1,077 research outputs found
A Communication Monitor for Wireless Sensor Networks Based on Software Defined Radio
Link quality estimation of reliability-crucial wireless sensor networks (WSNs) is often limited by the observability and testability of single-chip radio transceivers. The estimation is often based on collection of packer-level statistics, including packet reception rate, or vendor-specific registers, such as CC2420's Received Signal Strength Indicator (RSSI) and Link Quality Indicator (LQI). The speed or accuracy of such metrics limits the performance of reliability mechanisms built in wireless sensor networks. To improve link quality estimation in WSNs, we designed a powerful wireless communication monitor based on Software Defined Radio (SDR). We studied the relations between three implemented link quality metrics and packet reception rate under different channel conditions. Based on a comparison of the metrics' relative advantages, we proposed using a combination of them for fast and accurate estimation of a sensor network link
Experimental demonstration of digital predistortion for orthogonal frequency-division multiplexing-radio over fibre links near laser resonance
Radio over fibre (RoF), an enabling technology for distribution of wireless broadband service signals through analogue optical links, suffers from non-linear distortion. Digital predistortion has been demonstrated as an effective approach to overcome the RoF non-linearity. However, questions remain as to how the approach performs close to laser resonance, a region of significant dynamic non-linearity, and how resilient the approach is to changes in input signal and link operating conditions. In this work, the performance of a digital predistortion approach is studied for directly modulated orthogonal frequency-division multiplexing RoF links operating from 2.47 to 3.7 GHz. It extends previous works to higher frequencies, and to higher quadrature amplitude modulation (QAM) levels. In addition, the resilience of the predistortion approach to changes in modulation level of QAM schemes, and average power levels are investigated, and a novel predistortion training approach is proposed and demonstrated. Both memoryless and memory polynomial predistorter models, and a simple off-line least-squares-based identification method, are used, with excellent performance improvements demonstrated up to 3.0 GHz
MIMO Transmission with Residual Transmit-RF Impairments
Physical transceiver implementations for multiple-input multiple-output
(MIMO) wireless communication systems suffer from transmit-RF (Tx-RF)
impairments. In this paper, we study the effect on channel capacity and
error-rate performance of residual Tx-RF impairments that defy proper
compensation. In particular, we demonstrate that such residual distortions
severely degrade the performance of (near-)optimum MIMO detection algorithms.
To mitigate this performance loss, we propose an efficient algorithm, which is
based on an i.i.d. Gaussian model for the distortion caused by these
impairments. In order to validate this model, we provide measurement results
based on a 4-stream Tx-RF chain implementation for MIMO orthogonal
frequency-division multiplexing (OFDM).Comment: to be presented at the International ITG Workshop on Smart Antennas -
WSA 201
Distributed multi-user MIMO transmission using real-time sigma-delta-over-fiber for next generation fronthaul interface
To achieve the massive device connectivity and high data rate demanded by 5G, wireless transmission with wider signal bandwidths and higher-order multiple-input multiple-output (MIMO) is inevitable. This work demonstrates a possible function split option for the next generation fronthaul interface (NGFI). The proof-of-concept downlink architecture consists of real-time sigma-delta modulated signal over fiber (SDoF) links in combination with distributed multi-user (MU) MIMO transmission. The setup is fully implemented using off-the-shelf and in-house developed components. A single SDoF link achieves an error vector magnitude (EVM) of 3.14% for a 163.84 MHz-bandwidth 256-QAM OFDM signal (958.64 Mbps) with a carrier frequency around 3.5 GHz transmitted over 100 m OM4 multi-mode fiber at 850 nm using a commercial QSFP module. The centralized architecture of the proposed setup introduces no frequency asynchronism among remote radio units. For most cases, the 2 x 2 MU-MIMO transmission has little performance degradation compared to SISO, 0.8 dB EVM degradation for 40.96 MHz-bandwidth signals and 1.4 dB for 163.84 MHz-bandwidth on average, implying that the wireless spectral efficiency almost doubles by exploiting spatial multiplexing. A 1.4 Gbps data rate (720 Mbps per user, 163.84 MHz-bandwidth, 64-QAM) is reached with an average EVM of 6.66%. The performance shows that this approach is feasible for the high-capacity hot-spot scenario
Demonstration of wireless backhauling over long-reach PONs
An IEEE 802.16e-2005 (WiMAX) compliant, longreach passive optical network is demonstrated, focusing on the development of next generation optical access with transparent wireless backhauling. In addition to the extended feeder reach, a wavelength band overlay is used to enhance network scalability by maintaining passive splitting in the field and with some design modification at the optical line terminal and remote base station. Radio-over-fiber is used to minimize network installation and maintenance costs through the use of simple remote radio heads complemented by frequency division multiplexing to address individual base stations. The implementation of overlapping radio cells/sectors is also proposed to provide joint signal processing at wireless user terminals. Experimental measurements confirmed EVMs below -30 and -23 dB downstream and upstream, respectively, over fiber link lengths of up to 84.6 km. In addition, adjacent channel leakage ratio measurements demonstrated that a figure of -45 dB with 40 MHz subcarrier spacing, as specified by the standard, can be readily achieved.Peer reviewe
Nonlinearity and Noise Effects in Multi-level Signal Millimeter-Wave over Fiber Transmission using Single- and Dual-Wavelength Modulation
We transmit multilevel quadrature amplitude modulation (QAM) data-IEEE 802.16 schemes-at 20 MSps and an orthogonal frequency-division multiplexing (OFDM) 802.11 g signal (54 Mbps) with a 25 GHz millimeter-wave over fiber system, which employs a dual wavelength source, over 20 km of single mode fiber. Downlink data transmission is successfully demonstrated over both optical and wireless (up to 12 m) paths with good error vector magnitude. An analysis of two different schemes, in which data is applied to one (single) and both (dual) of the wavelengths of a dual wavelength source, is carried out. The system performance is analyzed through simulation and a good match with experimental results is obtained. The analysis investigates the impact of Mach-Zehnder modulator (MZM) and RF amplifier nonlinearity and various noise sources, such as laser relative intensity noise, amplified spontaneous emission, thermal, and shot noise. A comparison of single carrier QAM IEEE 802.16 and OFDM in terms of their sensitivity to the distortions from MZM and RF amplifier nonlinearity is also presented
Reciprocity Calibration for Massive MIMO: Proposal, Modeling and Validation
This paper presents a mutual coupling based calibration method for
time-division-duplex massive MIMO systems, which enables downlink precoding
based on uplink channel estimates. The entire calibration procedure is carried
out solely at the base station (BS) side by sounding all BS antenna pairs. An
Expectation-Maximization (EM) algorithm is derived, which processes the
measured channels in order to estimate calibration coefficients. The EM
algorithm outperforms current state-of-the-art narrow-band calibration schemes
in a mean squared error (MSE) and sum-rate capacity sense. Like its
predecessors, the EM algorithm is general in the sense that it is not only
suitable to calibrate a co-located massive MIMO BS, but also very suitable for
calibrating multiple BSs in distributed MIMO systems.
The proposed method is validated with experimental evidence obtained from a
massive MIMO testbed. In addition, we address the estimated narrow-band
calibration coefficients as a stochastic process across frequency, and study
the subspace of this process based on measurement data. With the insights of
this study, we propose an estimator which exploits the structure of the process
in order to reduce the calibration error across frequency. A model for the
calibration error is also proposed based on the asymptotic properties of the
estimator, and is validated with measurement results.Comment: Submitted to IEEE Transactions on Wireless Communications,
21/Feb/201
Low-Complexity Sub-band Digital Predistortion for Spurious Emission Suppression in Noncontiguous Spectrum Access
Noncontiguous transmission schemes combined with high power-efficiency
requirements pose big challenges for radio transmitter and power amplifier (PA)
design and implementation. Due to the nonlinear nature of the PA, severe
unwanted emissions can occur, which can potentially interfere with neighboring
channel signals or even desensitize the own receiver in frequency division
duplexing (FDD) transceivers. In this article, to suppress such unwanted
emissions, a low-complexity sub-band DPD solution, specifically tailored for
spectrally noncontiguous transmission schemes in low-cost devices, is proposed.
The proposed technique aims at mitigating only the selected spurious
intermodulation distortion components at the PA output, hence allowing for
substantially reduced processing complexity compared to classical linearization
solutions. Furthermore, novel decorrelation based parameter learning solutions
are also proposed and formulated, which offer reduced computing complexity in
parameter estimation as well as the ability to track time-varying features
adaptively. Comprehensive simulation and RF measurement results are provided,
using a commercial LTE-Advanced mobile PA, to evaluate and validate the
effectiveness of the proposed solution in real world scenarios. The obtained
results demonstrate that highly efficient spurious component suppression can be
obtained using the proposed solutions
- …