Framework for waveband switching in multigranular optical networks: part I-multigranular cross-connect architectures

Optical networks using wavelength-division multiplexing (WDM) are the foremost solution to the ever-increasing traffic in the Internet backbone. Rapid advances in WDM technology will enable each fiber to carry hundreds or even a thousand wavelengths (using dense-WDM, or DWDM, and ultra-DWDM) of traffic. This, coupled with worldwide fiber deployment, will bring about a tremendous increase in the size of the optical cross-connects, i.e., the number of ports of the wavelength switching elements. Waveband switching (WBS), wherein wavelengths are grouped into bands and switched as a single entity, can reduce the cost and control complexity of switching nodes by minimizing the port count. This paper presents a detailed study on recent advances and open research issues in WBS networks. In this study, we investigate in detail the architecture for various WBS cross-connects and compare them in terms of the number of ports and complexity and also in terms of how flexible they are in adjusting to dynamic traffic. We outline various techniques for grouping wavelengths into bands for the purpose of WBS and show how traditional wavelength routing is different from waveband routing and why techniques developed for wavelength-routed networks (WRNs) cannot be simply applied to WBS networks. We also outline how traffic grooming of subwavelength traffic can be done in WBS networks. In part II of this study [Cao , submitted to J. Opt. Netw.], we study the effect of wavelength conversion on the performance of WBS networks with reconfigurable MG-OXCs. We present an algorithm for waveband grouping in wavelength-convertible networks and evaluate its performance. We also investigate issues related to survivability in WBS networks and show how waveband and wavelength conversion can be used to recover from failures in WBS networks

Design and protection algorithms for path level aggregation of traffic in WDM metro optical networks

Wavelength Division Multiplexing (WDM) promises to offer a cost effective and scalable solution to meet the emerging demands of the Internet. WDM splits the tremendous bandwidth latent in a fiber into multiple non-overlapping wavelength channels, each of which can be operated at the peak electronic rate. Commercial systems with 128 wavelengths and transmission rates of up to 40 Gbps per wavelength have been made possible using state of the art optical technologies to deal with physical impairments. Systems with higher capacities are likely to evolve in the future. The end user requirements for bandwidth, on the other hand, have been ranging from 155 Mbps to 2.5 Gbps. Dedicating a wavelength for each end user will lead to severe underutilization of WDM channels. This brings to forefront the requirement for sharing of bandwidth in a wavelength among multiple end users.;The concept of wavelength sharing among multiple clients is called grooming. Grooming can be done purely at the optical layer (optical grooming) or it can be done with support from the client layer (electronic grooming). The advantage of all optical grooming is the ease of scalability due to its transparency as opposed to electronic grooming which is constrained by electronic bottlenecks. Efforts towards enhancing optical grooming is pursued through increasing optical switching speeds. However, technologies to make optical switches with high speeds, large port counts and low insertion losses have been elusive and may continue to remain so in the near future.;Recently, there have been some research into designing new architectures and protocols focused on optical grooming without resorting to fast optical switching. Typically, this is achieved in three steps: (1) configure the circuit in the form of a path or a tree; (2) use optical devices like couplers or splitters to allow multiple transmitters and/or receivers to share the same circuit; and (3) provide an arbitration mechanism to avoid contention among end users of the circuit. This transparent sharing of the wavelength channel utilizes the network resources better than the conventional low-speed circuit switched approaches. Consequently, it becomes important to quantify the improvement in achieved performance and evaluate if the reaped benefits justify the cost of the required additional hardware and software.;The contribution of this thesis is two fold: (1) developing a new architecture called light-trails as an IP based solution for next generation WDM optical networks, and (2) designing a unified framework to model Path Level Aggregation of Traffic in metrO Optical Networks (PLATOONs). The algorithms suggested here have three features: (1) accounts for four different path level aggregation strategies---namely, point to point (for example, lightpaths), point to multi-point (for example, source based light-trails), multi-point to point (for example, destination based light-trails) and multi-point to multi-point (for example, light-trails); (2) incorporates heterogenous switching architectures; and (3) accommodates multi-rate traffic. Algorithms for network design and survivability are developed for PLATOONs in the presence of both static and dynamic traffic. Connection level dedicated/shared, segregated/mixed protection schemes are formulated for single link failures in the presence of static and dynamic traffic. A simple medium access control protocol that avoids collisions when the channel is shared by multiple clients is also proposed.;Based on extensive simulations, we conclude that, for the studied scenarios, (1) when client layer has no electronic grooming capabilities, light-trails (employing multi-point to multi-point aggregation strategy) perform several orders of magnitude better than lightpaths and (2) when client layer has full electronic grooming capabilities, source based light-trails (employing point to multi-point aggregation strategy) perform the best in wavelength limited scenarios and lightpaths perform the best in transceiver limited scenarios.;The algorithms that are developed here will be helpful in designing optical networks that deploy path level aggregation strategies. The proposed ideas will impact the design of transparent, high-speed all-optical networks.</p

Traffic engineering in dynamic optical networks

Traffic Engineering (TE) refers to all the techniques a Service Provider employs to improve the efficiency and reliability of network operations. In IP over Optical (IPO) networks, traffic coming from upper layers is carried over the logical topology defined by the set of established lightpaths. Within this framework then, TE techniques allow to optimize the configuration of optical resources with respect to an highly dynamic traffic demand. TE can be performed with two main methods: if the demand is known only in terms of an aggregated traffic matrix, the problem of automatically updating the configuration of an optical network to accommodate traffic changes is called Virtual Topology Reconfiguration (VTR). If instead the traffic demand is known in terms of data-level connection requests with sub-wavelength granularity, arriving dynamically from some source node to any destination node, the problem is called Dynamic Traffic Grooming (DTG). In this dissertation new VTR algorithms for load balancing in optical networks based on Local Search (LS) techniques are presented. The main advantage of using LS is the minimization of network disruption, since the reconfiguration involves only a small part of the network. A comparison between the proposed schemes and the optimal solutions found via an ILP solver shows calculation time savings for comparable results of network congestion. A similar load balancing technique has been applied to alleviate congestion in an MPLS network, based on the efficient rerouting of Label-Switched Paths (LSP) from the most congested links to allow a better usage of network resources. Many algorithms have been developed to deal with DTG in IPO networks, where most of the attention is focused on optimizing the physical resources utilization by considering specific constraints on the optical node architecture, while very few attention has been put so far on the Quality of Service (QoS) guarantees for the carried traffic. In this thesis a novel Traffic Engineering scheme is proposed to guarantee QoS from both the viewpoint of service differentiation and transmission quality. Another contribution in this thesis is a formal framework for the definition of dynamic grooming policies in IPO networks. The framework is then specialized for an overlay architecture, where the control plane of the IP and optical level are separated, and no information is shared between the two. A family of grooming policies based on constraints on the number of hops and on the bandwidth sharing degree at the IP level is defined, and its performance analyzed in both regular and irregular topologies. While most of the literature on DTG problem implicitly considers the grooming of low-speed connections onto optical channels using a TDM approach, the proposed grooming policies are evaluated here by considering a realistic traffic model which consider a Dynamic Statistical Multiplexing (DSM) approach, i.e. a single wavelength channel is shared between multiple IP elastic traffic flows

A survey on OFDM-based elastic core optical networking

Orthogonal frequency-division multiplexing (OFDM) is a modulation technology that has been widely adopted in many new and emerging broadband wireless and wireline communication systems. Due to its capability to transmit a high-speed data stream using multiple spectral-overlapped lower-speed subcarriers, OFDM technology offers superior advantages of high spectrum efficiency, robustness against inter-carrier and inter-symbol interference, adaptability to server channel conditions, etc. In recent years, there have been intensive studies on optical OFDM (O-OFDM) transmission technologies, and it is considered a promising technology for future ultra-high-speed optical transmission. Based on O-OFDM technology, a novel elastic optical network architecture with immense flexibility and scalability in spectrum allocation and data rate accommodation could be built to support diverse services and the rapid growth of Internet traffic in the future. In this paper, we present a comprehensive survey on OFDM-based elastic optical network technologies, including basic principles of OFDM, O-OFDM technologies, the architectures of OFDM-based elastic core optical networks, and related key enabling technologies. The main advantages and issues of OFDM-based elastic core optical networks that are under research are also discussed

IP multicast over WDM networks

Ph.DDOCTOR OF PHILOSOPH

Optimization, Design, and Analysis of Flexible-Grid Optical Networks with Physical-Layer Constraints

The theme of this thesis is the optimization, design, and analysis of flexible-grid optical networks that are constrained by physical-layer impairments (PLIs). We consider three flexible-grid network scenarios. The networks in the first class are static nonlinear transparent backbone networks where physical-layer resources are allocated to each traffic demand. The networks in the second class are traffic-variable nonlinear translucent backbone networks where regenerator sites are necessary to recover optical signals from the accumulated noise in long-distance transmission. The third class is data-center networks based on optical spatial division multiplexing. Within each class, our focus is primarily on an efficient and balanced allocation of network resources. Both optimization formulations and heuristic algorithms are proposed for each class. The contributions of this thesis can thus be categorized into three topics, as outlined below.First, we consider the optimization of network resources in the presence of PLI. The PLI between optical connections is characterized by the Gaussian noise (GN) model and incorporated into resource allocation algorithms. As an example, for a link-level optical communication system, the spectrum usage can be reduced by roughly up to 22% by accurately modelling the PLIs and assigning proper modulation formats and spectrum to optical connections. For resource allocation in the network level, the power spectral density of each optical connection is optimized in addition to the previously mentioned resources.As a second topic, the design of flexible-grid optical networks is studied. Specifically, we consider the regenerator location problem in traffic-variable translucent backbone networks. Due to the constantly changing traffic, the PLIs suffered by optical connections are also stochastic and, thus, have to be handled from a probabilistic perspective. A statistical network assessment process is used to characterize the noise distributions suffered by optical connections on each link, based on which a heuristic algorithm is proposed to select a set of regenerator sites with the minimum blocking probability.Finally, we study the trade-off between the blocking probability and total throughput in the modular data center networks (DCNs) based on different optical spatial division multiplexing switching schemes. This performance trade-off is caused by the coexistence of traffic demands with extremely different data rates and number of requests in DCNs. A heuristic resource allocation algorithm is proposed to enable flexible tuning of the objective function and achieve a balanced network performance

Physical Layer Impairments Aware Dynamic Lightpath Provisioning In Mixed Line Rate Wdm Networks

Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2014Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2014Bu tez çalışmasında, fiziksel katman bozukluklarını dikkate alarak, çoklu veri iletişim hızlı ağlarda dinamik olarak gelen bağlantı istekleri için ısıkyolu kurma problemi ele alınmıştır. Problemde verilenler; dinamik olarak gelen farklı kapasitelerde bağlantı istekleri, fiziksel topoloji, fiziksel hatların taşıyabildiği dalgaboyu miktarı, ağın anlık durumu ve fiziksel katman bozukluklarını dikkate alırken kullanılacak olan parametrelerdir. Problemde istenilen ise; gelen bağlantı isteklerinin mümkün olduğu kadar fazlasını kurabilmek maksadı ile uygun yol ve dalgaboyunun bulunmasıdır. Bunu gerçekleştirirken, hem kurulacak olan ışıkyolunun sinyal kalitesinin kabul edilebilir bit hata oranını karşılaması, hem de sistemde daha önceden kurulmuş olan ışıkyollarının sinyal kalitesinin kabul edilebilir sınırların altına inmesini engellemek gerekmektedir. Bu tez çalışmasında, kurulabilen ışıkyolu miktarını artırmak maksadı ile ışıkyolunun sisteme giriş gücü de ayrıca ele alınmıştır.In this thesis, we studied the impairment-aware lightpath provisioning problem for dynamic connection requests in MLR networks. Given, a dynamic connection request with a given rate, physical topology, number of wavelengths carried by each fiber, current network state, and PLI parameters, our aim is to determine the route and wavelength over which the lightpath should be set up, in order to be able to maximize the number of established connections while satisfying the given bit-error rate (BER) for the incoming connection, and to avoid disrupting the existing lightpaths. We also evaluate the launch power of the lightpath to maximize the established connections.DoktoraPh