Dynamic hardware-assisted software-controlled page placement to manage capacity allocation and sharing within large caches

Journal ArticleIn future multi-cores, large amounts of delay and power will be spent accessing data in large L2/L3 caches. It has been recently shown that OS-based page coloring allows a non-uniform cache architecture (NUCA) to provide low latencies and not be hindered by complex data search mechanisms. In this work, we extend that concept with mechanisms that dynamically move data within caches. The key innovation is the use of a shadow address space to allow hardware control of data placement in the L2 cache while being largely transparent to the user application and off-chip world. These mechanisms allow the hardware and OS to dynamically manage cache capacity per thread as well as optimize placement of data shared by multiple threads. We show an average IPC improvement of 10-20% for multiprogrammed workloads with capacity allocation policies and an average IPC improvement of 8% for multi-threaded workloads with policies for shared page placement

Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

Instruction-Level Execution Migration

We introduce the Execution Migration Machine (EM²), a novel data-centric multicore memory system architecture based on computation migration. Unlike traditional distributed memory multicores, which rely on complex cache coherence protocols to move the data to the core where the computation is taking place, our scheme always moves the computation to the core where the data resides. By doing away with the cache coherence protocol, we are able to boost the effectiveness of per-core caches while drastically reducing hardware complexity. To evaluate the potential of EM² architectures, we developed a series of PIN/Graphite-based models of an EM² multicore with 64 x86 cores and, under some simplifying assumptions (a timing model restricted to data memory performance, no instruction cache modeling, high-bandwidth fixed-latency interconnect allowing concurrent migrations), compared them against corresponding directory-based cache-coherent architecture models. We justify our assumptions and show that our conclusions are valid even if our assumptions are removed. Experimental results on a range of SPLASH-2 and PARSEC benchmarks indicate that EM2 can significantly improve per-core cache performance, decreasing overall miss rates by as much as 84% and reducing average memory latency by up to 58%

EM2: A Scalable Shared-Memory Multicore Architecture

We introduce the Execution Migration Machine (EM2), a novel, scalable shared-memory architecture for large-scale multicores constrained by off-chip memory bandwidth. EM2 reduces cache miss rates, and consequently off-chip memory usage, by permitting only one copy of data to be stored anywhere in the system: when a thread wishes to access an address not locally cached on the core it is executing on, it migrates to the appropriate core and continues execution. Using detailed simulations of a range of 256-core configurations on the SPLASH-2 benchmark suite, we show that EM2 improves application completion times by 18% on the average while remaining competitive with traditional architectures in silicon area

Towards scalable, energy-efficient, bus-based on-chip networks

Journal ArticleIt is expected that future on-chip networks for many-core processors will impose huge overheads in terms of energy, delay, complexity, verification effort, and area. There is a common belief that the bandwidth necessary for future applications can only be provided by employing packet-switched networks with complex routers and a scalable directory-based coherence protocol. We posit that such a scheme might likely be overkill in a well designed system in addition to being expensive in terms of power because of a large number of power-hungry routers. We show that bus-based networks with snooping protocols can significantly lower energy consumption and simplify network/ protocol design and verification, with no loss in performance. We achieve these characteristics by dividing the chip into multiple segments, each having its own broadcast bus, with these buses further connected by a central bus. This helps eliminate expensive routers, but suffers from the energy overhead of long wires. We propose the use of multiple Bloom filters to effectively track data presence in the cache and restrict bus broadcasts to a subset of segments, significantly reducing energy consumption. We further show that the use of OS page coloring helps maximize locality and improves the effectiveness of the Bloom filters. We also employ low-swing wiring to further reduce the energy overheads of the links. Performance can also be improved at relatively low costs by utilizing more of the abundant metal budgets on-chip and employing multiple address-interleaved buses rather than multiple routers. Thus, with the combination of all the above innovations, we extend the scalability of buses and believe that buses can be a viable and attractive option for future on-chip networks. We show energy reductions of up to 31X on average compared to many state-of-the-art packet switched networks

Jenga: Harnessing Heterogeneous Memories through Reconfigurable Cache Hierarchies

Conventional memory systems are organized as a rigid hierarchy, with multiple levels of progressively larger and slower memories. Hierarchy allows a simple, fixed design to benefit a wide range of applications, because working sets settle at the smallest (and fastest) level they fit in. However, rigid hierarchies also cause significant overheads, because each level adds latency and energy even when it does not capture the working set. In emerging systems with heterogeneous memory technologies such as stacked DRAM, these overheads often limit performance and efficiency. We propose Jenga, a reconfigurable cache hierarchy that avoids these pathologies and approaches the performance of a hierarchy optimized for each application. Jenga monitors application behavior and dynamically builds virtual cache hierarchies out of heterogeneous, distributed cache banks. Jenga uses simple hardware support and a novel software runtime to configure virtual cache hierarchies. On a 36-core CMP with a 1 GB stacked-DRAM cache, Jenga outperforms a combination of state-of-the-art techniques by 10% on average and by up to 36%, and does so while saving energy, improving system-wide energy-delay product by 29% on average and by up to 96%

Quantifying the relationship between the power delivery network and architectural policies in a 3D-stacked memory device

pre-printMany of the pins on a modern chip are used for power delivery. If fewer pins were used to supply the same current, the wires and pins used for power delivery would have to carry larger currents over longer distances. This results in an "IR-drop" problem, where some of the voltage is dropped across the long resistive wires making up the power delivery network, and the eventual circuits experience fluctuations in their supplied voltage. The same problem also manifests if the pin count is the same, but the current draw is higher. IR-drop can be especially problematic in 3D DRAM devices because (i) low cost (few pins and TSVs) is a high priority, (ii) 3D-stacking increases current draw within the package without providing proportionate room for more pins, and (iii) TSVs add to the resistance of the power delivery net-work. This paper is the first to characterize the relationship be- tween the power delivery network and the maximum sup ported activity in a 3D-stacked DRAM memory device. The design of the power delivery network determines if some banks can handle less activity than others. It also deter-mines the combinations of bank activities that are permissible. Both of these attributes can feed into architectural policies. For example, if some banks can handle more activities than others, the architecture benefits by placing data from high-priority threads or data from frequently accessed pages into those banks. The memory controller can also derive higher performance if it schedules requests to specific combinations of banks that do not violate the IR-drop constraint

Hybrid Caching for Chip Multiprocessors Using Compiler-Based Data Classification

The high performance delivered by modern computer system keeps scaling with an increasingnumber of processors connected using distributed network on-chip. As a result, memory accesslatency, largely dominated by remote data cache access and inter-processor communication, is becoming a critical performance bottleneck. To release this problem, it is necessary to localize data access as much as possible while keep efficient on-chip cache memory utilization. Achieving this however, is application dependent and needs a keen insight into the memory access characteristics of the applications. This thesis demonstrates how using fairly simple thus inexpensive compiler analysis memory accesses can be classified into private data access and shared data access. In addition, we introduce a third classification named probably private access and demonstrate the impact of this category compared to traditional private and shared memory classification. The memory access classification information from the compiler analysis is then provided to the runtime system through a modified memory allocator and page table to facilitate a hybrid private-shared caching technique. The hybrid cache mechanism is aware of different data access classification and adopts appropriate placement and search policies accordingly to improve performance. Our analysis demonstrates that many applications have a significant amount of both private and shared data and that compiler analysis can identify the private data effectively for many applications. Experimentsresults show that the implemented hybrid caching scheme achieves 4.03% performance improvement over state of the art NUCA-base caching

Adaptive Resource Management Techniques for High Performance Multi-Core Architectures

Reducing the average memory access time is crucial for improving the performance of applications executing on multi-core architectures. With workload consolidation this becomes increasingly challenging due to shared resource contention. Previous works has proposed techniques for partitioning of shared resources (e.g. cache and bandwidth) and prefetch throttling with the goal of mitigating contention and reducing or hiding average memory access time.Cache partitioning in multi-core architectures is challenging due to the need to determine cache allocations with low computational overhead and the need to place the partitions in a locality-aware manner. The requirement for low computational overhead is important in order to have the capability to scale to large core counts. Previous work within multi-resource management has proposed coordinately managing a subset of the techniques: cache partitioning, bandwidth partitioning and prefetch throttling. However, coordinated management of all three techniques opens up new possible trade-offs and interactions which can be leveraged to gain better performance. This thesis contributes with two different resource management techniques: One resource manger for scalable cache partitioning and a multi-resource management technique for coordinated management of cache partitioning, bandwidth partitioning and prefetching. The scalable resource management technique for cache partitioning uses a distributed and asynchronous cache partitioning algorithm that works together with a flexible NUCA enforcement mechanism in order to give locality-aware placement of data and support fine-grained partitions. The algorithm adapts quickly to application phase changes. The distributed nature of the algorithm together with the low computational complexity, enables the solution to be implemented in hardware and scale to large core counts. The multi-resource management technique for coordinated management of cache partitioning bandwidth partitioning and prefetching is designed using the results from our in-depth characterisation from the entire SPEC CPU2006 suite. The solution consists of three local resource management techniques that together with a coordination mechanism provides allocations which takes the inter-resource interactions and trade-offs into account.Our evaluation shows that the distributed cache partitioning solution performs within 1% from the best known centralized solution, which cannot scale to large core counts. The solution improves performance by 9% and 16%, on average, on a 16 and 64-core multi-core architecture, respectively, compared to a shared last-level cache. The multi-resource management technique gives a performance increase of 11%, on average, over state-of-the-art and improves performance by 50% compared to the baseline 16-core multi-core without cache partitioning, bandwidth partitioning and prefetch throttling