Effect of Clock and Power Gating on Power Distribution Network Noise in 2D and 3D Integrated Circuits

In this work, power supply noise contribution, at a particular node on the power grid, from clock/power gated blocks is maximized at particular time and the synthetic gating patterns of the blocks that result in the maximum noise is obtained for the interval 0 to target time. We utilize wavelet based analysis as wavelets are a natural way of characterizing the time-frequency behavior of the power grid. The gating patterns for the blocks and the maximum supply noise at the Point of Interest at the specified target time obtained via a Linear Programming (LP) formulation (clock gating) and Genetic Algorithm based problem formulation (Power Gating)

Addressing On-Chip Power Conversion and Dissipation Issues in Many-Core System-on-a-Chip based on Conventional Silicon and Emerging Nanotechnologies

Title from PDF of title page viewed August 27, 2018Dissertation advisor: Masud H ChowdhuryVitaIncludes bibliographical references (pages 158-163)Thesis (Ph.D.)--School of Computing and Engineering and Department of Physics and Astronomy. University of Missouri--Kansas City, 2017Integrated circuits (ICs) are moving towards system-on-a-chip (SOC) designs. SOC allows various small and large electronic systems to be implemented in a single chip. This approach enables the miniaturization of design blocks that leads to high density transistor integration, faster response time, and lower fabrication costs. To reap the benefits of SOC and uphold the miniaturization of transistors, innovative power delivery and power dissipation management schemes are paramount. This dissertation focuses on on-chip integration of power delivery systems and managing power dissipation to increase the lifetime of energy storage elements. We explore this problem from two different angels: On-chip voltage regulators and power gating techniques. On-chip voltage regulators reduce parasitic effects, and allow faster and efficient power delivery for microprocessors. Power gating techniques, on the other hand, reduce the power loss incurred by circuit blocks during standby mode. Power dissipation (Ptotal = Pstatic and Pdynamic) in a complementary metal-oxide semiconductor (CMOS) circuit comes from two sources: static and dynamic. A quadratic dependency on the dynamic switching power and a more than linear dependency on static power as a form of gate leakage (subthreshold current) exist. To reduce dynamic power loss, the supply power should be reduced. A significant reduction in power dissipation occurs when portions of a microprocessor operate at a lower voltage level. This reduction in supply voltage is achieved via voltage regulators or converters. Voltage regulators are used to provide a stable power supply to the microprocessor. The conventional off-chip switching voltage regulator contains a passive floating inductor, which is difficult to be implemented inside the chip due to excessive power dissipation and parasitic effects. Additionally, the inductor takes a very large chip area while hampering the scaling process. These limitations make passive inductor based on-chip regulator design very unattractive for SOC integration and multi-/many-core environments. To circumvent the challenges, three alternative techniques based on active circuit elements to replace the passive LC filter of the buck convertor are developed. The first inductorless on-chip switching voltage regulator architecture is based on a cascaded 2nd order multiple feedback (MFB) low-pass filter (LPF). This design has the ability to modulate to multiple voltage settings via pulse with modulation (PWM). The second approach is a supplementary design utilizing a hybrid low drop-out scheme to lower the output ripple of the switching regulator over a wider frequency range. The third design approach allows the integration of an entire power management system within a single chipset by combining a highly efficient switching regulator with an intermittently efficient linear regulator (area efficient), for robust and highly efficient on-chip regulation. The static power (Pstatic) or subthreshold leakage power (Pleak) increases with technology scaling. To mitigate static power dissipation, power gating techniques are implemented. Power gating is one of the popular methods to manage leakage power during standby periods in low-power high-speed IC design. It works by using transistor based switches to shut down part of the circuit block and put them in the idle mode. The efficiency of a power gating scheme involves minimum Ioff and high Ion for the sleep transistor. A conventional sleep transistor circuit design requires an additional header, footer, or both switches to turn off the logic block. This additional transistor causes signal delay and increases the chip area. We propose two innovative designs for next generation sleep transistor designs. For an above threshold operation, we present a sleep transistor design based on fully depleted silicon-on-insulator (FDSOI) device. For a subthreshold circuit operation, we implement a sleep transistor utilizing the newly developed silicon-on ferroelectric-insulator field effect transistor (SOFFET). In both of the designs, the ability to control the threshold voltage via bias voltage at the back gate makes both devices more flexible for sleep transistors design than a bulk MOSFET. The proposed approaches simplify the design complexity, reduce the chip area, eliminate the voltage drop by sleep transistor, and improve power dissipation. In addition, the design provides a dynamically controlled Vt for times when the circuit needs to be in a sleep or switching mode.Introduction -- Background and literature review -- Fully integrated on-chip switching voltage regulator -- Hybrid LDO voltage regulator based on cascaded second order multiple feedback loop -- Single and dual output two-stage on-chip power management system -- Sleep transistor design using double-gate FDSOI -- Subthreshold region sleep transistor design -- Conclusio

Dynamic and Leakage Power Reduction in MTCMOS Circuits Using an Automated Efficient Gate Clustering Technique

Reducing power dissipation is one of the most principle subjects in VLSI design today. Scaling causes subthreshold leakage currents to become a large component of total power dissipation. This paper presents two techniques for efficient gate clustering in MTCMOS circuits by modeling the problem via Bin-Packing (BP) and Set-Partitioning (SP) techniques. An automated solution is presented, and both techniques are applied to six benchmarks to verify functionality. Both methodologies offer significant reduction in both dynamic and leakage power over previous techniques during the active and standby modes respectively. Furthermore, the SP technique takes the circuit's routing complexity into consideration which is critical for Deep Sub-Micron (DSM) implementations. Sufficient performance is achieved, while significantly reducing the overall sleep transistors' area. Results obtained indicate that our proposed techniques can achieve on average 90% savings for leakage power and 15% savings for dynamic power

Conception de dispositifs de contrôle asynchrones et distribués pour la gestion de l’énergie

Today integrated systems are increasingly faced with the constraints of low consumption or energy efficiency. These issues need to be integrated as far upstream as possible in the design flow to reduce design time and avoid much iteration in the flow. In this context, the collaborative project HiCool, between LIRMM and TIMA laboratories, Defacto, Docea and ST Microelectronics companies, has set up a strategy and design flow to design integrated low power systems while facilitating the reuse of existing hardware blocks (IPs). The approach proposed in this thesis fits into this strategy by bringing a small dose of asynchrony in completely synchronous systems. Indeed, the reduction in consumption is based on the observation that permanent activation of the entire circuit is unnecessary in many cases. However, controlling the activity with techniques of "clock gating" or "power gating" usually need to perform a re-design of the system and to add a control device for controlling activation of areas effecting treatment. The work presented in this manuscript provides a strategy based clock controllers and power domain, asynchronous, distributed and easily insertable into a circuit with a low cost design.Les systèmes intégrés sont aujourd’hui de plus en plus fréquemment confrontés à des contraintes de faible consommation ou d’efficacité énergétique. Ces problématiques se doivent d’être intégrées le plus en amont possible dans le flot de conception afin de réduire les temps de design et d’éviter de nombreuses itérations dans le flot. Dans ce contexte, le projet collaboratif HiCool, partenariat entre les laboratoires LIRMM et TIMA, les sociétés Defacto, Docea et ST Microelectronics, a mis en place une stratégie et un flot de conception pour concevoir des systèmes intégrés faible consommation tout en facilitant la réutilisation de blocks matériels (IPs) existants. L’approche proposée dans cette thèse s’intègre dans cette stratégie en apportant une petite dose d’asynchronisme dans des systèmes complètement synchrones. En effet, la réduction de la consommation est basée sur le constat que l’activation permanente de la totalité du circuit est inutile dans bien des cas. Néanmoins, contrôler l’activité avec des techniques de « clock gating » ou de « power gating » nécessitent usuellement d’effectuer un re-design du système et d’ajouter un organe de commande pour contrôler l’activation des zones effectuant un traitement. Le travail présenté dans ce manuscrit définit une stratégie basée sur des contrôleurs d’horloge et de domaine d’alimentation, asynchrones, distribués et facilement insérables dans un circuit avec un coût de re-design des plus réduit