Dynamic positioning of floating caissons based on the UKF filter under external perturbances induced by waves

This paper presents a dynamic positioning control scheme for concrete caissons in an attempt to automate part of the manoeuvres which usually require a complex deploy of personnel and equipment for port infrastructures development. The aim of this paper is to propose a control scheme, which is able to provide a reduction in costs and an improvement in security for the dynamic positioning manoeuvres . To do so, a dual loop controller is developed and the unscented Kalman filter is applied for states and perturbances estimation. Furthermore, a control allocation algorithm is proposed based on anchoring lines and winches. Finally, some simulations are performed to verify the effectiveness of the proposed approach.The Spanish FEDER/Ministry of Science, Innovation and Universities — State Research Agency (Fig. 14) is greatly acknowledged for funding our research through SAFE Project (Desarrollo de un Sistema Autónomo para el Fondeo de Estructuras para Obras Marítimas), Grant Agreement: RTC-2017-6603-4. The authors would like to thank FCC CO as a collaborator in the development of the SAFE Project. R. Guanche also acknowledges financial support from the Ramon y Cajal Program (RYC-2017-23260) of the Spanish Ministry of Science, Innovation and Universities

A Hybrid Nonlinear Model Predictive Control and Recurrent Neural Networks for Fault-Tolerant Control of an Autonomous Underwater Vehicle

The operation of Autonomous Unmanned Vehicles (AUVs) that is used for environment protection, risk evaluation and plan determination for emergency, are among the most important and challenging problems. An area that has received much attention for use of AUVs is in underwater applications where much work remains to be done to equip AUVs with systems to steer them accurately and reliably in harsh marine environments. Design of control strategies for AUVs is very challenging as compared to other systems due to their operational environment (ocean). Particularly when hydrodynamic parameters uncertainties are to be integrated into both the controller design as well as AUVs nonlinear dynamics. On the other hand, AUVs like all other mechanical systems are prone to faults. Dealing effectively with faulty situations for mechanical systems is an important consideration since faults can result in abnormal operation or even a failure. Hence, fault tolerant and fault-accommodating methods in the controller design are among active research topics for maintaining the reliability of complex AUV control systems. The objective of this thesis is to develop a nonlinear Model Predictive Control (MPC) that requires solving an online Quadratic Programming (QP) problem by using a Recurrent Neural Network (RNN). Also, an Extended Kalman Filter (EKF) is integrated with the developed scheme to provide the MPC algorithm with the system states estimates as well as a nonlinear prediction. This hybrid control approach utilizes both the mathematical model of the system as well as the adaptive nature of the intelligent technique through neural networks. The reason behind the selection of MPC is to benefit from its main capability in optimization within the current time slots while taking future time slots into consideration. The proposed control method is integrated with EKF which is an appropriate method for state estimation and data reconciliation of nonlinear systems. In order to address the high performance runtime cost of solving the MPC problem (formulated as a quadratic programming problem), an RNN is developed that has a low model complexity as well as good performance in real-time implementation. The proposed method is first developed to control an AUV following a desired trajectory. Since the problem of trajectory tracking and path following of AUVs exhibit nonlinear behavior, the effectiveness of the developed MPC-RNN algorithm is studied in comparison with two other control system methods, namely the linear MPC using Kalman Filter (KF) and the conventional nonlinear MPC using the EKF. In order to guarantee the fault-tolerant features of our proposed control method when faced with severe actuator faults, the developed MPC-RNN scheme is integrated with a dual Extended Kalman Filter that is used for a combined estimation of AUV states and parameters. The actuator faults are defined as the system parameters that are to be estimated online by the dual-EKF. Therefore, the developed Active Fault-Tolerant Control (AFTC) strategy is then applied to an AUV faced with loss of effectiveness (LOE) actuator fault scenarios while following a trajectory. Analysis and discussions regarding the comparison of the proposed AFTC method with Fault-Tolerant Nonlinear Model Predictive Control (FTNMPC) algorithm are presented in this work. The proposed approach to AFTC exploits the advantages of the MPC-RNN algorithm properties as well as accounting explicitly for severe control actuator faults in the nonlinear AUV model with uncertainties that are formulated by the MPC

LQG control for dynamic positioning of floating caissons based on the Kalman filter

This paper presents the application of an linear quadratic gaussian (LQG) control strategy for concrete caisson deployment for marine structures. Currently these maneuvers are carried out manually with the risk that this entails. Control systems for these operations with classical regulators have begun to be implemented. They try to reduce risks, but they still need to be optimized due to the complexity of the dynamics involved during the sinking process and the contact with the sea bed. A linear approximation of the dynamic model of the caisson is obtained and an LQG control strategy is implemented based on the Kalman filter (KF). The results of the proposed LQG control strategy are compared to the ones given by a classic controller. It is noted that the proposed system is positioned with greater precision and accuracy, as shown in the different simulations and in the Monte Carlo study. Furthermore, the control efforts are less than with classical regulators. For all the reasons cited above, it is concluded that there is a clear improvement in performance with the control system proposed.The Spanish FEDER/Ministry of Science, Innovation and Universities—State Research Agency is greatly acknowledged for partially funding our research through the SAFE Project (Desarrollo de un Sistema Autónomo para el Fondeo de Estructuras para Obras Marítimas), GrantAgreement: RTC-2017-6603-4. The Regional Ministry of Universities, Equality, Culture and Sports of the Gov-ernment of Cantabria has supported this work through the ControlFond project (Control De Ve-hículos Subacuáticos No Tripulados Para Supervisión De Estructuras Para Obras Marítimas Fondeadas). The authors would like to thank FCC Construcción CO as a collaborator in the de-velopment of the SAFE Project, specially Victor Florez Casillas and Nuria Cotallo Aguado (Tech-nical Direction/Hydraulic and Maritime Works) and Alvaro de Toro Mingo (Machinery Direction). R. Guanche also acknowledges financial support from the Ramon y Cajal Program (RYC-2017-23260) of the Spanish Ministry of Science, Innovation and Universities

Advances in Intelligent Vehicle Control

This book is a printed edition of the Special Issue Advances in Intelligent Vehicle Control that was published in the journal Sensors. It presents a collection of eleven papers that covers a range of topics, such as the development of intelligent control algorithms for active safety systems, smart sensors, and intelligent and efficient driving. The contributions presented in these papers can serve as useful tools for researchers who are interested in new vehicle technology and in the improvement of vehicle control systems

Optimization based solutions for control and state estimation in non-holonomic mobile robots: stability, distributed control, and relative localization

Interest in designing, manufacturing, and using autonomous robots has been rapidly growing during the most recent decade. The main motivation for this interest is the wide range of potential applications these autonomous systems can serve in. The applications include, but are not limited to, area coverage, patrolling missions, perimeter surveillance, search and rescue missions, and situational awareness. In this thesis, the area of control and state estimation in non-holonomic mobile robots is tackled. Herein, optimization based solutions for control and state estimation are designed, analyzed, and implemented to such systems. One of the main motivations for considering such solutions is their ability of handling constrained and nonlinear systems such as non-holonomic mobile robots. Moreover, the recent developments in dynamic optimization algorithms as well as in computer processing facilitated the real-time implementation of such optimization based methods in embedded computer systems. Two control problems of a single non-holonomic mobile robot are considered first; these control problems are point stabilization (regulation) and path-following. Here, a model predictive control (MPC) scheme is used to fulfill these control tasks. More precisely, a special class of MPC is considered in which terminal constraints and costs are avoided. Such constraints and costs are traditionally used in the literature to guarantee the asymptotic stability of the closed loop system. In contrast, we use a recently developed stability criterion in which the closed loop asymptotic stability can be guaranteed by appropriately choosing the prediction horizon length of the MPC controller. This method is based on finite time controllability as well as bounds on the MPC value function. Afterwards, a regulation control of a multi-robot system (MRS) is considered. In this control problem, the objective is to stabilize a group of mobile robots to form a pattern. We achieve this task using a distributed model predictive control (DMPC) scheme based on a novel communication approach between the subsystems. This newly introduced method is based on the quantization of the robots’ operating region. Therefore, the proposed communication technique allows for exchanging data in the form of integers instead of floating-point numbers. Additionally, we introduce a differential communication scheme to achieve a further reduction in the communication load. Finally, a moving horizon estimation (MHE) design for the relative state estimation (relative localization) in an MRS is developed in this thesis. In this framework, robots with less payload/computational capacity, in a given MRS, are localized and tracked using robots fitted with high-accuracy sensory/computational means. More precisely, relative measurements between these two classes of robots are used to localize the less (computationally) powerful robotic members. As a complementary part of this study, the MHE localization scheme is combined with a centralized MPC controller to provide an algorithm capable of localizing and controlling an MRS based only on relative sensory measurements. The validity and the practicality of this algorithm are assessed by realtime laboratory experiments. The conducted study fills important gaps in the application area of autonomous navigation especially those associated with optimization based solutions. Both theoretical as well as practical contributions have been introduced in this research work. Moreover, this thesis constructs a foundation for using MPC without stabilizing constraints or costs in the area of non-holonomic mobile robots