be avoided. Fortunately, recently designed 'smart cameras', which have on-board processing and communication hardware, allow distributing the required image processing over the cameras. This permits compactly representing useful information from each camera. We focus on representing information for people localization and observation, which are important tools for statistical analysis of room usage, quick localization of people in case of building fires, etc. To further save bandwidth, we select which cameras should be involved in a vision task and transmit observations only from the selected cameras. We provide an information-theoretically founded framework for general purpose camera selection based on the Dempster-Shafer theory of evidence. Applied to tracking, it allows tracking people using a dynamic selection of as little as three cameras with the same accuracy as when using up to ten cameras

A Tutorial on Speckle Reduction in Synthetic Aperture Radar Images

Speckle is a granular disturbance, usually modeled as a multiplicative noise, that affects synthetic aperture radar (SAR) images, as well as all coherent images. Over the last three decades, several methods have been proposed for the reduction of speckle, or despeckling, in SAR images. Goal of this paper is making a comprehensive review of despeckling methods since their birth, over thirty years ago, highlighting trends and changing approaches over years. The concept of fully developed speckle is explained. Drawbacks of homomorphic filtering are pointed out. Assets of multiresolution despeckling, as opposite to spatial-domain despeckling, are highlighted. Also advantages of undecimated, or stationary, wavelet transforms over decimated ones are discussed. Bayesian estimators and probability density function (pdf) models in both spatial and multiresolution domains are reviewed. Scale-space varying pdf models, as opposite to scale varying models, are promoted. Promising methods following non-Bayesian approaches, like nonlocal (NL) filtering and total variation (TV) regularization, are reviewed and compared to spatial- and wavelet-domain Bayesian filters. Both established and new trends for assessment of despeckling are presented. A few experiments on simulated data and real COSMO-SkyMed SAR images highlight, on one side the costperformance tradeoff of the different methods, on the other side the effectiveness of solutions purposely designed for SAR heterogeneity and not fully developed speckle. Eventually, upcoming methods based on new concepts of signal processing, like compressive sensing, are foreseen as a new generation of despeckling, after spatial-domain and multiresolution-domain method

Machine Learning And Image Processing For Noise Removal And Robust Edge Detection In The Presence Of Mixed Noise

The central goal of this dissertation is to design and model a smoothing filter based on the random single and mixed noise distribution that would attenuate the effect of noise while preserving edge details. Only then could robust, integrated and resilient edge detection methods be deployed to overcome the ubiquitous presence of random noise in images. Random noise effects are modeled as those that could emanate from impulse noise, Gaussian noise and speckle noise. In the first step, evaluation of methods is performed based on an exhaustive review on the different types of denoising methods which focus on impulse noise, Gaussian noise and their related denoising filters. These include spatial filters (linear, non-linear and a combination of them), transform domain filters, neural network-based filters, numerical-based filters, fuzzy based filters, morphological filters, statistical filters, and supervised learning-based filters. In the second step, switching adaptive median and fixed weighted mean filter (SAMFWMF) which is a combination of linear and non-linear filters, is introduced in order to detect and remove impulse noise. Then, a robust edge detection method is applied which relies on an integrated process including non-maximum suppression, maximum sequence, thresholding and morphological operations. The results are obtained on MRI and natural images. In the third step, a combination of transform domain-based filter which is a combination of dual tree – complex wavelet transform (DT-CWT) and total variation, is introduced in order to detect and remove Gaussian noise as well as mixed Gaussian and Speckle noise. Then, a robust edge detection is applied in order to track the true edges. The results are obtained on medical ultrasound and natural images. In the fourth step, a smoothing filter, which is a feed-forward convolutional network (CNN) is introduced to assume a deep architecture, and supported through a specific learning algorithm, l2 loss function minimization, a regularization method, and batch normalization all integrated in order to detect and remove impulse noise as well as mixed impulse and Gaussian noise. Then, a robust edge detection is applied in order to track the true edges. The results are obtained on natural images for both specific and non-specific noise-level