Asynchronous Circuit Stacking for Simplified Power Management

As digital integrated circuits (ICs) continue to increase in complexity, new challenges arise for designers. Complex ICs are often designed by incorporating multiple power domains therefore requiring multiple voltage converters to produce the corresponding supply voltages. These converters not only take substantial on-chip layout area and/or off-chip space, but also aggregate the power loss during the voltage conversions that must occur fast enough to maintain the necessary power supplies. This dissertation work presents an asynchronous Multi-Threshold NULL Convention Logic (MTNCL) “stacked” circuit architecture that alleviates this problem by reducing the number of voltage converters needed to supply the voltage the ICs operate at. By stacking multiple MTNCL circuits between power and ground, supplying a multiple of VDD to the entire stack and incorporating simple control mechanisms, the dynamic range fluctuation problem can be mitigated. A 130nm Bulk CMOS process and a 32nm Silicon-on-Insulator (SOI) CMOS process are used to evaluate the theoretical effect of stacking different circuitry while running different workloads. Post parasitic physical implementations are then carried out in the 32nm SOI process for demonstrating the feasibility and analyzing the advantages of the proposed MTNCL stacking architecture

Comparision of Different Logic style for High Performance Wave Pipeline Circuit

High throughput and low latency designs are required in modern high performance systems, especially for signal processing applications .Existing logic families cannot provide both of them simultaneously. We propose Double Pass Transistor Logic (DPL) which can be used as a universal logic to provide finest grain pipelining without affecting overall latency or increasing the area. It  does not require  any special process steps and hence, can be  realized  in  a  normal process  technology  as  against  the CPL proposed  by  Yano et  al  [2] which uses  threshold  voltage  adjustment  of  selected  devices.  The design procedure is described for (a) low latency, (b) high throughput and (c) low area requirements. In  addition to the various  advantages,  it  is envisioned  that DPL  designs  can also be used to build ultra-high speed  pipelined system without pipelining latches, viz., wave pipelined  digital systems,  where the throughput achievable  is beyond  that permitted  by  the delay  of  a pipeline stage

First order sigma-delta modulator of an oversampling ADC design in CMOS using floating gate MOSFETS

We report a new architecture for a sigma-delta oversampling analog-to-digital converter (ADC) in which the first order modulator is realized using the floating gate MOSFETs at the input stage of an integrator and the comparator. The first order modulator is designed using an 8 MHz sampling clock frequency and implemented in a standard 1.5µm n-well CMOS process. The decimator is an off-chip sinc-filter and is programmed using the VERILOG and tested with Altera Flex EPF10K70RC240 FPGA board. The ADC gives an 8-bit resolution with a 65 kHz bandwidth

Design and Analysis of an Asynchronous Microcontroller

This dissertation presents the design of the most complex MTNCL circuit to date. A fully functional MTNCL MSP430 microcontroller is designed and benchmarked against an open source synchronous MSP430. The designs are compared in terms of area, active energy, and leakage energy. Techniques to reduce MTNCL pipeline activity and improve MTNCL register file area and power consumption are introduced. The results show the MTNCL design to have superior leakage power characteristics. The area and active energy comparisons highlight the need for better MTNCL logic synthesis techniques

Non-Volatile Memory Adaptation in Asynchronous Microcontroller for Low Leakage Power and Fast Turn-on Time

This dissertation presents an MSP430 microcontroller implementation using Multi-Threshold NULL Convention Logic (MTNCL) methodology combined with an asynchronous non-volatile magnetic random-access-memory (RAM) to achieve low leakage power and fast turn-on. This asynchronous non-volatile RAM is designed with a Spin-Transfer Torque (STT) memory device model and CMOS transistors in a 65 nm technology. A self-timed Quasi-Delay-Insensitive 1 KB STT RAM is designed with an MTNCL interface and handshaking protocol. A replica methodology is implemented to handle write operation completion detection for long state-switching delays of the STT memory device. The MTNCL MSP430 core is integrated with the STT RAM to create a fully asynchronous non-volatile microcontroller. The MSP430 architecture, the MTNCL design methodology, and the STT RAM’s low power property, along with STT RAM’s non-volatility yield multiple advantages in the MTNCL-STT RAM system for a variety of applications. For comparison, a baseline system with the same MTNCL core combined with an asynchronous CMOS RAM is designed and tested. Schematic simulation results demonstrate that the MTNCL-CMOS RAM system presents advantages in execution time and active energy over the MTNCL-STT RAM system; however, the MTNCL-STT RAM system presents unmatched advantages such as negligible leakage power, zero overhead memory power failure handling, and fast system turn-on

Concepts for on-board satellite image registration. Volume 3: Impact of VLSI/VHSIC on satellite on-board signal processing

Anticipated major advances in integrated circuit technology in the near future are described as well as their impact on satellite onboard signal processing systems. Dramatic improvements in chip density, speed, power consumption, and system reliability are expected from very large scale integration. Improvements are expected from very large scale integration enable more intelligence to be placed on remote sensing platforms in space, meeting the goals of NASA's information adaptive system concept, a major component of the NASA End-to-End Data System program. A forecast of VLSI technological advances is presented, including a description of the Defense Department's very high speed integrated circuit program, a seven-year research and development effort

An high-speed parametric ADC and a co-designed mixer for CMOS RF receivers

Dissertação apresentada na faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de ComputadoresThe rapid growth of wireless communications and the massive use of wireless end-user equipments have created a demand for low-cost, low-power and low-area devices with tight specifications imposed by standards. The advances in CMOS technology allows, nowadays, designers to implement circuits that work at high-frequencies, thus, allowing the complete implementation of RF front ends in a single chip. In this work, a co-design strategy for the implementation of a fully integrated CMOS receiver for use in the ISM band is presented. The main focus is given to the Mixer and the ADC blocks of the presented architecture. The traditional approach used in RF design requires 50 matching buffers and networks and AC coupling capacitors between Mixer inputs and LNA and LO outputs. The codesign strategy avoids the use of DC choke inductors for Mixer biasing, because it is possible to use the DC level from the output of the LNA and the LO to provide bias to the Mixer. Moreover, since the entire circuit is in the same chip and the Mixer inputs are transistors gates, we should consider voltage instead of power and avoid the 50 matching networks. The proposed ADC architecture relies on a 4-bit flash converter. The main goals are to achieve low-power and high sampling frequency. To meet these goals, parametric amplification based on MOS varactors is applied to reduce the offset voltage of the comparators, avoiding the traditional and power-consuming approach of active pre-amplification gain stages

Asynchronous Data Processing Platforms for Energy Efficiency, Performance, and Scalability

The global technology revolution is changing the integrated circuit industry from the one driven by performance to the one driven by energy, scalability and more-balanced design goals. Without clock-related issues, asynchronous circuits enable further design tradeoffs and in operation adaptive adjustments for energy efficiency. This dissertation work presents the design methodology of the asynchronous circuit using NULL Convention Logic (NCL) and multi-threshold CMOS techniques for energy efficiency and throughput optimization in digital signal processing circuits. Parallel homogeneous and heterogeneous platforms implementing adaptive dynamic voltage scaling (DVS) based on the observation of system fullness and workload prediction are developed for balanced control of the performance and energy efficiency. Datapath control logic with NULL Cycle Reduction (NCR) and arbitration network are incorporated in the heterogeneous platform for large scale cascading. The platforms have been integrated with the data processing units using the IBM 130 nm 8RF process and fabricated using the MITLL 90 nm FDSOI process. Simulation and physical testing results show the energy efficiency advantage of asynchronous designs and the effective of the adaptive DVS mechanism in balancing the energy and performance in both platforms

Research on low power technology by AC power supply circuits

制度:新 ; 報告番号:甲3692号 ; 学位の種類:博士(工学) ; 授与年月日:2012/9/15 ; 早大学位記番号:新6060Waseda Universit