A Heuristic Method for Task Selection in Persistent ISR Missions Using Autonomous Unmanned Aerial Vehicles

The Persistent Intelligence, Surveillance, and Reconnaissance (PISR) problem seeks to provide timely collection and delivery of data from prioritized ISR tasks using an autonomous Unmanned Aerial Vehicle (UAV). In the literature, PISR is classified as a type of Vehicle Routing Problem (VRP), often called by other names such as persistent monitoring, persistent surveillance, and patrolling. The objective of PISR is to minimize the weighted revisit time to each task (called weighted latency) using an optimal task selection algorithm. In this research, we utilize the average weighted latency as our performance metric and investigate a method for task selection called the Maximal Distance Discounted and Weighted Revisit Period (MD2WRP) utility function. The MD2WRP function is a heuristic method of task selection that uses n+1 parameters, where n is the number of PISR tasks. We develop a two-step optimization method for the MD2WRP parameters to deliver optimal latency performance for any given task configuration, which accommodates both single and multi-vehicle scenarios. To validate our optimization method, we compare the performance of MD2WRP to common Traveling Salesman Problem (TSP) methods for PISR using different task configurations. We find that the optimized MD2WRP function is competitive with the TSP methods, and that MD2WRP often results in steady-state task visit sequences that are equivalent to the TSP solution for a single vehicle. We also compare MD2WRP to other utility methods from the literature, finding thatMD2WRP performs on par with or better than these other methods even when optimizing only one of its n + 1 parameters. To address real-world operational factors, we test MD2WRP with Dubins constraints, no-y zones in the operational area, return-to-base requirements, and the addition and removal of vehicles and tasks mid-mission. For each operational factor, we demonstrate its effect on PISR task selections using MD2WRP and how MD2WRP needs to be modified, if at all, to compensate. Finally, we make practical suggestions about implementing MD2WRP for flight testing, outline potential areas for future study, and offer recommendations about the conduct of PISR missions in general

Field Operation Planning for Agricultural Vehicles: A Hierarchical Modeling Framework

Rosana G. Moreira, Editor-in-Chief; Texas A&M UniversityThis is a paper from International Commission of Agricultural Engineering (CIGR, Commission Internationale du Genie Rural) E-Journal Volume 9 (2007): Field Operation Planning for Agricultural Vehicles: A Hierarchical Modeling Framework. Manuscript PM 06 021. Vol. IX. February, 2007

Dynamic Vehicle Routing for Robotic Systems

Recent years have witnessed great advancements in the science and technology of autonomy, robotics, and networking. This paper surveys recent concepts and algorithms for dynamic vehicle routing (DVR), that is, for the automatic planning of optimal multivehicle routes to perform tasks that are generated over time by an exogenous process. We consider a rich variety of scenarios relevant for robotic applications. We begin by reviewing the basic DVR problem: demands for service arrive at random locations at random times and a vehicle travels to provide on-site service while minimizing the expected wait time of the demands. Next, we treat different multivehicle scenarios based on different models for demands (e.g., demands with different priority levels and impatient demands), vehicles (e.g., motion constraints, communication, and sensing capabilities), and tasks. The performance criterion used in these scenarios is either the expected wait time of the demands or the fraction of demands serviced successfully. In each specific DVR scenario, we adopt a rigorous technical approach that relies upon methods from queueing theory, combinatorial optimization, and stochastic geometry. First, we establish fundamental limits on the achievable performance, including limits on stability and quality of service. Second, we design algorithms, and provide provable guarantees on their performance with respect to the fundamental limits.United States. Air Force Office of Scientific Research (Award FA 8650-07-2-3744)United States. Army Research Office. Multidisciplinary University Research Initiative (Award W911NF-05-1-0219)National Science Foundation (U.S.) (Award ECCS-0705451)National Science Foundation (U.S.) (Award CMMI-0705453)United States. Army Research Office (Award W911NF-11-1-0092

Improved Bounds on Information Dissemination by Manhattan Random Waypoint Model

With the popularity of portable wireless devices it is important to model and predict how information or contagions spread by natural human mobility -- for understanding the spreading of deadly infectious diseases and for improving delay tolerant communication schemes. Formally, we model this problem by considering $M$ moving agents, where each agent initially carries a \emph{distinct} bit of information. When two agents are at the same location or in close proximity to one another, they share all their information with each other. We would like to know the time it takes until all bits of information reach all agents, called the \textit{flood time}, and how it depends on the way agents move, the size and shape of the network and the number of agents moving in the network. We provide rigorous analysis for the \MRWP model (which takes paths with minimum number of turns), a convenient model used previously to analyze mobile agents, and find that with high probability the flood time is bounded by $O\big(N\log M\lceil(N/M) \log(NM)\rceil\big)$, where $M$ agents move on an $N\times N$ grid. In addition to extensive simulations, we use a data set of taxi trajectories to show that our method can successfully predict flood times in both experimental settings and the real world.Comment: 10 pages, ACM SIGSPATIAL 2018, Seattle, U

Reitinsuunnittelu määrätyssä järjestyksessä tehtäville peltotöille usean työkoneen yhteistyönä

Coverage path planning is the task of finding a collision free path that passes over every point of an area or volume of interest. In agriculture, the coverage task is encountered especially in the process of crop cultivation. Several tasks are performed on the field, one after the other, during the cultivation cycle. Cooperation means that multiple agents, in this case vehicles, are working together towards a common goal. Several studies consider the problem where a single task is divided and assigned among the agents. In this thesis, however, the vehicles have different tasks that are sequentially dependent, that is, the first task must be completed before the other. The tasks are performed simultaneously on the same area. The literature review suggests that there is a lack of previous research on this topic. The objective of this thesis was to develop an algorithm to solve the cooperative coverage path planning problem for sequentially dependent tasks. A tool chain that involves Matlab, Simulink and Visual Studio was adapted for the development and testing of the solution. A development and testing architecture was designed including a compatible interface to a simulation and a real-life test environment. Two different algorithms were implemented based on the idea of computing short simultaneous paths at a time and scheduling them in real-time. The results were successfully demonstrated in a real-life test environment with two tractors equipped with a disc cultivator and a seeder. The objective was to sow the test area. The test drives show that with the algorithms that were developed in this thesis it is possible to perform two sequentially dependent agricultural coverage tasks simultaneously on the same area.Kattavassa reitinsuunnittelussa yritetään löytää polku, jonka aikana määritelty ala tai tilavuus tulee käytyä läpi niin että alueen jokainen piste on käsitelty. Maataloudessa tämä tehtävä on merkityksellinen erityisesti peltoviljelyssä. Useita peltotöitä suoritetaan yksi toisensa jälkeen samalla alueella viljelyvuoden aikana. Useissa tutkimuksissa käsitellään yhteistyönä tehtävää reitinsuunnittelua, jossa yksi tehtävä on jaettu osiin ja osat jaetaan useiden tekijöiden kuten robottien kesken. Tässä diplomityössä peltotyökoneilla on kuitenkin omat erilliset tehtävänsä, joilla on määrätty järjestys, eli niiden suorittaminen riippuu työjärjestyksestä. Työkoneet työskentelevät samanaikaisesti samalla alueella. Diplomityössä tehty kirjallisuuskatsaus viittaa siihen, että vastaavaa aihetta ei ole aiemmin tutkittu. Tämän diplomityön tavoitteena on kehittää algoritmi, jolla voidaan toteuttaa reitinsuunnittelu määrätyssä järjestyksessä tehtäville peltotöille usean peltotyökoneen yhteistyönä. Algoritmikehitystä ja testausta varten suunniteltiin yhtenäinen rajapinta, jolla algoritmia voitaisiin testata sekä simulaatiossa että todellisessa testitilanteessa. Algoritmikehityksessä käytettiin työkaluina Matlab, Simulink ja Visual Studio -ohjelmia. Työssä toteutettiin kaksi algoritmia, jotka perustuvat samaan ideaan: suunnitellaan kerrallaan kaksi lyhyttä samanaikaista polkua, jotka ajoitetaan reaaliajassa. Algoritmeja testattiin todellisessa testiympäristössä kahden työkoneen yhteistyönä, kun tavoitteena on kylvää koko testialue. Ensimmäinen työvaihe suoritettiin lautasmuokkaimella ja toinen kylvökoneella. Testiajot osoittavat, että diplomityössä kehitetyillä algoritmeilla voidaan ohjata kahden toisistaan riippuvaisen peltotyön toteutus samanaikaisesti samalla peltoalueella

Spatial coverage in routing and path planning problems

Routing and path planning problems that involve spatial coverage have received increasing attention in recent years in different application areas. Spatial coverage refers to the possibility of considering nodes that are not directly served by a vehicle as visited for the purpose of the objective function or constraints. Despite similarities between the underlying problems, solution approaches have been developed in different disciplines independently, leading to different terminologies and solution techniques. This paper proposes a unified view of the approaches: Based on a formal introduction of the concept of spatial coverage in vehicle routing, it presents a classification scheme for core problem features and summarizes problem variants and solution concepts developed in the domains of operations research and robotics. The connections between these related problem classes offer insights into common underlying structures and open possibilities for developing new applications and algorithms

An Information Value Approach to Route Planning for UAV Search and Track Missions

This dissertation has three contributions in the area of path planning for Unmanned Aerial Vehicle (UAV) Search And Track (SAT) missions. These contributions are: (a) the study of a novel metric, G, used to quantify the value of the target information gained during a search and track mission, (b) an optimal planning horizon that minimizes time-error of a planning horizon when interrupted by Poisson random events, and (c) a modified Particle Swarm Optimization (PSO) algorithm for search missions that uses the prior target distribution in the generation of paths rather than just in the evaluation of them. UAV route planning is an important topic with many applications. Of these, military applications are the best known. This dissertation focuses on route planning for SAT missions that jointly optimize the conflicting objectives of detecting new targets and monitoring previously detected targets. The information theoretic approach proposed here is different from and is superior to existing approaches. One of the main differences is that G quantifies the value of the target information rather than the information itself. Several examples are provided to highlight G’s desirable properties. Another important component of path planning is the selection of a planning horizon, which specifies the amount of time to include in a plan. Unfortunately, little research is available to aid in the selection of a planning horizon. The proposed planning horizon is derived in the context of plan updates triggered by Poisson random events. To our knowledge, it is the only theoretically derived horizon available making it an important contribution. While the proposed horizon is optimal in minimizing planning time errors, simulation results show that it is also near optimal in minimizing the average time needed to capture an evasive target. The final contribution is the modified PSO. Our modification is based on the idea that PSO should be provided with the target distribution for path generation. This allows the algorithm to create candidate path plans in target rich regions. The modified PSO is studied using a search mission and is used in the study of G