178 research outputs found
Application of the DQCA protocol to the optimization of wireless communications systems in cellular environments
This final career thesis (Master thesis) is a contribution on the enhancement of
wireless communications, specifically WLAN multi-cell systems based on the
IEEE 802.11 standard. The objectives were to propose and study different
Cross-Layer AP selection mechanisms that include single, dual and multiple
metric based criteria using PHY-MAC interactions. These mechanisms are
designed in order to improve system efficiency through the increase of the
utilization of the available transmission resources. The key idea of these
mechanisms is to make use of certain PHY and MAC parameters, other than
the traditional RSSI measurements, in order to optimize the association to the
best AP, specially focusing on the innovative use of MAC level state metrics. In
this regard, of special interest is the inclusion of MAC level AP traffic load
estimations within these association decisions.
All the proposals are based on the use of a high-performance MAC protocol
called DQCA (Distributed Queueing Collision Avoidance), which is specially
fitted to include the proposed techniques. Computer simulations have been
carried out to evaluate and quantify the benefits of the proposed mechanisms
and techniques in representative scenarios. Moreover, a completely new
handoff procedure has been designed for the DQCA muti-cell operation. This
handoff process allows implementing each of the proposed AP selection
mechanisms.
Furthermore, the interaction between a Cross-Layer scheduling technique at
the MAC level and two proposed AP selection mechanisms has also been
studied. The performance of these techniques has also been assessed by
means of computer simulations.
The analysis of the obtained results show that the proposed mechanisms
perform differently under the considered scenarios. However, the main
conclusion that can be drawn is that AP selection mechanisms that are based
on joint multiple metrics considerations (SNR, AP load, delay, etc.) perform
significantly better than those that use only single or dual metric based
mechanisms.
After the study, we can conclude that the proposed techniques and
mechanisms provide significant efficiency enhancements for DQCA-based
WLAN multi-cell systems so that all of them may be taken into account in future
wireless networks
Video QoS/QoE over IEEE802.11n/ac: A Contemporary Survey
The demand for video applications over wireless networks has tremendously increased, and IEEE 802.11 standards have provided higher support for video transmission. However, providing Quality of Service (QoS) and Quality of Experience (QoE) for video over WLAN is still a challenge due to the error sensitivity of compressed video and dynamic channels. This thesis presents a contemporary survey study on video QoS/QoE over WLAN issues and solutions. The objective of the study is to provide an overview of the issues by conducting a background study on the video codecs and their features and characteristics, followed by studying QoS and QoE support in IEEE 802.11 standards. Since IEEE 802.11n is the current standard that is mostly deployed worldwide and IEEE 802.11ac is the upcoming standard, this survey study aims to investigate the most recent video QoS/QoE solutions based on these two standards. The solutions are divided into two broad categories, academic solutions, and vendor solutions. Academic solutions are mostly based on three main layers, namely Application, Media Access Control (MAC) and Physical (PHY) which are further divided into two major categories, single-layer solutions, and cross-layer solutions. Single-layer solutions are those which focus on a single layer to enhance the video transmission performance over WLAN. Cross-layer solutions involve two or more layers to provide a single QoS solution for video over WLAN. This thesis has also presented and technically analyzed QoS solutions by three popular vendors. This thesis concludes that single-layer solutions are not directly related to video QoS/QoE, and cross-layer solutions are performing better than single-layer solutions, but they are much more complicated and not easy to be implemented. Most vendors rely on their network infrastructure to provide QoS for multimedia applications. They have their techniques and mechanisms, but the concept of providing QoS/QoE for video is almost the same because they are using the same standards and rely on Wi-Fi Multimedia (WMM) to provide QoS
Application of the DQCA protocol to the optimization of wireless communications systems in cellular environments
This final career thesis (Master thesis) is a contribution on the enhancement of
wireless communications, specifically WLAN multi-cell systems based on the
IEEE 802.11 standard. The objectives were to propose and study different
Cross-Layer AP selection mechanisms that include single, dual and multiple
metric based criteria using PHY-MAC interactions. These mechanisms are
designed in order to improve system efficiency through the increase of the
utilization of the available transmission resources. The key idea of these
mechanisms is to make use of certain PHY and MAC parameters, other than
the traditional RSSI measurements, in order to optimize the association to the
best AP, specially focusing on the innovative use of MAC level state metrics. In
this regard, of special interest is the inclusion of MAC level AP traffic load
estimations within these association decisions.
All the proposals are based on the use of a high-performance MAC protocol
called DQCA (Distributed Queueing Collision Avoidance), which is specially
fitted to include the proposed techniques. Computer simulations have been
carried out to evaluate and quantify the benefits of the proposed mechanisms
and techniques in representative scenarios. Moreover, a completely new
handoff procedure has been designed for the DQCA muti-cell operation. This
handoff process allows implementing each of the proposed AP selection
mechanisms.
Furthermore, the interaction between a Cross-Layer scheduling technique at
the MAC level and two proposed AP selection mechanisms has also been
studied. The performance of these techniques has also been assessed by
means of computer simulations.
The analysis of the obtained results show that the proposed mechanisms
perform differently under the considered scenarios. However, the main
conclusion that can be drawn is that AP selection mechanisms that are based
on joint multiple metrics considerations (SNR, AP load, delay, etc.) perform
significantly better than those that use only single or dual metric based
mechanisms.
After the study, we can conclude that the proposed techniques and
mechanisms provide significant efficiency enhancements for DQCA-based
WLAN multi-cell systems so that all of them may be taken into account in future
wireless networks
Belaidžio ryšio tinklų terpės prieigos valdymo tyrimas
Over the years, consumer requirements for Quality of Service (QoS) has been growing exponentially. Recently, the ratification process of newly IEEE 802.11ad amendment to IEEE 802.11 was finished. The IEEE 802.11ad is the newly con-sumer wireless communication approach, which will gain high spot on the 5G evolution. Major players in wireless market, such as Qualcomm already are inte-grating solutions from unlicensed band, like IEEE 802.11ac, IEEE 802.11ad into their architecture of LTE PRO (the next evolutionary step for 5G networking) (Qualcomm 2013; Parker et al. 2015). As the demand is growing both in enter-prise wireless networking and home consumer markets. Consumers started to no-tice the performance degradation due to overcrowded unlicensed bands. The un-licensed bands such as 2.4 GHz, 5 GHz are widely used for up-to-date IEEE 802.11n/ac technologies with upcoming IEEE 802.11ax. However, overusage of the available frequency leads to severe interference issue and consequences in to-tal system performance degradation, currently existing wireless medium access method can not sustain the increasing intereference and thus wireless needs a new methods of wireless medium access. The main focal point of this dissertation is to improve wireless performance in dense wireless networks. In dissertation both the conceptual and multi-band wireless medium access methods are considered both from theoretical point of view and experimental usage.
The introduction chapter presents the investigated problem and it’s objects of research as well as importance of dissertation and it’s scientific novelty in the unlicensed wireless field.
Chapter 1 revises used literature. Existing and up-to-date state-of-the-art so-lution are reviewed, evaluated and key point advantages and disadvantages are analyzed. Conclusions are drawn at the end of the chapter.
Chapter 2 describes theoretical analysis of wireless medium access protocols and the new wireless medium access method. During analysis theoretical simula-tions are performed. Conclusions are drawn at the end of the chapter.
Chapter 3 is focused on the experimental components evaluation for multi-band system, which would be in line with theoretical concept investigations. The experimental results, showed that components of multi-band system can gain sig-nificant performance increase when compared to the existing IEEE 802.11n/ac wireless systems.
General conclusions are drawn after analysis of measurement results
Contributions to QoS and energy efficiency in wi-fi networks
The Wi-Fi technology has been in the recent years fostering the proliferation of attractive mobile computing devices with broadband capabilities. Current
Wi-Fi radios though severely impact the battery duration of these devices thus limiting their potential applications.
In this thesis we present a set of contributions that address the challenge of increasing energy efficiency in Wi-Fi networks. In particular, we consider
the problem of how to optimize the trade-off between performance and energy effciency in a wide variety of use cases and applications. In this context, we introduce novel energy effcient algorithms for real-time and data applications, for distributed and centralized Wi-Fi QoS and power saving protocols and for Wi-Fi stations and Access Points.
In addition, the di¿erent algorithms presented in this thesis adhere to the following design guidelines: i) they are implemented entirely at layer two, and
can hence be easily re-used in any device with a Wi-Fi interface, ii) they do not require modi¿cations to current 802.11 standards, and can hence be readily deployed in existing Wi-Fi devices, and iii) whenever possible they favor client side solutions, and hence mobile computing devices implementing them can benefit from an increased energy efficiency regardless of the Access Point they connect to. Each of our proposed algorithms is thoroughly evaluated by means of both theoretical analysis and packet level simulations. Thus, the contributions presented in this thesis provide a realistic set of tools to improve energy efficiency in current Wi-Fi networks
Centralized random backoff for collision free wireless local area networks
Over the past few decades, wireless local area networks (WLANs) have been
widely deployed for data communication in indoor environments such as offices,
houses, and airports. In order to fairly and efficiently use the unlicensed frequency
band that Wi-Fi devices share, the devices follow a set of channel access rules,
which is called a wireless medium access control (MAC) protocol. It is known that
wireless devices following the 802.11 standard MAC protocol, i.e. the distributed
coordination function (DCF), suffer from packet collisions when multiple nodes
simultaneously transmit. This significantly degrades the throughput performance.
Recently, several studies have reported access techniques to reduce the number
of packet collisions and to achieve a collision free WLAN. Although these studies
have shown that the number of collisions can be reduced to zero in a simple
way, there have been a couple of remaining issues to solve, such as dynamic
parameter adjustment and fairness to legacy DCF nodes in terms of channel
access opportunity.
Recently, In-Band Full Duplex (IBFD) communication has received much
attention, because it has significant potential to improve the communication
capacity of a radio band. IBFD means that a node can simultaneously transmit
one signal and receive another signal in the same band at the same time. In
order to maximize the performance of IBFD communication capability and to
fairly share access to the wireless medium among distributed devices in WLANs,
a number of IBFD MAC protocols have been proposed. However, little attention
has been paid to fairness issues between half duplex nodes (i.e. nodes that can
either transmit or receive but not both simultaneously in one time-frequency
resource block) and IBFD capable nodes in the presence of the hidden node
problem
- …